wiki:GeniNetworkStitchingConfirmationTestStatus/Rutgers

Version 19 (modified by lnevers@bbn.com, 9 years ago) (diff)

--

Rutgers University Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The Rutgers site advertises the following stitching details:

<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2014-08-01T18:20:36Z" >
<aggregate id="urn:publicid:IDN+instageni.rutgers.edu+authority+cm" url="https://www.instageni.rutgers.edu:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2014-08-01T18:20:36Z</start>
    <end type="time">2014-08-01T18:20:36Z</end>
</lifetime>
<node id="urn:publicid:IDN+instageni.rutgers.edu+node+procurve2">
  <port id="urn:publicid:IDN+instageni.rutgers.edu+stitchport+procurve2:1.19.ion">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+instageni.rutgers.edu+interface+procurve2:1.19.ion">
      <remoteLinkId>urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:xe-0/2/2:rutgers-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>3730-3739</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-ion.rspec:

$ stitcher createsliver IG-ST-1 IG-ST-1-ion.rspec 
14:25:09 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
14:25:09 INFO    : Reading slice IG-ST-1 credential...
14:25:09 INFO    : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-1 expires on 2014-08-08 18:23:48 UTC
14:25:09 INFO    : Calling SCS...
14:25:10 INFO    : Multi-AM reservation will include resources from these aggregates:
14:25:10 INFO    : 	<Aggregate rutgers-ig>
14:25:10 INFO    : 	<Aggregate gpo-ig>
14:25:10 INFO    : 	<Aggregate ion>
14:25:10 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
14:25:26 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
14:25:26 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
14:25:41 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
14:25:41 INFO    : Stitcher doing createsliver at <Aggregate ion>...
14:26:26 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
14:26:26 INFO    : Pausing 30 seconds to let circuit become ready...
14:27:03 INFO    : DCN circuit 111291 is ready at <Aggregate ion>
14:27:10 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-1-for-lnevers-cred.xml
14:27:10 INFO    : ... Allocation at <Aggregate ion> complete.
14:27:10 INFO    : All aggregates are complete.
14:27:10 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-02 18:25:45 UTC at <Aggregate ion>. Second expiration is 2014-08-08T18:23:48 UTC. 
14:27:10 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-1-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-1 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 31802  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu

$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
ig-gpo's geni_status is: changing 
User lnevers logs in to ig-gpo using:
	ssh -p 37946  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-01

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   143 MBytes  19.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.2 sec  30.2 MBytes  4.21 Mbits/sec
[  5]  0.0-60.5 sec  24.8 MBytes  3.43 Mbits/sec
[  4]  0.0-60.6 sec  34.2 MBytes  4.74 Mbits/sec
[  3]  0.0-61.2 sec  27.2 MBytes  3.73 Mbits/sec
[  7]  0.0-61.3 sec  28.4 MBytes  3.88 Mbits/sec
[SUM]  0.0-61.3 sec   145 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  8]  0.0-60.2 sec  18.4 MBytes  2.56 Mbits/sec
[  3]  0.0-60.4 sec  12.0 MBytes  1.67 Mbits/sec
[  5]  0.0-60.5 sec  9.62 MBytes  1.34 Mbits/sec
[ 12]  0.0-60.6 sec  9.50 MBytes  1.32 Mbits/sec
[  6]  0.0-60.7 sec  17.9 MBytes  2.47 Mbits/sec
[  4]  0.0-60.9 sec  22.9 MBytes  3.15 Mbits/sec
[ 10]  0.0-61.0 sec  15.9 MBytes  2.18 Mbits/sec
[ 11]  0.0-61.4 sec  16.5 MBytes  2.26 Mbits/sec
[  7]  0.0-62.1 sec  15.9 MBytes  2.14 Mbits/sec
[  9]  0.0-62.2 sec  8.62 MBytes  1.16 Mbits/sec
[SUM]  0.0-62.2 sec   147 MBytes  19.8 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512813 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  12.952 ms 413453/512811 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI Rutgers VM

60 packets transmitted, 60 received, 0% packet loss, time 59108ms
rtt min/avg/max/mdev = 15.522/15.701/15.953/0.116 ms

Iperf InstaGENI Rutgers VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-01

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   143 MBytes  19.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  27.9 MBytes  3.89 Mbits/sec
[  7]  0.0-60.3 sec  36.6 MBytes  5.10 Mbits/sec
[  6]  0.0-60.4 sec  21.6 MBytes  3.01 Mbits/sec
[  4]  0.0-60.5 sec  30.4 MBytes  4.21 Mbits/sec
[  5]  0.0-60.7 sec  28.4 MBytes  3.92 Mbits/sec
[SUM]  0.0-60.7 sec   145 MBytes  20.0 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.4 sec  19.2 MBytes  2.68 Mbits/sec
[ 10]  0.0-60.5 sec  15.4 MBytes  2.13 Mbits/sec
[  9]  0.0-60.5 sec  18.1 MBytes  2.51 Mbits/sec
[ 11]  0.0-60.7 sec  13.5 MBytes  1.87 Mbits/sec
[  8]  0.0-60.8 sec  8.00 MBytes  1.10 Mbits/sec
[ 12]  0.0-60.8 sec  11.0 MBytes  1.52 Mbits/sec
[  7]  0.0-60.9 sec  12.2 MBytes  1.69 Mbits/sec
[  3]  0.0-61.0 sec  20.4 MBytes  2.80 Mbits/sec
[  5]  0.0-61.1 sec  11.8 MBytes  1.61 Mbits/sec
[  4]  0.0-62.1 sec  16.9 MBytes  2.28 Mbits/sec
[SUM]  0.0-62.1 sec   146 MBytes  19.8 Mbits/sec

Iperf InstaGENI Rutgers VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512757 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   139 MBytes  19.5 Mbits/sec   0.109 ms 413391/512752 (81%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI Rutgers VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59110ms
rtt min/avg/max/mdev = 15.399/15.701/15.905/0.121 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
15:42:04 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
15:42:04 INFO    : Reading slice IG-ST-2 credential...
15:42:04 INFO    : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-2 expires on 2014-08-08 19:10:48 UTC
15:42:04 INFO    : Calling SCS...
15:42:06 INFO    : Multi-AM reservation will include resources from these aggregates:
15:42:06 INFO    : 	<Aggregate rutgers-ig>
15:42:06 INFO    : 	<Aggregate gpo-ig>
15:42:06 INFO    : 	<Aggregate ion>
15:42:06 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
15:42:22 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
15:42:22 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:42:40 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:42:40 INFO    : Stitcher doing createsliver at <Aggregate ion>...
15:43:25 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
15:43:25 INFO    : Pausing 30 seconds to let circuit become ready...
15:44:02 INFO    : Pausing 30 seconds to let circuit become ready...
15:44:39 INFO    : DCN circuit 111341 is ready at <Aggregate ion>
15:44:39 INFO    : DCN circuit 111331 is ready at <Aggregate ion>
15:44:46 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-2-for-lnevers-cred.xml
15:44:46 INFO    : ... Allocation at <Aggregate ion> complete.
15:44:46 INFO    : All aggregates are complete.
15:44:46 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-02 19:42:44 UTC at <Aggregate ion>. Second expiration is 2014-08-08T19:10:48 UTC. 
15:44:46 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-2-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-2 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 32058  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.rutgers.edu

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....

ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 38458  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

$ ping 10.10.4.2 -c 60 -q 
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59062ms
rtt min/avg/max/mdev = 15.059/15.379/31.411/2.090 ms

$ ping 192.168.4.2 -c 60 -q
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59044ms
rtt min/avg/max/mdev = 15.050/15.373/31.460/2.095 ms

IG-ST-3 IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
10:59:36 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
10:59:37 INFO    : Reading slice IG-ST-3 credential...
10:59:37 INFO    : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-3 expires on 2014-08-11 11:58:32 UTC
10:59:37 INFO    : Calling SCS...
10:59:39 INFO    : Multi-AM reservation will include resources from these aggregates:
10:59:39 INFO    : 	<Aggregate rutgers-ig>
10:59:39 INFO    : 	<Aggregate ion>
10:59:39 INFO    : 	<Aggregate gpo-ig>
10:59:39 INFO    : 	<Aggregate utah-pg>
10:59:39 INFO    : 	<Aggregate utah-ig>
10:59:39 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
10:59:55 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
10:59:55 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:00:09 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:00:09 INFO    : Stitcher doing createsliver at <Aggregate utah-pg>...
11:00:59 INFO    : ... Allocation at <Aggregate utah-pg> complete.
11:00:59 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:01:44 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:01:44 INFO    : Pausing 30 seconds to let circuit become ready...
11:02:21 INFO    : Pausing 30 seconds to let circuit become ready...
11:02:59 INFO    : DCN circuit 111821 is ready at <Aggregate ion>
11:02:59 INFO    : DCN circuit 111811 is ready at <Aggregate ion>
11:03:06 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-3-for-lnevers-cred.xml
11:03:06 INFO    : ... Allocation at <Aggregate ion> complete.
11:03:06 INFO    : Stitcher doing createsliver at <Aggregate utah-ig>...
11:03:21 INFO    : ... Allocation at <Aggregate utah-ig> complete.
11:03:21 INFO    : All aggregates are complete.
11:03:21 INFO    : Your resources expire at 4 different times at different AMs. The first expiration is 2014-08-04 20:00:18 UTC at <Aggregate utah-pg> and <Aggregate utah-ig>. Second expiration is 2014-08-05T15:01:03 UTC. 
11:03:21 INFO    : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-3-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the Rutgers host:

$ readyToLogin.py IG-ST-3 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 32314  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.rutgers.edu

Login to the Rutgers host and ping each remote:

#ping GPO IG 
[lnevers@ig-rut ~]$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59070ms
rtt min/avg/max/mdev = 15.046/15.372/30.623/1.989 ms

# Utah IG
[lnevers@ig-rut ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59085ms
rtt min/avg/max/mdev = 87.086/87.416/87.945/0.219 ms

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

$ stitcher createslice  IG-ST-4-cap;stitcher createsliver IG-ST-4-cap ./IG-ST-4.rspec-cap 
15:19:54 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
15:19:54 INFO    : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
15:19:54 INFO    : Loading config file /home/lnevers/.gcf/omni_config
15:19:54 INFO    : Using control framework portal
15:19:54 INFO    : Member Authority is https://ch.geni.net/MA (from config)
15:19:54 INFO    : Slice Authority is https://ch.geni.net/SA (from config)
15:19:55 INFO    : Slice IG-ST-4-cap already existed - returning existing slice
15:19:55 INFO    : Created slice with Name IG-ST-4-cap, URN urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-4-cap, Expiration 2014-08-11 19:19:12+00:00
Created slice with Name IG-ST-4-cap, URN urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-4-cap, Expiration 2014-08-11 19:19:12+00:00

15:19:55 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
15:19:55 INFO    : Reading slice IG-ST-4-cap credential...
15:19:56 INFO    : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-4-cap expires on 2014-08-11 19:19:12 UTC
15:19:56 INFO    : Calling SCS...
15:19:57 INFO    : Multi-AM reservation will include resources from these aggregates:
15:19:57 INFO    : 	<Aggregate rutgers-ig>
15:19:57 INFO    : 	<Aggregate gpo-eg>
15:19:57 INFO    : 	<Aggregate ion>
15:19:57 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
15:20:12 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
15:20:12 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
15:20:21 ERROR   :  {'output': 'Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/03ffb90c-2035-43f3-b7ae-1d162f1d1574#/8e66da0f-f7a3-4113-bda9-87fa95396ded.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}}
15:20:21 INFO    : Got an error reserving resources in IG-ST-4-cap at <Aggregate gpo-eg>
15:20:22 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-4-cap at gpo-eg (got result 'False'). (no reason given)
15:20:22 INFO    : Will put <Aggregate gpo-eg> back in the pool to allocate. Got: VLAN was unavailable. Retry <Aggregate gpo-eg> 2nd time with new suggested VLANs
15:20:22 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


15:20:52 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
15:21:04 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
15:21:04 INFO    : Stitcher doing createsliver at <Aggregate ion>...
15:21:49 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
15:21:49 INFO    : Pausing 30 seconds to let circuit become ready...
15:22:26 INFO    : Pausing 30 seconds to let circuit become ready...
15:23:03 INFO    : DCN circuit 112001 is ready at <Aggregate ion>
15:23:10 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-4-cap-for-lnevers-cred.xml
15:23:10 INFO    : ... Allocation at <Aggregate ion> complete.
15:23:10 INFO    : All aggregates are complete.
15:23:10 WARNING : Did not find stitching hop 1's link in template manifest RSpec for path link-eggpo-ig
15:23:10 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-05 19:21:09 UTC at <Aggregate ion>. Second expiration is 2014-08-11T19:19:12 UTC. 
15:23:10 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-4-cap-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-4-cap at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-4 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 32058  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu

$ readyToLogin.py IG-ST-4 -a eg-sm
  ....
eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.10

Measurements

Iperf ExoGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-04

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec    675 MBytes  94.3 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec    145 MBytes  20.2 Mbits/sec
[  7]  0.0-60.0 sec    150 MBytes  20.9 Mbits/sec
[  4]  0.0-60.1 sec    139 MBytes  19.4 Mbits/sec
[  3]  0.0-60.1 sec    143 MBytes  19.9 Mbits/sec
[  6]  0.0-60.1 sec    141 MBytes  19.7 Mbits/sec
[SUM]  0.0-60.1 sec    717 MBytes    100 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec  80.9 MBytes  11.3 Mbits/sec
[  9]  0.0-60.0 sec  67.7 MBytes  9.46 Mbits/sec
[  8]  0.0-60.0 sec  74.9 MBytes  10.5 Mbits/sec
[  3]  0.0-60.1 sec  69.6 MBytes  9.72 Mbits/sec
[  7]  0.0-60.1 sec  66.7 MBytes  9.31 Mbits/sec
[ 11]  0.0-60.1 sec  74.2 MBytes  10.4 Mbits/sec
[ 10]  0.0-60.2 sec  70.6 MBytes  9.84 Mbits/sec
[ 12]  0.0-60.2 sec  70.3 MBytes  9.80 Mbits/sec
[  4]  0.0-60.2 sec  72.3 MBytes  10.1 Mbits/sec
[  5]  0.0-60.3 sec  72.7 MBytes  10.1 Mbits/sec
[SUM]  0.0-60.3 sec    720 MBytes    100 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec    719 MBytes    101 Mbits/sec
[  3] Sent 512822 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec    676 MBytes  94.6 Mbits/sec  0.067 ms 30506/512821 (5.9%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI Rutgers VM

60 packets transmitted, 60 received, 0% packet loss, time 59104ms
rtt min/avg/max/mdev = 15.118/15.835/17.994/0.335 ms

Iperf InstaGENI Rutgers VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-04

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   717 MBytes   100 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   144 MBytes  20.1 Mbits/sec
[  4]  0.0-60.0 sec   102 MBytes  14.2 Mbits/sec
[  5]  0.0-60.1 sec   165 MBytes  23.1 Mbits/sec
[  7]  0.0-60.1 sec   152 MBytes  21.2 Mbits/sec
[  6]  0.0-60.1 sec   145 MBytes  20.2 Mbits/sec
[SUM]  0.0-60.1 sec   707 MBytes  98.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec  76.9 MBytes  10.7 Mbits/sec
[  3]  0.0-60.1 sec  56.1 MBytes  7.84 Mbits/sec
[ 12]  0.0-60.0 sec  86.2 MBytes  12.0 Mbits/sec
[  6]  0.0-60.1 sec  71.2 MBytes  9.95 Mbits/sec
[ 10]  0.0-60.1 sec  82.0 MBytes  11.4 Mbits/sec
[  7]  0.0-60.2 sec  59.2 MBytes  8.26 Mbits/sec
[  9]  0.0-60.2 sec  57.4 MBytes  8.00 Mbits/sec
[ 11]  0.0-60.2 sec  62.8 MBytes  8.75 Mbits/sec
[  8]  0.0-60.3 sec  77.6 MBytes  10.8 Mbits/sec
[  4]  0.0-60.4 sec  83.2 MBytes  11.6 Mbits/sec
[SUM]  0.0-60.4 sec   713 MBytes  99.0 Mbits/sec

Iperf InstaGENI Rutgers VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512772 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   693 MBytes  96.9 Mbits/sec   0.082 ms 18378/512771 (3.6%)
[  3]  0.0-60.0 sec  69 datagrams received out-of-order

Ping from InstaGENI Rutgers VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59112ms
rtt min/avg/max/mdev = 15.493/15.820/16.102/0.107 ms

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the Rutgers Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Added site to the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o
08:55:40 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
08:55:40 INFO    : Reading slice IG-ST-6 credential...
08:55:41 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours on 2014-08-05 13:46:53 UTC
08:55:41 INFO    : Calling SCS...
08:55:42 INFO    : Multi-AM reservation will include resources from these aggregates:
08:55:42 INFO    : 	<Aggregate rutgers-ig>
08:55:42 INFO    : 	<Aggregate gpo-ig>
08:55:42 INFO    : 	<Aggregate ion>
08:55:42 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
08:55:42 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:56:00 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
08:56:00 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
08:56:00 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:56:13 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
08:56:13 INFO    : Stitcher doing createsliver at <Aggregate ion>...
08:56:14 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:56:58 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
08:56:58 INFO    : Pausing 30 seconds to let circuit become ready...
08:57:28 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:57:35 INFO    : DCN circuit 112101 is ready at <Aggregate ion>
08:57:36 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:57:43 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-6-for-lnevers-cred.xml
08:57:43 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:57:48 INFO    : ... Allocation at <Aggregate ion> complete.
08:57:48 INFO    : All aggregates are complete.
08:57:48 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-05 13:46:53 UTC at <Aggregate rutgers-ig> and <Aggregate gpo-ig>. Second expiration is 2014-08-06T12:56:18 UTC. 
08:57:48 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-6-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-6 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-6 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 32314  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu

$ readyToLogin.py IG-ST-6 -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 35130  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-05

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.4 sec   142 MBytes  19.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-59.6 sec  23.9 MBytes  3.36 Mbits/sec
[  7]  0.0-60.3 sec  28.9 MBytes  4.02 Mbits/sec
[  5]  0.0-60.5 sec  37.6 MBytes  5.22 Mbits/sec
[  6]  0.0-60.6 sec  24.6 MBytes  3.41 Mbits/sec
[  4]  0.0-60.7 sec  28.4 MBytes  3.92 Mbits/sec
[SUM]  0.0-60.7 sec   143 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.5 sec  14.2 MBytes  2.01 Mbits/sec
[  3]  0.0-59.8 sec  12.2 MBytes  1.72 Mbits/sec
[ 12]  0.0-60.0 sec  10.9 MBytes  1.52 Mbits/sec
[  5]  0.0-60.2 sec  19.0 MBytes  2.65 Mbits/sec
[ 11]  0.0-60.4 sec  19.5 MBytes  2.71 Mbits/sec
[ 10]  0.0-60.6 sec  19.0 MBytes  2.63 Mbits/sec
[  9]  0.0-60.8 sec  13.8 MBytes  1.90 Mbits/sec
[  8]  0.0-60.8 sec  10.4 MBytes  1.43 Mbits/sec
[  7]  0.0-60.8 sec  12.2 MBytes  1.69 Mbits/sec
[  6]  0.0-61.1 sec  13.9 MBytes  1.91 Mbits/sec
[SUM]  0.0-61.1 sec   145 MBytes  19.9 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512785 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  17.103 ms 413628/512780 (81%)
[  3]  0.0-60.2 sec  53 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI Rutgers VM

60 packets transmitted, 60 received, 0% packet loss, time 59113ms
rtt min/avg/max/mdev = 15.607/19.550/129.258/18.010 ms

Iperf InstaGENI Rutgers VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-05

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.3 sec   142 MBytes  19.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec  24.4 MBytes  3.40 Mbits/sec
[  3]  0.0-60.2 sec  30.4 MBytes  4.23 Mbits/sec
[  4]  0.0-60.5 sec  28.0 MBytes  3.88 Mbits/sec
[  6]  0.0-60.8 sec  36.2 MBytes  5.00 Mbits/sec
[  7]  0.0-60.8 sec  25.0 MBytes  3.45 Mbits/sec
[SUM]  0.0-60.8 sec   144 MBytes  19.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.3 sec  19.2 MBytes  2.72 Mbits/sec
[  6]  0.0-59.3 sec  17.6 MBytes  2.49 Mbits/sec
[  5]  0.0-59.4 sec  15.6 MBytes  2.21 Mbits/sec
[  8]  0.0-59.8 sec  17.1 MBytes  2.40 Mbits/sec
[ 10]  0.0-59.9 sec  11.9 MBytes  1.66 Mbits/sec
[ 11]  0.0-60.8 sec  11.9 MBytes  1.64 Mbits/sec
[  3]  0.0-60.8 sec  13.0 MBytes  1.79 Mbits/sec
[  9]  0.0-60.9 sec  12.2 MBytes  1.69 Mbits/sec
[ 12]  0.0-61.2 sec  14.6 MBytes  2.00 Mbits/sec
[  7]  0.0-61.4 sec  14.4 MBytes  1.97 Mbits/sec
[SUM]  0.0-61.4 sec   148 MBytes  20.2 Mbits/sec

Iperf InstaGENI Rutgers VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512775 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec   8.113 ms 413685/512774 (81%)
[  3]  0.0-60.2 sec  70 datagrams received out-of-order

Ping from InstaGENI Rutgers VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59110ms
rtt min/avg/max/mdev = 15.515/19.903/167.644/21.451 ms