Timeline
10/21/12:
- 22:57 Ticket #131 (typo in FOAMSliverCount() metric) closed by
- fixed: This is fixed in v1.1.4.
- 22:57 Ticket #129 (when gmoc.py tries to submit data, it should store the response it ...) closed by
- fixed: As of v1.1.4, the code: […] on a failing submission yields: […] …
- 22:55 Ticket #128 (make sure SNAPP partition doesn't fill before GEC15) closed by
- fixed: Kevin says: […] I think that's it for this.
- 22:47 Ticket #141 (gmoc-db2 throws a 500 error when aggregate resource measurements are ...) closed by
- duplicate: Yep, when i remove all sliver and datapath measurements, submission …
- 22:40 Ticket #141 (gmoc-db2 throws a 500 error when aggregate resource measurements are ...) created by
- My FOAM aggregate submitting to gmoc-db2 is now getting this when i …
- 22:32 Ticket #140 (client throws attribute error when reporting measurements for a FOAM ...) created by
- When i call: […] i get: […] I think this is a simple typo: …
10/19/12:
- 10:26 Ticket #134 (legacy flowvisor_state metric is missing from gmoc.py) closed by
- wontfix: I discussed this with Sarah yesterday, and concluded that legacy …
- 10:23 Ticket #130 (aggregate measurements link to bogus graphs) closed by
- fixed: Mitch determined that this problem only affects gmoc-db2, and is …
10/18/12:
- 15:12 Ticket #139 (500 internal server error on submission of measurement data to gmoc-db ...) closed by
- fixed: This happened because the change which was made on gmoc-db2, to loosen …
- 14:07 Ticket #139 (500 internal server error on submission of measurement data to gmoc-db ...) created by
- When i submit the following measurement data to gmoc-db as user …
- 13:45 Ticket #138 (NetworkStats measurement type should be valid for ResourceMapping, ...) created by
-
The
network_stats
measurement should be valid for any of a … - 11:53 Ticket #137 (orca vmserver resources reported for bbn-hn.exogeni.net:11443 ...) created by
- I am reporting the bbn-hn ORCA aggregate and its vmserver resources to …
10/17/12:
- 22:02 Ticket #136 (gmoc-db2 throws a 500 error when datapath resource measurements are ...) created by
- This code: […] run in debug mode, yields: […]
- 21:48 Ticket #135 (GMOCMeasurement.addData() does not throw an error when invoked with ...) created by
-
When this code:
[…]
is run with correct column names in
timevals
, … - 21:14 Ticket #134 (legacy flowvisor_state metric is missing from gmoc.py) created by
- Assuming the measurement client should support both the …
- 20:55 Ticket #133 (no method is provided for storing sliver measurements) created by
- If i define a measurement and attach it to a sliver object, e.g.: …
- 20:29 Ticket #132 (loadRRD() does not support types containing multiple measurements) created by
- The perl measurement_sender code supports the ability to bring in …
- 19:38 Ticket #131 (typo in FOAMSliverCount() metric) created by
- The code: […] yields: […]
- 19:32 Ticket #130 (aggregate measurements link to bogus graphs) created by
- To replicate: * Browse to …
10/16/12:
- 13:47 Ticket #129 (when gmoc.py tries to submit data, it should store the response it ...) created by
- When gmoc.py tries to submit relational or measurement data, it prints …
- 12:40 Ticket #123 (Authentication for submission of time series data fails) closed by
- fixed: Last bug fixed in v1.0.1; now i can submit the node_cpu measurement.
- 11:40 Ticket #128 (make sure SNAPP partition doesn't fill before GEC15) created by
- The partition which holds RRDs for use by SNAPP on gmoc-db is 95% …
- 11:35 Ticket #127 (add GEC14 measurements to gmoc.py measurement client) created by
- The gmoc.py client should support creation, serialization, and …
10/15/12:
- 15:09 Ticket #126 (new_user.cgi is confusing to users who already have GENI-created ...) created by
- When a new user browses to http://gmoc-db.grnoc.iu.edu/protected/, …
10/10/12:
- 11:06 Ticket #125 (Allow some parts of the UI to be accessible without a password) created by
- Portions of the UI should be accessible without a password. Mitch and …
10/09/12:
- 11:10 Ticket #124 (Make sure you can login to `gmoc.geni.net/protected`) created by
- I can't seem to login to https://gmoc.geni.net/protected without …
- 11:01 Ticket #123 (Authentication for submission of time series data fails) created by
- When submitting I get the following error: […]
10/03/12:
- 14:39 Ticket #93 (release the latest version of gmoc.py) closed by
- fixed: This is done.
- 14:23 Ticket #118 (push all submission-related changes to gmoc-db) closed by
- fixed: In addition to the changes Mitch identified in advance, we needed to …
- 14:21 Ticket #122 (sliver being submitted by foam1.gpolab.bbn.com is not updating) closed by
- fixed: Great. Now that that entry has been installed, i can: * Browse to …
- 14:09 Ticket #122 (sliver being submitted by foam1.gpolab.bbn.com is not updating) created by
- The node smyrna (foam1.gpolab.bbn.com) is submitting the relational …
- 13:51 Ticket #121 (when run out of cron, gmoc.py GMOCClient() tries and fails to write a ...) closed by
- fixed: Fixed in v0.8.1; thanks!
- 13:39 Ticket #121 (when run out of cron, gmoc.py GMOCClient() tries and fails to write a ...) created by
- When reporting is run from cron on FreeBSD 7, it throws: […]
- 13:02 Ticket #98 (the contact table does not contain a last_update field) closed by
- fixed: Here's the codepad: http://codepad.org/0yKQWDzT. The cgolubit user …
- 12:35 Ticket #120 (sliver->approved does not update in the database) closed by
- fixed: I believe this is fixed now: * …
- 12:34 Ticket #113 (sliver local_name is wrong) closed by
- fixed: This is fixed in v0.8.0.
- 11:35 Ticket #120 (sliver->approved does not update in the database) created by
- I have a sliver: […] for which i was erroneously submitting …
- 11:10 Ticket #101 (foam5.gpolab.bbn.com sliver data is not being submitted to the database) closed by
- fixed: I need to test this using a contact which is not in the database. I …
- 10:57 Ticket #119 (Consider how strict to be in verifying URNs) created by
-
#113 made a change to gmoc.py to be tolerant of
#
in URNs even …
10/02/12:
- 20:17 Ticket #118 (push all submission-related changes to gmoc-db) created by
- The changes we have made to gmoc-db2 (database schema and scripts) in …
- 20:15 Ticket #117 (the web UI should display a mapping between aggregates and resources ...) created by
- If a resource is defined as linked to an aggregate, then that resource …
- 19:36 Ticket #103 (the slice table in gmoc-db2 has unique key uuid, where the unique key ...) closed by
- fixed: Here are those two slices: […] Looks good.
- 19:35 Ticket #102 (the sliver table in gmoc-db2 has unique key uuid, where the unique key ...) closed by
- fixed: Here's that sliver i tried submitting: * Sliver entry: […] * …
- 19:34 Ticket #99 (organizations submitted via client have broken short name in database) closed by
- fixed: This is fixed. The code now strips the organization URN prefix off …
- 19:05 Ticket #108 (aggregate_instantiation version fields are not long enough for git tags) closed by
- fixed: This is fixed in the DB for aggregate too now: […]
- 19:03 Ticket #109 (gmoc.py serializes the slice creator and primary_contact as e-mail ...) closed by
- fixed: This is working now for new slices, see e.g. …
- 19:00 Ticket #116 (slice details tab should show more slice information) created by
- The "Slice Details" page of a slice's information, e.g. …
- 18:57 Ticket #115 (revisit storage of slice->creator as a principal type object) created by
- Right now, when a slice creator is instantiated, it is stored in the …
- 18:39 Ticket #114 (the database should contain a direct link between aggregates and resources) created by
- The gmoc.py client and XML schema serialize and submit resources with …
- 18:32 Ticket #105 (the contact table on gmoc-db2 has email_address as a unique key) closed by
- fixed: There are now two entries in contact which have e-mail address …
- 17:36 Ticket #113 (sliver local_name is wrong) created by
- My output is generating funny URNs: […] In particular, notice: …
- 16:48 Ticket #112 (Aggregates referenced by ID cause backend to try (and fail) to update ...) closed by
- fixed: Mitch fixed this.
- 16:42 Ticket #112 (Aggregates referenced by ID cause backend to try (and fail) to update ...) created by
- Referencing an Aggregate by ID causes the back end to die with the …
- 16:36 Ticket #94 (If reference Aggregate by ID which doesn't exist generate an error) closed by
- fixed: This works now. Closing.
- 15:53 Ticket #111 (Can't modify Aggregate type using client) created by
- I had the wrong type filled in on my aggregate. I changed it and …
- 14:22 Ticket #110 (the database should handle address, geolocation, and location the same ...) created by
- The gmoc.py client and the XML relational submission schema each …
- 13:30 Ticket #109 (gmoc.py serializes the slice creator and primary_contact as e-mail ...) created by
- Slice submission using gmoc.py is serialized as: […] Once …
- 13:03 Ticket #108 (aggregate_instantiation version fields are not long enough for git tags) created by
-
The
slice_authority_instantiation
table defines: […] However, … - 12:07 Ticket #95 (Aggregate details for ExoGENI/InstaGENI test data gives Internal ...) closed by
- fixed: I think this is fixed as long as the AM ID isn't a URL (which we no …
- 12:05 Ticket #104 (Client code rejects Aggregate IDs that are just domain names) closed by
- fixed: Kevin changed the client to parse the URL and this now works. Closing.
- 11:41 Ticket #107 (short name for slice authority in UI should be treated consistently) created by
- The new python client supports only a URN as the unique identifier for …
- 11:09 Ticket #106 (when a contact is updated and non-URN data changes, the contact entry ...) created by
- It should be possible to submit a contact entry which has the same URN …
- 10:56 Ticket #105 (the contact table on gmoc-db2 has email_address as a unique key) created by
-
The
contact
table on gmoc-db2 is defined as: […] This is … - 10:44 Ticket #96 (site metadata submission leads to duplicate address submission) closed by
- fixed: This is fixed. Before and after submission, the address table ends …
10/01/12:
- 19:03 Ticket #104 (Client code rejects Aggregate IDs that are just domain names) created by
-
An aggregate with id of
www.example.com
without thehttp://
causes … - 15:28 Ticket #103 (the slice table in gmoc-db2 has unique key uuid, where the unique key ...) created by
-
The
slice
table in gmoc-db2 is: […] However, uuids are not … - 15:16 Ticket #102 (the sliver table in gmoc-db2 has unique key uuid, where the unique key ...) created by
-
The
sliver
table in gmoc-db2 is: […] However, uuids are not … - 14:30 Ticket #101 (foam5.gpolab.bbn.com sliver data is not being submitted to the database) created by
- The following XML is successfully submitted from tau-verde …
- 14:04 Ticket #100 (POP and organization should be consistent about whether the web UI ...) created by
- The …
- 14:00 Milestone 2012-09-04 client release completed
- First release of python client for relational data submission.
- 13:51 Ticket #99 (organizations submitted via client have broken short name in database) created by
- If you submit an Organization via the client the short name is …
- 13:41 Ticket #98 (the contact table does not contain a last_update field) created by
- The gpo-infra contact in gmoc-db2 looks like this: […] There is no …
- 13:34 Ticket #97 (every time data is reported, new entries are added to *_instantiation ...) created by
-
The
aggregate_instantiation
table contains one entry for every … - 13:21 Ticket #96 (site metadata submission leads to duplicate address submission) created by
-
The
address
table on gmoc-db2 contains: […] It appears that every … - 11:52 Ticket #95 (Aggregate details for ExoGENI/InstaGENI test data gives Internal ...) created by
- This link gives me an Internal Server error: …
- 11:51 Ticket #94 (If reference Aggregate by ID which doesn't exist generate an error) created by
- Tried to reference an Aggregate by ID which did not exist. When …
- 11:37 Ticket #93 (release the latest version of gmoc.py) created by
- We need a public release of the latest version of gmoc.py at an …
- 11:17 Ticket #91 (gmoc.py XML data submission fails with an XML validation error) closed by
- fixed: Kevin found that the POP database table was being keyed by POP and org …
- 10:22 Ticket #92 (Aggregate ID validate hangs) closed by
- fixed: This looks fixed in 0.6.4.
Note: See TracTimeline
for information about the timeline view.