Version 40 (modified by 15 years ago) (diff) | ,
---|
Documents published by the GENI Project Office
GPO documents have the following classifications:
Adopted Recommendation - Documents that reflect the current GENI design, policy, or procedures in effect at this time.
Draft Recommendation - Candidate recommendations that are open to comments or suggested changes.
Informational - Descriptive or analytical documents intended to provide process, background, or other contextual information about GENI.
Adopted Recommendations
GENI Recommended Use Policy
GENI-INF-RUP-01.1
This document communicates common guidelines for using the suite of GENI infrastructures to the GENI community. GENI participants should be willing to follow the guidelines, and to support GENI community efforts to implement this policy.
http://groups.geni.net/geni/attachment/wiki/RUP/RUP.pdf (updated 3/10/09)
This document has a wiki page at RUP. This document has been reviewed by the OMIS working group (see GeniOmisGEC4), and is adopted for use in GENI Spiral 2.
GENI Working Groups
This document defines the structure and operations of GENI working groups. (updated 9/20/07)
http://groups.geni.net/geni/attachment/wiki/GeniWorkingGroupDoc/geni-wgs-20070920.pdf
This document has a wiki page at [GeniWorkingGroupDoc].
Draft Recommendations
GENI Spiral 2 Security Plan
GENI-SE-SY-SA-TS-S2-00.1
This document describes GENI Spiral 2 security plans. The plans presented in this document are motivated by: (1) The tremendous growth of GENI by the end of Spiral 2: By the end of Spiral 2 GENI will have been deployed in over a dozen campus networks and will have over twenty aggregates providing resources for use by experimenters, and (2) An increase in the numbers of researchers expected to use GENI for experimentation. The plans described in this document are Spiral 2 activities in preparation for this growth by Spiral 3. (3/15/10)
This documents has a wiki page at SpiralTwoSecurityPlans.
Lifecycle of a GENI Experiment
GENI-SE-SY-TS-UC-LC-01.0
This document describes an experimenter’s view of the lifecycle of an experiment in the GENI environment. The objective of this document is to understand the workflow of the experimenter and identify tools and services needed to simplify experimentation in GENI.
http://groups.geni.net/geni/attachment/wiki/ExperimentLifecycleDocument/ExperimentLifeCycle-v01.2.pdf (updated 4/30/09)
This document has a wiki page at ExperimentLifecycleDocument.
GENI System Requirements
GENI-SE-SY-RQ-02.0
This document specifies GENI system requirements. This document specifies requirements for the system as a whole: that is, all requirements listed in this document pertain to the overall system. They form the basis of further derived requirements that then flow down to the various subsystems, which are in turned captured in Requirements Documents for those subsystems.
http://groups.geni.net/geni/attachment/wiki/SysReqDoc/GENI-SE-SY-RQ-02.0.pdf (updated 7/7/09)
This document now has a wiki page at SysReqDoc.
GENI Control Framework Requirements
GENI-SE-CF-RQ-01.3
This document defines the GENI control framework subsystem, and then specifies its requirements. It is a DRAFT, to be used for discussion in the GENI Control Framework working group. Once approved, it can be used as a guide to judge the completeness of prototype control framework designs, and as a guide to their continued evolution.
http://groups.geni.net/geni/attachment/wiki/GeniControlFrameworkRequirements/010909b%20%20GENI-SE-CH-RQ-01.3.pdf (updated 1/9/09)
This document has a wiki page at GeniControlFrameworkRequirements.
GENI Instrumentation and Measurement Architecture
GENI-SE-IM-ARCH-0.1
This document defines the architecture for the GENI instrumentation and measurement subsystem. It is an early DRAFT, to be used for discussion in the GENI Instrumentation and Measurement working group, starting at the GEC7 meeting.
http://groups.geni.net/geni/attachment/wiki/GeniInstrumentationandMeasurementsArchitecture/030810%20%20GENI-SE-IM-ARCH-0.1.pdf (updated 3/8/10)
This document has a wiki page at GeniInstrumentationandMeasurementsArchitecture.
Informational
GENI Spiral 2 Overview
GENI-INF-PRO-S2-OV-1.0
This document provides an overview of GENI Spiral 2. It describes this spiral’s developmental goals and summarizes the active projects. GENI Spiral 2 runs from October 2009 through September 2010. It is the second phase of exploratory rapid-prototyping that will begin to inform technical and operational plans for the envisioned GENI suite of research infrastructure. Spiral 2's primary goal is to begin moving towards continuous experimentation. (5/28/10)
http://groups.geni.net/geni/attachment/wiki/SpiralTwo/GENIS2Ovrvw052810.pdf
Experimenter Tools and Services: Spiral 1 Capabilities
This draft document, published as an appendix to the Lifecycle of a GENI Experiment document, describes experimenter tools and services available from each of the GENI Spiral 1 clusters. (7/15/09)
http://groups.geni.net/geni/attachment/wiki/ExperimentLifecycleDocument/Spiral1-Capabilities-appendix.pdf
ProtoGENI Control Framework Overview
GENI-SE-CF-PRGO-01.3
This document provides an overview of the ProtoGENI control framework being implemented for Spiral 1, for use in Cluster C. It is a DRAFT, to be used for discussion in the GENI Control Framework working group. (Note: A review of this document by the ProtoGENI team is underway, but has not yet been completed.) It provides a description of the ProtoGENI control framework structure, a summary of how it meets the requirements as presented in the “GENI Control Framework Requirements”, and a view of its implementation at the start and the finish of Spiral 1.
http://groups.geni.net/geni/attachment/wiki/ProtoGeniControlFrameworkOverview/011409%20%20GENI-SE-CF-ProtoGENIOver-01.3.pdf (updated 1/14/09)
This document has a wiki page at ProtoGeniControlFrameworkOverview .
ORCA GENI Control Framework Overviews
GENI-SE-CF-ORGO-01.2
This document provides an overview of the ORCA GENI control framework being implemented for Spiral 1, for use in Cluster D. It is a DRAFT, to be used for discussion in the GENI Control Framework working group. (Note: A review of this document by the ORCA team is underway, but has not yet been completed.) It provides a description of the ORCA GENI control framework structure, a summary of how it meets the requirements as presented in the “GENI Control Framework Requirements”, and a view of its implementation at the start and the finish of Spiral 1.
http://groups.geni.net/geni/attachment/wiki/OrcaGeniControlFrameworkOverview/011409%20%20GENI-SE-CF-ORCAGENIOver-01.2.pdf (updated 1/9/09)
This document has a wiki page at OrcaGeniControlFrameworkOverview.
PlanetLab GENI Control Framework Overview
GENI-SE-CF-PLGO-01.2
This document provides an overview of the PlanetLab GENI control framework being implemented for Spiral 1, for use in Cluster B. It is a DRAFT, to be used for discussion in the GENI Control Framework working group. (Note: A review of this document by the PlanetLab team is underway, but has not yet been completed.) It provides a description of the PlanetLab GENI control framework structure, a summary of how it meets the requirements as presented in the “GENI Control Framework Requirements”, and a view of its implementation at the start and the finish of Spiral 1.
http://groups.geni.net/geni/attachment/wiki/PlanetLabGeniControlFrameworkOverview/011409%20%20GENI-SE-CF-PlanetLabGENIOver-01.2.pdf (updated 1/14/09)
This document has a wiki page at PlanetLabGeniControlFrameworkOverview.
GENI System Overview
GENI-SE-SY-SO-02.0
This document is intended to help readers unfamiliar to the GENI project understand the design through examples and discussions of key elements and concepts. It has been revised to reflect an improved understanding of the major subsystems and their interfaces.
http://groups.geni.net/geni/attachment/wiki/GeniSysOvrvw/GENISysOvrvw092908.pdf (updated 9/29/08)
This document has a wiki page at [GeniSysOvrvw].
GENI Spiral 1 Overview
GENI-INF-PRO-S1-OV-1.12
This document provides a brief introduction to GENI Spiral 1, the first phase of GENI prototyping. It identifies the goals of Spiral 1, the various research projects that will be integrated to form Spiral 1, and the ways in which they will be integrated. (9/29/08)
http://groups.geni.net/geni/attachment/wiki/SpiralOne/GENIS1Ovrvw092908.pdf
Spiral 1 Substrate Catalog
GENI-INF-PRO-S1-CAT-01.5
The substrate catalog provides detailed information on each of the substrate projects integrating into Spiral 1 control frameworks.(12/10/08)
http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc
A description of required information found in this document