University of California Los Angeles Stitching Confirmation Tests
This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.
IG-ST-1 New Site to GPO IG topology
The UCLA site advertises the following stitching details:
<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2014-11-18T18:36:25Z" > <aggregate id="urn:publicid:IDN+instageni.idre.ucla.edu+authority+cm" url="https://www.instageni.idre.ucla.edu:123 69/protogeni/xmlrpc/am"> <aggregatetype>protogeni</aggregatetype> <stitchingmode>chainANDTree</stitchingmode> <scheduledservices>false</scheduledservices> <negotiatedservices>false</negotiatedservices> <lifetime id="life"> <start type="time">2014-11-18T18:36:25Z</start> <end type="time">2014-11-18T18:36:25Z</end> </lifetime> <node id="urn:publicid:IDN+instageni.idre.ucla.edu+node+procurve2"> <port id="urn:publicid:IDN+instageni.idre.ucla.edu+stitchport+procurve2:1.24.al2s"> <capacity>1000000</capacity> <maximumReservableCapacity>1000000</maximumReservableCapacity> <minimumReservableCapacity>1000</minimumReservableCapacity> <granularity>1</granularity> <link id="urn:publicid:IDN+instageni.idre.ucla.edu+interface+procurve2:1.24.al2s"> <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.losa.net.internet2.edu:e5/1:ucla-ig</remo teLinkId> <trafficEngineeringMetric>10</trafficEngineeringMetric> <capacity>1000000</capacity> <maximumReservableCapacity>1000000</maximumReservableCapacity> <minimumReservableCapacity>1000</minimumReservableCapacity> <granularity>1</granularity> <switchingCapabilityDescriptor> <switchingcapType>l2sc</switchingcapType> <encodingType>ethernet</encodingType> <switchingCapabilitySpecificInfo> <switchingCapabilitySpecificInfo_L2sc> <interfaceMTU>1500</interfaceMTU> <vlanRangeAvailability>1610-1629</vlanRangeAvailability> <vlanTranslation>false</vlanTranslation> </switchingCapabilitySpecificInfo_L2sc> </switchingCapabilitySpecificInfo> </switchingCapabilityDescriptor> </link> </port> </node> </aggregate> </stitching>
Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.
Create a slice and then create the stitched slivers with the RSpec IG-ST-1-al2s.rspec:
$ stitcher.py createsliver IG-ST-1a IG-ST-1-al2s.rspec -o 14:55:53 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 14:55:53 INFO : Reading slice IG-ST-1a credential... 14:55:54 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1a expires on 2014-11-25 19:13:52 UTC 14:55:54 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 14:55:54 INFO : Calling SCS... 14:55:57 INFO : Multi-AM reservation will include resources from these aggregates: 14:55:57 INFO : <Aggregate gpo-ig> 14:55:57 INFO : <Aggregate ucla-ig> 14:55:57 INFO : <Aggregate oess> 14:55:57 INFO : <Aggregate ion> 14:55:57 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... 14:56:15 INFO : ... Allocation at <Aggregate gpo-ig> complete. 14:56:15 INFO : Stitcher doing createsliver at <Aggregate ucla-ig>... 14:56:32 INFO : ... Allocation at <Aggregate ucla-ig> complete. 14:56:32 INFO : Stitcher doing createsliver at <Aggregate oess>... 14:56:37 INFO : ... Allocation at <Aggregate oess> complete. 14:56:37 INFO : Stitcher doing createsliver at <Aggregate ion>... 14:57:26 INFO : DCN AM <Aggregate ion>: must wait for status ready.... 14:57:26 INFO : Pausing 30 seconds to let circuit become ready... 14:58:05 INFO : Pausing 30 seconds to let circuit become ready... 14:58:42 INFO : Pausing 30 seconds to let circuit become ready... 14:59:21 INFO : DCN circuit 139281 is ready at <Aggregate ion> 14:59:30 INFO : ... Allocation at <Aggregate ion> complete. 14:59:30 INFO : All aggregates are complete. 14:59:30 INFO : Your resources expire at 2014-11-24T19:45:57 (UTC). 14:59:30 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-1a-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
Determined login information at each UCLA and GPO aggregate:
$ readyToLogin.py IG-ST-1a -a ucla-ig .... ig-ucla's geni_status is: ready User lnevers logs in to ig-ucla using: ssh -p 31290 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.idre.ucla.edu $ readyToLogin.py IG-ST-1a -a gpo-ig .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 34362 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
Measurements
Iperf InstaGENI GPO VM to InstaGENI UCLA VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2014-11-18
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 140 MBytes 19.6 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 5] 0.0-60.1 sec 35.9 MBytes 5.01 Mbits/sec [ 6] 0.0-60.1 sec 24.6 MBytes 3.43 Mbits/sec [ 7] 0.0-60.7 sec 24.4 MBytes 3.37 Mbits/sec [ 4] 0.0-60.9 sec 28.8 MBytes 3.96 Mbits/sec [ 3] 0.0-61.0 sec 29.6 MBytes 4.07 Mbits/sec [SUM] 0.0-61.0 sec 143 MBytes 19.7 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 5] 0.0-60.1 sec 15.1 MBytes 2.11 Mbits/sec [ 12] 0.0-60.3 sec 12.4 MBytes 1.72 Mbits/sec [ 9] 0.0-60.5 sec 15.0 MBytes 2.08 Mbits/sec [ 7] 0.0-60.7 sec 13.4 MBytes 1.85 Mbits/sec [ 6] 0.0-61.0 sec 15.9 MBytes 2.18 Mbits/sec [ 8] 0.0-61.0 sec 12.9 MBytes 1.77 Mbits/sec [ 11] 0.0-61.1 sec 12.0 MBytes 1.65 Mbits/sec [ 10] 0.0-61.2 sec 14.1 MBytes 1.94 Mbits/sec [ 3] 0.0-61.4 sec 16.1 MBytes 2.20 Mbits/sec [ 4] 0.0-61.9 sec 18.9 MBytes 2.56 Mbits/sec [SUM] 0.0-61.9 sec 146 MBytes 19.8 Mbits/sec
Iperf InstaGENI GPO VM to InstaGENI UCLA VM (UDP) - UDP buffer size: 224 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512806 datagrams [ 3] Server Report: [ 3] 0.0-60.3 sec 139 MBytes 19.4 Mbits/sec 14.175 ms 413474/512801 (81%) [ 3] 0.0-60.3 sec 1 datagrams received out-of-order
Ping from InstaGENI GPO VM to the InstaGENI UCLA VM
60 packets transmitted, 60 received, 0% packet loss, time 59103ms rtt min/avg/max/mdev = 79.530/79.890/80.192/0.333 ms
Iperf InstaGENI UCLA VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2014-11-18
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 140 MBytes 19.5 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 33.6 MBytes 4.70 Mbits/sec [ 3] 0.0-60.1 sec 34.8 MBytes 4.85 Mbits/sec [ 4] 0.0-60.4 sec 20.8 MBytes 2.88 Mbits/sec [ 5] 0.0-60.6 sec 33.1 MBytes 4.58 Mbits/sec [ 6] 0.0-60.7 sec 21.1 MBytes 2.92 Mbits/sec [SUM] 0.0-60.7 sec 143 MBytes 19.8 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 6] 0.0-60.0 sec 14.0 MBytes 1.96 Mbits/sec [ 5] 0.0-60.2 sec 20.6 MBytes 2.87 Mbits/sec [ 8] 0.0-60.5 sec 15.5 MBytes 2.15 Mbits/sec [ 4] 0.0-60.6 sec 14.8 MBytes 2.04 Mbits/sec [ 12] 0.0-60.8 sec 12.9 MBytes 1.78 Mbits/sec [ 7] 0.0-61.2 sec 13.4 MBytes 1.83 Mbits/sec [ 10] 0.0-61.3 sec 13.4 MBytes 1.83 Mbits/sec [ 11] 0.0-61.6 sec 11.2 MBytes 1.53 Mbits/sec [ 3] 0.0-61.7 sec 19.0 MBytes 2.58 Mbits/sec [ 9] 0.0-61.8 sec 11.9 MBytes 1.61 Mbits/sec [SUM] 0.0-61.8 sec 147 MBytes 19.9 Mbits/sec
Iperf InstaGENI UCLA VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512782 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 10.430 ms 413461/512779 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order
Ping from InstaGENI UCLA VM to GPO InstaGENI VM
60 packets transmitted, 60 received, 0% packet loss, time 59102ms rtt min/avg/max/mdev = 79.545/79.884/80.234/0.288 ms
IG-ST-2 New Site to GPO IG Loop topology
Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:
$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o 15:21:12 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 15:21:12 INFO : Reading slice IG-ST-2 credential... 15:21:12 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2014-11-25 20:21:11 UTC 15:21:12 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 15:21:12 INFO : Calling SCS... 15:21:17 INFO : Multi-AM reservation will include resources from these aggregates: 15:21:17 INFO : <Aggregate gpo-ig> 15:21:17 INFO : <Aggregate ucla-ig> 15:21:17 INFO : <Aggregate oess> 15:21:17 INFO : <Aggregate ion> 15:21:17 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... 15:21:47 INFO : ... Allocation at <Aggregate gpo-ig> complete. 15:21:47 INFO : Stitcher doing createsliver at <Aggregate ucla-ig>... 15:22:05 INFO : ... Allocation at <Aggregate ucla-ig> complete. 15:22:05 INFO : Stitcher doing createsliver at <Aggregate oess>... 15:22:13 INFO : ... Allocation at <Aggregate oess> complete. 15:22:13 INFO : Stitcher doing createsliver at <Aggregate ion>... 15:22:58 INFO : DCN AM <Aggregate ion>: must wait for status ready.... 15:22:58 INFO : Pausing 30 seconds to let circuit become ready... 15:23:36 INFO : Pausing 30 seconds to let circuit become ready... 15:24:13 INFO : DCN circuit 139331 is ready at <Aggregate ion> 15:24:13 INFO : DCN circuit 139341 is ready at <Aggregate ion> 15:24:20 INFO : ... Allocation at <Aggregate ion> complete. 15:24:20 INFO : All aggregates are complete. 15:24:20 INFO : Your resources expire at 2014-11-24T20:11:17 (UTC). 15:24:20 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
Determined login information at each UCLA and GPO aggregate:
$ readyToLogin.py IG-ST-2 -a ucla-ig .... ig-ucla's geni_status is: ready User lnevers logs in to ig-ucla using: ssh -p 31290 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.idre.ucla.edu $ readyToLogin.py IG-ST-2 -a gpo-ig .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 35898 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com
Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:
$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice IG-ST-2 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59078ms rtt min/avg/max/mdev = 79.096/80.629/160.801/10.445 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59072ms rtt min/avg/max/mdev = 79.000/80.553/159.113/10.234 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo
IG-ST-3 New Site 3 node linear topology
Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:
$ stitcher.py createsliver IG-ST-3a IG-ST-3.rspec -o 16:02:03 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 16:02:03 INFO : Reading slice IG-ST-3a credential... 16:02:04 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3a expires on 2014-11-25 21:02:02 UTC 16:02:04 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 16:02:04 INFO : Calling SCS... 16:02:09 INFO : Multi-AM reservation will include resources from these aggregates: 16:02:09 INFO : <Aggregate ukypks2-ig> 16:02:09 INFO : <Aggregate gpo-ig> 16:02:09 INFO : <Aggregate ucla-ig> 16:02:09 INFO : <Aggregate oess> 16:02:09 INFO : <Aggregate ion> 16:02:09 INFO : Stitcher doing createsliver at <Aggregate ukypks2-ig>... 16:02:28 INFO : ... Allocation at <Aggregate ukypks2-ig> complete. 16:02:28 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... 16:02:48 INFO : ... Allocation at <Aggregate gpo-ig> complete. 16:02:48 INFO : Stitcher doing createsliver at <Aggregate ucla-ig>... 16:03:07 INFO : ... Allocation at <Aggregate ucla-ig> complete. 16:03:07 INFO : Stitcher doing createsliver at <Aggregate oess>... 16:03:15 INFO : ... Allocation at <Aggregate oess> complete. 16:03:15 INFO : Stitcher doing createsliver at <Aggregate ion>... 16:04:01 INFO : DCN AM <Aggregate ion>: must wait for status ready.... 16:04:01 INFO : Pausing 30 seconds to let circuit become ready... 16:04:38 INFO : Pausing 30 seconds to let circuit become ready... 16:05:16 INFO : DCN circuit 139391 is ready at <Aggregate ion> 16:05:16 INFO : DCN circuit 139381 is ready at <Aggregate ion> 16:05:23 INFO : ... Allocation at <Aggregate ion> complete. 16:05:23 INFO : All aggregates are complete. 16:05:23 INFO : Your resources expire at 2014-11-24T20:52:09 (UTC). 16:05:23 INFO : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-3a-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3a at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
Determined login information the UCLA host:
$ readyToLogin.py IG-ST-3a -a ucla-ig .... ig-ucla's geni_status is: ready User lnevers logs in to ig-ucla using: ssh -p 31546 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.idre.ucla.edu
Login to the UCLA host and ping each remote:
#ping GPO IG [lnevers@ig-ucla ~]$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59071ms rtt min/avg/max/mdev = 78.995/79.170/79.435/0.208 ms # UKYPKS2 IG [lnevers@ig-ucla ~]$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59092ms rtt min/avg/max/mdev = 68.379/69.716/141.436/9.341 ms
IG-ST-4 New Site to GPO EG interoperability
Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.
$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 12:42:33 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 12:42:34 INFO : Reading slice IG-ST-4 credential... 12:42:35 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2014-11-25 20:45:27 UTC 12:42:35 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 12:42:35 INFO : Calling SCS... 12:42:38 INFO : Multi-AM reservation will include resources from these aggregates: 12:42:38 INFO : <Aggregate ucla-ig> 12:42:38 INFO : <Aggregate oess> 12:42:38 INFO : <Aggregate gpo-eg> 12:42:38 INFO : <Aggregate ion> 12:42:38 INFO : Stitcher doing createsliver at <Aggregate ucla-ig>... 12:42:56 INFO : ... Allocation at <Aggregate ucla-ig> complete. 12:42:56 INFO : Stitcher doing createsliver at <Aggregate gpo-eg>... 12:43:15 INFO : ... Allocation at <Aggregate gpo-eg> complete. 12:43:15 INFO : Stitcher doing createsliver at <Aggregate oess>... 12:43:20 INFO : ... Allocation at <Aggregate oess> complete. 12:43:20 INFO : Stitcher doing createsliver at <Aggregate ion>... 12:44:06 INFO : DCN AM <Aggregate ion>: must wait for status ready.... 12:44:06 INFO : Pausing 30 seconds to let circuit become ready... 12:44:44 INFO : Pausing 30 seconds to let circuit become ready... 12:45:21 INFO : DCN circuit 139821 is ready at <Aggregate ion> 12:45:28 INFO : ... Allocation at <Aggregate ion> complete. 12:45:28 INFO : All aggregates are complete. 12:45:28 INFO : Your resources expire at 2014-11-25T17:32:38 (UTC). 12:45:28 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-4-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
Determined login information at each UCLA and GPO aggregate:
$ readyToLogin.py IG-ST-4 -a ucla-ig .... ig-ucla's geni_status is: ready User lnevers logs in to ig-ucla using: ssh -p 31546 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.idre.ucla.edu $ readyToLogin.py IG-ST-4 -a gpo-eg .... eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.24
Measurements
Iperf ExoGENI GPO VM to InstaGENI UCLA VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2014-11-20
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 184 MBytes 25.7 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 6] 0.0-60.0 sec 138 MBytes 19.2 Mbits/sec [ 7] 0.0-60.1 sec 138 MBytes 19.3 Mbits/sec [ 5] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec [ 4] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec [ 3] 0.0-60.2 sec 138 MBytes 19.2 Mbits/sec [SUM] 0.0-60.2 sec 692 MBytes 96.5 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 8] 0.0-60.1 sec 70.8 MBytes 9.88 Mbits/sec [ 10] 0.0-60.0 sec 68.4 MBytes 9.55 Mbits/sec [ 3] 0.0-60.1 sec 68.4 MBytes 9.55 Mbits/sec [ 5] 0.0-60.2 sec 71.9 MBytes 10.0 Mbits/sec [ 6] 0.0-60.2 sec 71.9 MBytes 10.0 Mbits/sec [ 4] 0.0-60.2 sec 68.9 MBytes 9.60 Mbits/sec [ 9] 0.0-60.2 sec 70.9 MBytes 9.87 Mbits/sec [ 12] 0.0-60.2 sec 68.1 MBytes 9.49 Mbits/sec [ 11] 0.0-60.3 sec 68.2 MBytes 9.49 Mbits/sec [ 7] 0.0-60.4 sec 71.5 MBytes 9.93 Mbits/sec [SUM] 0.0-60.4 sec 699 MBytes 97.0 Mbits/sec
Iperf ExoGENI GPO VM to InstaGENI UCLA VM (UDP) - UDP buffer size: 208 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512810 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 673 MBytes 94.1 Mbits/sec 0.084 ms 32644/512809 (6.4%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order
Ping from ExoGENI GPO VM to the InstaGENI UCLA VM
60 packets transmitted, 60 received, 0% packet loss, time 59075ms rtt min/avg/max/mdev = 79.907/80.179/80.831/0.305 ms
Iperf InstaGENI UCLA VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2014-11-20
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 277 MBytes 38.7 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 6] 0.0-60.0 sec 142 MBytes 19.9 Mbits/sec [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec [ 7] 0.0-60.4 sec 114 MBytes 15.9 Mbits/sec [ 4] 0.0-60.4 sec 106 MBytes 14.7 Mbits/sec [ 5] 0.0-61.0 sec 131 MBytes 18.0 Mbits/sec [SUM] 0.0-61.0 sec 632 MBytes 87.1 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 60.0 MBytes 8.39 Mbits/sec [ 12] 0.0-60.0 sec 83.5 MBytes 11.7 Mbits/sec [ 3] 0.0-60.0 sec 83.5 MBytes 11.7 Mbits/sec [ 4] 0.0-60.2 sec 43.5 MBytes 6.06 Mbits/sec [ 6] 0.0-60.2 sec 44.8 MBytes 6.24 Mbits/sec [ 7] 0.0-60.2 sec 65.0 MBytes 9.06 Mbits/sec [ 8] 0.0-60.3 sec 73.6 MBytes 10.2 Mbits/sec [ 10] 0.0-60.3 sec 52.1 MBytes 7.25 Mbits/sec [ 9] 0.0-60.3 sec 82.4 MBytes 11.5 Mbits/sec [ 11] 0.0-60.5 sec 81.2 MBytes 11.3 Mbits/sec [SUM] 0.0-60.5 sec 670 MBytes 92.9 Mbits/sec
Iperf InstaGENI UCLA VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512782 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 692 MBytes 96.8 Mbits/sec 0.099 ms 19123/512781 (3.7%) [ 3] 0.0-60.0 sec 8 datagrams received out-of-order
Ping from InstaGENI UCLA VM to ExoGENI GPO VM
60 packets transmitted, 60 received, 0% packet loss, time 59081ms rtt min/avg/max/mdev = 79.823/80.123/80.757/0.423 ms
IG-ST-5 Site Information
Various pages include stitching information for a site. Each of the following were verified for this site:
- Verified that stitching VLANs and Device URN information exists in the UCLA Aggregate page.
- Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
- Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
- Added site to the list of GENI Network Stitching Sites.
IG-ST-6 New Site OpenFlow topology
Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:
$ stitcher.py createsliver IG-ST-6a IG-ST-6.rspec -o 11:03:07 INFO : Configured logging from file /home/lnevers/gcf-2.8-pre3/src/gcf/stitcher_logging.conf 11:03:07 INFO : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache' 11:03:07 INFO : Loading config file '/home/lnevers/.gcf/omni_config' 11:03:07 INFO : Using control framework portal 11:03:07 INFO : Member Authority is https://ch.geni.net/MA (from config) 11:03:07 INFO : Slice Authority is https://ch.geni.net/SA (from config) 11:03:07 INFO : Created slice with Name IG-ST-6a, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6a, Expiration 2015-02-02 16:03:07+00:00 Created slice with Name IG-ST-6a, URN urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6a, Expiration 2015-02-02 16:03:07+00:00 11:03:08 INFO : Configured logging from file /home/lnevers/gcf-2.8-pre3/src/gcf/stitcher_logging.conf 11:03:08 INFO : Reading slice IG-ST-6a credential... 11:03:08 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6a expires on 2015-02-02 16:03:07 UTC 11:03:08 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 11:03:08 INFO : Calling SCS... 11:03:11 INFO : Multi-AM reservation will include resources from these aggregates: 11:03:11 INFO : <Aggregate gpo-ig> 11:03:11 INFO : <Aggregate ucla-ig> 11:03:11 INFO : <Aggregate i2-al2s> 11:03:11 INFO : <Aggregate ion> 11:03:11 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... 11:03:29 INFO : ... Allocation at <Aggregate gpo-ig> complete. 11:03:29 INFO : Stitcher doing createsliver at <Aggregate ucla-ig>... 11:03:46 INFO : ... Allocation at <Aggregate ucla-ig> complete. 11:03:46 INFO : Stitcher doing createsliver at <Aggregate i2-al2s>... 11:03:50 INFO : ... Allocation at <Aggregate i2-al2s> complete. 11:03:50 INFO : Stitcher doing createsliver at <Aggregate ion>... 11:04:35 INFO : DCN AM <Aggregate ion>: must wait for status ready.... 11:04:35 INFO : Pausing 30 seconds to let circuit become ready... 11:05:12 INFO : DCN circuit 150341 is ready at <Aggregate ion> 11:05:20 INFO : ... Allocation at <Aggregate ion> complete. 11:05:20 INFO : All aggregates are complete. 11:05:20 INFO : Your resources expire at 2015-02-01T15:53:11 (UTC). 11:05:20 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-6a-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-6a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
Determined login information at each UCLA and GPO aggregate:
$ readyToLogin.py --useSliceAggregates IG-ST-6a ... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 35130 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com ig-ucla's geni_status is: ready User lnevers logs in to ig-ucla using: ssh -p 31034 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.idre.ucla.edu
Measurements
Iperf InstaGENI GPO VM to InstaGENI UCLA VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2015-01-26
One Client
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.3 sec 136 MBytes 18.9 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 5] 0.0-60.2 sec 23.6 MBytes 3.29 Mbits/sec [ 4] 0.0-60.8 sec 24.6 MBytes 3.40 Mbits/sec [ 6] 0.0-60.9 sec 31.2 MBytes 4.31 Mbits/sec [ 3] 0.0-61.0 sec 28.0 MBytes 3.85 Mbits/sec [ 7] 0.0-61.7 sec 31.6 MBytes 4.30 Mbits/sec [SUM] 0.0-61.7 sec 139 MBytes 18.9 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 5] 0.0-59.5 sec 15.1 MBytes 2.13 Mbits/sec [ 6] 0.0-60.3 sec 11.1 MBytes 1.55 Mbits/sec [ 12] 0.0-60.3 sec 20.8 MBytes 2.89 Mbits/sec [ 3] 0.0-60.4 sec 15.8 MBytes 2.19 Mbits/sec [ 7] 0.0-60.6 sec 11.4 MBytes 1.57 Mbits/sec [ 4] 0.0-60.7 sec 17.9 MBytes 2.47 Mbits/sec [ 8] 0.0-60.9 sec 18.2 MBytes 2.51 Mbits/sec [ 11] 0.0-61.2 sec 7.62 MBytes 1.05 Mbits/sec [ 10] 0.0-61.4 sec 13.6 MBytes 1.86 Mbits/sec [ 9] 0.0-63.0 sec 11.9 MBytes 1.58 Mbits/sec [SUM] 0.0-63.0 sec 143 MBytes 19.1 Mbits/sec
Iperf InstaGENI GPO VM to InstaGENI UCLA VM (UDP) - UDP buffer size: 224 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512785 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec 8.970 ms 413817/512784 (81%) [ 3] 0.0-60.1 sec 80 datagrams received out-of-order
Ping from InstaGENI GPO VM to InstaGENI UCLA VM
60 packets transmitted, 60 received, 0% packet loss, time 59090ms rtt min/avg/max/mdev = 79.438/89.142/313.342/40.674 ms
Iperf InstaGENI UCLA VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2015-01-26
One Client
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.8 sec 136 MBytes 18.7 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 25.2 MBytes 3.53 Mbits/sec [ 6] 0.0-60.1 sec 22.5 MBytes 3.14 Mbits/sec [ 4] 0.0-60.4 sec 34.4 MBytes 4.78 Mbits/sec [ 5] 0.0-60.4 sec 26.2 MBytes 3.64 Mbits/sec [ 3] 0.0-61.1 sec 31.4 MBytes 4.31 Mbits/sec [SUM] 0.0-61.1 sec 140 MBytes 19.2 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 7] 0.0-58.9 sec 9.38 MBytes 1.33 Mbits/sec [ 4] 0.0-59.0 sec 17.1 MBytes 2.44 Mbits/sec [ 6] 0.0-59.0 sec 19.9 MBytes 2.83 Mbits/sec [ 8] 0.0-59.3 sec 14.2 MBytes 2.02 Mbits/sec [ 10] 0.0-59.8 sec 11.1 MBytes 1.56 Mbits/sec [ 9] 0.0-60.5 sec 16.1 MBytes 2.24 Mbits/sec [ 3] 0.0-60.8 sec 13.0 MBytes 1.79 Mbits/sec [ 11] 0.0-60.9 sec 12.5 MBytes 1.72 Mbits/sec [ 12] 0.0-61.0 sec 12.4 MBytes 1.70 Mbits/sec [ 5] 0.0-61.2 sec 14.0 MBytes 1.92 Mbits/sec [SUM] 0.0-61.2 sec 140 MBytes 19.2 Mbits/sec
Iperf InstaGENI UCLA VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512800 datagrams [ 3] Server Report: [ 3] 0.0-60.3 sec 139 MBytes 19.3 Mbits/sec 28.789 ms 413940/512797 (81%) [ 3] 0.0-60.3 sec 77 datagrams received out-of-order
Ping from InstaGENI UCLA VM to InstaGENI GPO VM
60 packets transmitted, 60 received, 0% packet loss, time 59094ms rtt min/avg/max/mdev = 79.450/94.054/683.589/82.916 ms
Email help@geni.net for GENI support or email me with feedback on this page!