wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-7

Version 2 (modified by lnevers@bbn.com, 7 years ago) (diff)

--

EG-EXP-7: Click Router Experiment Acceptance Test

This page captures status for the test case EG-EXP-2, which verifies a click router scenario between two racks. For overall status see the InstaGENI Acceptance Test Status page.

Test Status

This section captures the status for each step in the acceptance test plan.

Step State Date completed Ticket Comments
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16


State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.


Test Plan Steps

  1. As Experimenter1, request ListResources from BBN InstaGENI, and Utah InstaGENI.
  2. Review ListResources output from both rack AMs.
  3. Define a request RSpec for three VMs at the BBN InstaGENI.
  4. Define a request RSpec for three VMs at the Utah InstaGENI.
  5. Create the first slice.
  6. Create a sliver in the first slice at each AM, using the RSpecs defined above.
  7. Download the Click Router software on the 4 nodes that will be routers in the experiment.
  8. Build the user-level Click program in the 'userlevel' directory on each of the 4 router nodes.
  9. Determine the interface to MAC address mapping, and various settings required for the 4 router node and modify click configuration.
  10. Run the user-level Click router by providing the configuration file name as an argument on each node.
  11. Log in to Host1 and send traffic to host2, leave traffic running.
  12. Review Click logs on each Click router.
  13. Stop traffic on Host2.
  14. Log in to Host1 and send traffic to host2, leave traffic running.
  15. Review Click logs on each Click router.
  16. Stop traffic on Host2.
  17. Delete sliver.

Attachments (7)

Download all attachments as: .zip