wiki:GeniNetworkStitchingConfirmationTestStatus/UCLA

Version 19 (modified by lnevers@bbn.com, 9 years ago) (diff)

--

University of California Los Angeles Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The UCLA site advertises the following stitching details:

<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2014-11-18T18:36:25Z" >
<aggregate id="urn:publicid:IDN+instageni.idre.ucla.edu+authority+cm" url="https://www.instageni.idre.ucla.edu:123
69/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2014-11-18T18:36:25Z</start>
    <end type="time">2014-11-18T18:36:25Z</end>
</lifetime>
<node id="urn:publicid:IDN+instageni.idre.ucla.edu+node+procurve2">
  <port id="urn:publicid:IDN+instageni.idre.ucla.edu+stitchport+procurve2:1.24.al2s">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+instageni.idre.ucla.edu+interface+procurve2:1.24.al2s">
      <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.losa.net.internet2.edu:e5/1:ucla-ig</remo
teLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>1610-1629</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-al2s.rspec:

$ stitcher.py createsliver IG-ST-1a IG-ST-1-al2s.rspec -o
14:55:53 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
14:55:53 INFO    : Reading slice IG-ST-1a credential...
14:55:54 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1a expires on 2014-11-25 19:13:52 UTC
14:55:54 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
14:55:54 INFO    : Calling SCS...
14:55:57 INFO    : Multi-AM reservation will include resources from these aggregates:
14:55:57 INFO    : 	<Aggregate gpo-ig>
14:55:57 INFO    : 	<Aggregate ucla-ig>
14:55:57 INFO    : 	<Aggregate oess>
14:55:57 INFO    : 	<Aggregate ion>
14:55:57 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
14:56:15 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
14:56:15 INFO    : Stitcher doing createsliver at <Aggregate ucla-ig>...
14:56:32 INFO    : ... Allocation at <Aggregate ucla-ig> complete.
14:56:32 INFO    : Stitcher doing createsliver at <Aggregate oess>...
14:56:37 INFO    : ... Allocation at <Aggregate oess> complete.
14:56:37 INFO    : Stitcher doing createsliver at <Aggregate ion>...
14:57:26 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
14:57:26 INFO    : Pausing 30 seconds to let circuit become ready...
14:58:05 INFO    : Pausing 30 seconds to let circuit become ready...
14:58:42 INFO    : Pausing 30 seconds to let circuit become ready...
14:59:21 INFO    : DCN circuit 139281 is ready at <Aggregate ion>
14:59:30 INFO    : ... Allocation at <Aggregate ion> complete.
14:59:30 INFO    : All aggregates are complete.
14:59:30 INFO    : Your resources expire at 2014-11-24T19:45:57 (UTC). 
14:59:30 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-1a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UCLA and GPO aggregate:

$ readyToLogin.py IG-ST-1a -a ucla-ig
  ....
ig-ucla's geni_status is: ready 
User lnevers logs in to ig-ucla using:
	ssh -p 31290  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.idre.ucla.edu

$ readyToLogin.py IG-ST-1a -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 34362  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI UCLA VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-11-18

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   140 MBytes  19.6 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec  35.9 MBytes  5.01 Mbits/sec
[  6]  0.0-60.1 sec  24.6 MBytes  3.43 Mbits/sec
[  7]  0.0-60.7 sec  24.4 MBytes  3.37 Mbits/sec
[  4]  0.0-60.9 sec  28.8 MBytes  3.96 Mbits/sec
[  3]  0.0-61.0 sec  29.6 MBytes  4.07 Mbits/sec
[SUM]  0.0-61.0 sec   143 MBytes  19.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec  15.1 MBytes  2.11 Mbits/sec
[ 12]  0.0-60.3 sec  12.4 MBytes  1.72 Mbits/sec
[  9]  0.0-60.5 sec  15.0 MBytes  2.08 Mbits/sec
[  7]  0.0-60.7 sec  13.4 MBytes  1.85 Mbits/sec
[  6]  0.0-61.0 sec  15.9 MBytes  2.18 Mbits/sec
[  8]  0.0-61.0 sec  12.9 MBytes  1.77 Mbits/sec
[ 11]  0.0-61.1 sec  12.0 MBytes  1.65 Mbits/sec
[ 10]  0.0-61.2 sec  14.1 MBytes  1.94 Mbits/sec
[  3]  0.0-61.4 sec  16.1 MBytes  2.20 Mbits/sec
[  4]  0.0-61.9 sec  18.9 MBytes  2.56 Mbits/sec
[SUM]  0.0-61.9 sec   146 MBytes  19.8 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI UCLA VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512806 datagrams
[  3] Server Report:
[  3]  0.0-60.3 sec   139 MBytes  19.4 Mbits/sec  14.175 ms 413474/512801 (81%)
[  3]  0.0-60.3 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI UCLA VM

60 packets transmitted, 60 received, 0% packet loss, time 59103ms
rtt min/avg/max/mdev = 79.530/79.890/80.192/0.333 ms

Iperf InstaGENI UCLA VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-11-18

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   140 MBytes  19.5 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  33.6 MBytes  4.70 Mbits/sec
[  3]  0.0-60.1 sec  34.8 MBytes  4.85 Mbits/sec
[  4]  0.0-60.4 sec  20.8 MBytes  2.88 Mbits/sec
[  5]  0.0-60.6 sec  33.1 MBytes  4.58 Mbits/sec
[  6]  0.0-60.7 sec  21.1 MBytes  2.92 Mbits/sec
[SUM]  0.0-60.7 sec   143 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec  14.0 MBytes  1.96 Mbits/sec
[  5]  0.0-60.2 sec  20.6 MBytes  2.87 Mbits/sec
[  8]  0.0-60.5 sec  15.5 MBytes  2.15 Mbits/sec
[  4]  0.0-60.6 sec  14.8 MBytes  2.04 Mbits/sec
[ 12]  0.0-60.8 sec  12.9 MBytes  1.78 Mbits/sec
[  7]  0.0-61.2 sec  13.4 MBytes  1.83 Mbits/sec
[ 10]  0.0-61.3 sec  13.4 MBytes  1.83 Mbits/sec
[ 11]  0.0-61.6 sec  11.2 MBytes  1.53 Mbits/sec
[  3]  0.0-61.7 sec  19.0 MBytes  2.58 Mbits/sec
[  9]  0.0-61.8 sec  11.9 MBytes  1.61 Mbits/sec
[SUM]  0.0-61.8 sec   147 MBytes  19.9 Mbits/sec

Iperf InstaGENI UCLA VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512782 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  10.430 ms 413461/512779 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI UCLA VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59102ms
rtt min/avg/max/mdev = 79.545/79.884/80.234/0.288 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
15:21:12 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
15:21:12 INFO    : Reading slice IG-ST-2 credential...
15:21:12 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2014-11-25 20:21:11 UTC
15:21:12 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
15:21:12 INFO    : Calling SCS...
15:21:17 INFO    : Multi-AM reservation will include resources from these aggregates:
15:21:17 INFO    : 	<Aggregate gpo-ig>
15:21:17 INFO    : 	<Aggregate ucla-ig>
15:21:17 INFO    : 	<Aggregate oess>
15:21:17 INFO    : 	<Aggregate ion>
15:21:17 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:21:47 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:21:47 INFO    : Stitcher doing createsliver at <Aggregate ucla-ig>...
15:22:05 INFO    : ... Allocation at <Aggregate ucla-ig> complete.
15:22:05 INFO    : Stitcher doing createsliver at <Aggregate oess>...
15:22:13 INFO    : ... Allocation at <Aggregate oess> complete.
15:22:13 INFO    : Stitcher doing createsliver at <Aggregate ion>...
15:22:58 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
15:22:58 INFO    : Pausing 30 seconds to let circuit become ready...
15:23:36 INFO    : Pausing 30 seconds to let circuit become ready...
15:24:13 INFO    : DCN circuit 139331 is ready at <Aggregate ion>
15:24:13 INFO    : DCN circuit 139341 is ready at <Aggregate ion>
15:24:20 INFO    : ... Allocation at <Aggregate ion> complete.
15:24:20 INFO    : All aggregates are complete.
15:24:20 INFO    : Your resources expire at 2014-11-24T20:11:17 (UTC). 
15:24:20 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each UCLA and GPO aggregate:

$ readyToLogin.py IG-ST-2 -a ucla-ig
  ....
ig-ucla's geni_status is: ready 
User lnevers logs in to ig-ucla using:
	ssh -p 31290  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.idre.ucla.edu

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 35898  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"
1. Find login Info for hosts in slice IG-ST-2
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo

PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59078ms
rtt min/avg/max/mdev = 79.096/80.629/160.801/10.445 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59072ms
rtt min/avg/max/mdev = 79.000/80.553/159.113/10.234 ms
... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo

IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3a IG-ST-3.rspec -o
16:02:03 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
16:02:03 INFO    : Reading slice IG-ST-3a credential...
16:02:04 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3a expires on 2014-11-25 21:02:02 UTC
16:02:04 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
16:02:04 INFO    : Calling SCS...
16:02:09 INFO    : Multi-AM reservation will include resources from these aggregates:
16:02:09 INFO    : 	<Aggregate ukypks2-ig>
16:02:09 INFO    : 	<Aggregate gpo-ig>
16:02:09 INFO    : 	<Aggregate ucla-ig>
16:02:09 INFO    : 	<Aggregate oess>
16:02:09 INFO    : 	<Aggregate ion>
16:02:09 INFO    : Stitcher doing createsliver at <Aggregate ukypks2-ig>...
16:02:28 INFO    : ... Allocation at <Aggregate ukypks2-ig> complete.
16:02:28 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
16:02:48 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
16:02:48 INFO    : Stitcher doing createsliver at <Aggregate ucla-ig>...
16:03:07 INFO    : ... Allocation at <Aggregate ucla-ig> complete.
16:03:07 INFO    : Stitcher doing createsliver at <Aggregate oess>...
16:03:15 INFO    : ... Allocation at <Aggregate oess> complete.
16:03:15 INFO    : Stitcher doing createsliver at <Aggregate ion>...
16:04:01 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
16:04:01 INFO    : Pausing 30 seconds to let circuit become ready...
16:04:38 INFO    : Pausing 30 seconds to let circuit become ready...
16:05:16 INFO    : DCN circuit 139391 is ready at <Aggregate ion>
16:05:16 INFO    : DCN circuit 139381 is ready at <Aggregate ion>
16:05:23 INFO    : ... Allocation at <Aggregate ion> complete.
16:05:23 INFO    : All aggregates are complete.
16:05:23 INFO    : Your resources expire at 2014-11-24T20:52:09 (UTC). 
16:05:23 INFO    : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-3a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3a at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the UCLA host:

$ readyToLogin.py IG-ST-3a -a ucla-ig
  ....
ig-ucla's geni_status is: ready
User lnevers logs in to ig-ucla using:
       ssh -p 31546  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.idre.ucla.edu

Login to the UCLA host and ping each remote:

#ping GPO IG 
[lnevers@ig-ucla ~]$ ping 192.168.2.1 -c 60 -q 
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59071ms
rtt min/avg/max/mdev = 78.995/79.170/79.435/0.208 ms


# UKYPKS2 IG
[lnevers@ig-ucla ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59092ms
rtt min/avg/max/mdev = 68.379/69.716/141.436/9.341 ms

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 
12:42:33 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
12:42:34 INFO    : Reading slice IG-ST-4 credential...
12:42:35 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2014-11-25 20:45:27 UTC
12:42:35 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
12:42:35 INFO    : Calling SCS...
12:42:38 INFO    : Multi-AM reservation will include resources from these aggregates:
12:42:38 INFO    : 	<Aggregate ucla-ig>
12:42:38 INFO    : 	<Aggregate oess>
12:42:38 INFO    : 	<Aggregate gpo-eg>
12:42:38 INFO    : 	<Aggregate ion>
12:42:38 INFO    : Stitcher doing createsliver at <Aggregate ucla-ig>...
12:42:56 INFO    : ... Allocation at <Aggregate ucla-ig> complete.
12:42:56 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
12:43:15 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
12:43:15 INFO    : Stitcher doing createsliver at <Aggregate oess>...
12:43:20 INFO    : ... Allocation at <Aggregate oess> complete.
12:43:20 INFO    : Stitcher doing createsliver at <Aggregate ion>...
12:44:06 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
12:44:06 INFO    : Pausing 30 seconds to let circuit become ready...
12:44:44 INFO    : Pausing 30 seconds to let circuit become ready...
12:45:21 INFO    : DCN circuit 139821 is ready at <Aggregate ion>
12:45:28 INFO    : ... Allocation at <Aggregate ion> complete.
12:45:28 INFO    : All aggregates are complete.
12:45:28 INFO    : Your resources expire at 2014-11-25T17:32:38 (UTC). 
12:45:28 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UCLA and GPO aggregate:

$ readyToLogin.py IG-ST-4 -a ucla-ig
  ....
ig-ucla's geni_status is: ready 
User lnevers logs in to ig-ucla using:
	ssh -p 31546  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.idre.ucla.edu

$ readyToLogin.py IG-ST-4 -a gpo-eg
  ....

eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.24

Measurements

Iperf ExoGENI GPO VM to InstaGENI UCLA VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2014-11-20

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   184 MBytes  25.7 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec   138 MBytes  19.2 Mbits/sec
[  7]  0.0-60.1 sec   138 MBytes  19.3 Mbits/sec
[  5]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec
[  4]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec
[  3]  0.0-60.2 sec   138 MBytes  19.2 Mbits/sec
[SUM]  0.0-60.2 sec   692 MBytes  96.5 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  8]  0.0-60.1 sec  70.8 MBytes  9.88 Mbits/sec
[ 10]  0.0-60.0 sec  68.4 MBytes  9.55 Mbits/sec
[  3]  0.0-60.1 sec  68.4 MBytes  9.55 Mbits/sec
[  5]  0.0-60.2 sec  71.9 MBytes  10.0 Mbits/sec
[  6]  0.0-60.2 sec  71.9 MBytes  10.0 Mbits/sec
[  4]  0.0-60.2 sec  68.9 MBytes  9.60 Mbits/sec
[  9]  0.0-60.2 sec  70.9 MBytes  9.87 Mbits/sec
[ 12]  0.0-60.2 sec  68.1 MBytes  9.49 Mbits/sec
[ 11]  0.0-60.3 sec  68.2 MBytes  9.49 Mbits/sec
[  7]  0.0-60.4 sec  71.5 MBytes  9.93 Mbits/sec
[SUM]  0.0-60.4 sec   699 MBytes  97.0 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI UCLA VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512810 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   673 MBytes  94.1 Mbits/sec   0.084 ms 32644/512809 (6.4%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI UCLA VM

60 packets transmitted, 60 received, 0% packet loss, time 59075ms
rtt min/avg/max/mdev = 79.907/80.179/80.831/0.305 ms

Iperf InstaGENI UCLA VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-11-20

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   277 MBytes  38.7 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec   142 MBytes  19.9 Mbits/sec
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec
[  7]  0.0-60.4 sec   114 MBytes  15.9 Mbits/sec
[  4]  0.0-60.4 sec   106 MBytes  14.7 Mbits/sec
[  5]  0.0-61.0 sec   131 MBytes  18.0 Mbits/sec
[SUM]  0.0-61.0 sec   632 MBytes  87.1 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec  60.0 MBytes  8.39 Mbits/sec
[ 12]  0.0-60.0 sec  83.5 MBytes  11.7 Mbits/sec
[  3]  0.0-60.0 sec  83.5 MBytes  11.7 Mbits/sec
[  4]  0.0-60.2 sec  43.5 MBytes  6.06 Mbits/sec
[  6]  0.0-60.2 sec  44.8 MBytes  6.24 Mbits/sec
[  7]  0.0-60.2 sec  65.0 MBytes  9.06 Mbits/sec
[  8]  0.0-60.3 sec  73.6 MBytes  10.2 Mbits/sec
[ 10]  0.0-60.3 sec  52.1 MBytes  7.25 Mbits/sec
[  9]  0.0-60.3 sec  82.4 MBytes  11.5 Mbits/sec
[ 11]  0.0-60.5 sec  81.2 MBytes  11.3 Mbits/sec
[SUM]  0.0-60.5 sec   670 MBytes  92.9 Mbits/sec

Iperf InstaGENI UCLA VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512782 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   692 MBytes  96.8 Mbits/sec   0.099 ms 19123/512781 (3.7%)
[  3]  0.0-60.0 sec  8 datagrams received out-of-order

Ping from InstaGENI UCLA VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59081ms
rtt min/avg/max/mdev = 79.823/80.123/80.757/0.423 ms

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the UCLA Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Added site to the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher.py createsliver IG-ST-6a IG-ST-6.rspec -o
11:03:07 INFO    : Configured logging from file /home/lnevers/gcf-2.8-pre3/src/gcf/stitcher_logging.conf
11:03:07 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
11:03:07 INFO    : Loading config file '/home/lnevers/.gcf/omni_config'
11:03:07 INFO    : Using control framework portal
11:03:07 INFO    : Member Authority is https://ch.geni.net/MA (from config)
11:03:07 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
11:03:07 INFO    : Created slice with Name IG-ST-6a, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6a, Expiration 2015-02-02 16:03:07+00:00
Created slice with Name IG-ST-6a, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6a, Expiration 2015-02-02 16:03:07+00:00

11:03:08 INFO    : Configured logging from file /home/lnevers/gcf-2.8-pre3/src/gcf/stitcher_logging.conf
11:03:08 INFO    : Reading slice IG-ST-6a credential...
11:03:08 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6a expires on 2015-02-02 16:03:07 UTC
11:03:08 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
11:03:08 INFO    : Calling SCS...
11:03:11 INFO    : Multi-AM reservation will include resources from these aggregates:
11:03:11 INFO    : 	<Aggregate gpo-ig>
11:03:11 INFO    : 	<Aggregate ucla-ig>
11:03:11 INFO    : 	<Aggregate i2-al2s>
11:03:11 INFO    : 	<Aggregate ion>
11:03:11 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:03:29 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:03:29 INFO    : Stitcher doing createsliver at <Aggregate ucla-ig>...
11:03:46 INFO    : ... Allocation at <Aggregate ucla-ig> complete.
11:03:46 INFO    : Stitcher doing createsliver at <Aggregate i2-al2s>...
11:03:50 INFO    : ... Allocation at <Aggregate i2-al2s> complete.
11:03:50 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:04:35 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:04:35 INFO    : Pausing 30 seconds to let circuit become ready...
11:05:12 INFO    : DCN circuit 150341 is ready at <Aggregate ion>
11:05:20 INFO    : ... Allocation at <Aggregate ion> complete.
11:05:20 INFO    : All aggregates are complete.
11:05:20 INFO    : Your resources expire at 2015-02-01T15:53:11 (UTC). 
11:05:20 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-6a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-6a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UCLA and GPO aggregate:

$ readyToLogin.py --useSliceAggregates IG-ST-6a
...
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 35130  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

ig-ucla's geni_status is: ready 
User lnevers logs in to ig-ucla using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.idre.ucla.edu

Measurements

Iperf InstaGENI GPO VM to InstaGENI UCLA VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-01-26

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.3 sec   136 MBytes  18.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.2 sec  23.6 MBytes  3.29 Mbits/sec
[  4]  0.0-60.8 sec  24.6 MBytes  3.40 Mbits/sec
[  6]  0.0-60.9 sec  31.2 MBytes  4.31 Mbits/sec
[  3]  0.0-61.0 sec  28.0 MBytes  3.85 Mbits/sec
[  7]  0.0-61.7 sec  31.6 MBytes  4.30 Mbits/sec
[SUM]  0.0-61.7 sec   139 MBytes  18.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-59.5 sec  15.1 MBytes  2.13 Mbits/sec
[  6]  0.0-60.3 sec  11.1 MBytes  1.55 Mbits/sec
[ 12]  0.0-60.3 sec  20.8 MBytes  2.89 Mbits/sec
[  3]  0.0-60.4 sec  15.8 MBytes  2.19 Mbits/sec
[  7]  0.0-60.6 sec  11.4 MBytes  1.57 Mbits/sec
[  4]  0.0-60.7 sec  17.9 MBytes  2.47 Mbits/sec
[  8]  0.0-60.9 sec  18.2 MBytes  2.51 Mbits/sec
[ 11]  0.0-61.2 sec  7.62 MBytes  1.05 Mbits/sec
[ 10]  0.0-61.4 sec  13.6 MBytes  1.86 Mbits/sec
[  9]  0.0-63.0 sec  11.9 MBytes  1.58 Mbits/sec
[SUM]  0.0-63.0 sec   143 MBytes  19.1 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI UCLA VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512785 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec   8.970 ms 413817/512784 (81%)
[  3]  0.0-60.1 sec  80 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI UCLA VM

60 packets transmitted, 60 received, 0% packet loss, time 59090ms
rtt min/avg/max/mdev = 79.438/89.142/313.342/40.674 ms

Iperf InstaGENI UCLA VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-01-26

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.8 sec   136 MBytes  18.7 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  25.2 MBytes  3.53 Mbits/sec
[  6]  0.0-60.1 sec  22.5 MBytes  3.14 Mbits/sec
[  4]  0.0-60.4 sec  34.4 MBytes  4.78 Mbits/sec
[  5]  0.0-60.4 sec  26.2 MBytes  3.64 Mbits/sec
[  3]  0.0-61.1 sec  31.4 MBytes  4.31 Mbits/sec
[SUM]  0.0-61.1 sec   140 MBytes  19.2 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-58.9 sec  9.38 MBytes  1.33 Mbits/sec
[  4]  0.0-59.0 sec  17.1 MBytes  2.44 Mbits/sec
[  6]  0.0-59.0 sec  19.9 MBytes  2.83 Mbits/sec
[  8]  0.0-59.3 sec  14.2 MBytes  2.02 Mbits/sec
[ 10]  0.0-59.8 sec  11.1 MBytes  1.56 Mbits/sec
[  9]  0.0-60.5 sec  16.1 MBytes  2.24 Mbits/sec
[  3]  0.0-60.8 sec  13.0 MBytes  1.79 Mbits/sec
[ 11]  0.0-60.9 sec  12.5 MBytes  1.72 Mbits/sec
[ 12]  0.0-61.0 sec  12.4 MBytes  1.70 Mbits/sec
[  5]  0.0-61.2 sec  14.0 MBytes  1.92 Mbits/sec
[SUM]  0.0-61.2 sec   140 MBytes  19.2 Mbits/sec

Iperf InstaGENI UCLA VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512800 datagrams
[  3] Server Report:
[  3]  0.0-60.3 sec   139 MBytes  19.3 Mbits/sec  28.789 ms 413940/512797 (81%)
[  3]  0.0-60.3 sec  77 datagrams received out-of-order

Ping from InstaGENI UCLA VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59094ms
rtt min/avg/max/mdev = 79.450/94.054/683.589/82.916 ms

Email help@geni.net for GENI support or email me with feedback on this page!