Version 5 (modified by, 9 years ago) (diff)


EG-EXP-7: Click Router Experiment Acceptance Test

This page captures status for the test case EG-EXP-2, which verifies a click router scenario between two racks. For overall status see the InstaGENI Acceptance Test Status page.

Last update: 2013/01/09

Test Status

This section captures the status for each step in the acceptance test plan.

Step State Date completed Ticket Comments
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16

State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.

Test Plan Steps

the following aggregate manager nicknames are used:


1. As Experimenter1, request ListResources from GPO and Utah InstaGENI

As user requested listresources from GPO and Utah InstaGENI aggregates:

$ listresources -a ig-gpo -o
$ listresources -a ig-utah -o

2. Review ListResources output from both AMs

Reviews output files rspec-instageni-gpolab-bbn-com-protogeniv2.xml and rspec-utah-geniracks-net-protogeniv2.xml to determine available resources.

3. Define a request RSpec for three VMs at BBN InstaGENI

4. Define a request RSpec for three VMs at Utah InstaGENI

5. Create slice

6. Create a sliver

In the slice IG-EXP-7 create a slivers at each AM, using the RSpecs defined above.

7. Install Click router

Download the Click Router software on the 4 nodes that will be routers in the experiment. Build the user-level Click program in the 'userlevel' directory on each of the 4 router nodes.

8. Determine Click router settings

Determine the interface to MAC address mapping, and various settings required for the 4 router node and modify click configuration.

9. Run the user-level Click router

Run the user-level Click router by providing the configuration file name as an argument on each node.

10. Log in to Host1 and send traffic to host2

Log in to Host1 and send traffic to host2 and leave traffic running.

11. Review Click logs on each Click router

16. Delete slivers

Attachments (7)

Download all attachments as: .zip