wiki:GeniNetworkStitchingConfirmationTestStatus/Rutgers

Rutgers University Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The Rutgers site advertises the following stitching details:

<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2014-12-01T20:09:27Z" >
<aggregate id="urn:publicid:IDN+instageni.rutgers.edu+authority+cm" url="https://www.instageni.rutgers.edu:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2014-12-01T20:09:27Z</start>
    <end type="time">2014-12-01T20:09:27Z</end>
</lifetime>
<node id="urn:publicid:IDN+instageni.rutgers.edu+node+procurve2">
  <port id="urn:publicid:IDN+instageni.rutgers.edu+stitchport+procurve2:1.19.ion">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+instageni.rutgers.edu+interface+procurve2:1.19.ion">
      <remoteLinkId>urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:xe-0/2/2:rutgers-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>3730-3739</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
  <port id="urn:publicid:IDN+instageni.rutgers.edu+stitchport+procurve2:1.19.al2s">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+instageni.rutgers.edu+interface+procurve2:1.19.al2s">
      <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.newy32aoa.net.internet2.edu:e15/6:rutgers-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>3740-3750</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>

ION Tests

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-ion.rspec:

$ stitcher createsliver IG-ST-1 IG-ST-1-ion.rspec 
14:25:09 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
14:25:09 INFO    : Reading slice IG-ST-1 credential...
14:25:09 INFO    : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-1 expires on 2014-08-08 18:23:48 UTC
14:25:09 INFO    : Calling SCS...
14:25:10 INFO    : Multi-AM reservation will include resources from these aggregates:
14:25:10 INFO    : 	<Aggregate rutgers-ig>
14:25:10 INFO    : 	<Aggregate gpo-ig>
14:25:10 INFO    : 	<Aggregate ion>
14:25:10 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
14:25:26 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
14:25:26 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
14:25:41 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
14:25:41 INFO    : Stitcher doing createsliver at <Aggregate ion>...
14:26:26 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
14:26:26 INFO    : Pausing 30 seconds to let circuit become ready...
14:27:03 INFO    : DCN circuit 111291 is ready at <Aggregate ion>
14:27:10 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-1-for-lnevers-cred.xml
14:27:10 INFO    : ... Allocation at <Aggregate ion> complete.
14:27:10 INFO    : All aggregates are complete.
14:27:10 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-02 18:25:45 UTC at <Aggregate ion>. Second expiration is 2014-08-08T18:23:48 UTC. 
14:27:10 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-1-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-1 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 31802  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu

$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
ig-gpo's geni_status is: changing 
User lnevers logs in to ig-gpo using:
	ssh -p 37946  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-01

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   143 MBytes  19.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.2 sec  30.2 MBytes  4.21 Mbits/sec
[  5]  0.0-60.5 sec  24.8 MBytes  3.43 Mbits/sec
[  4]  0.0-60.6 sec  34.2 MBytes  4.74 Mbits/sec
[  3]  0.0-61.2 sec  27.2 MBytes  3.73 Mbits/sec
[  7]  0.0-61.3 sec  28.4 MBytes  3.88 Mbits/sec
[SUM]  0.0-61.3 sec   145 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  8]  0.0-60.2 sec  18.4 MBytes  2.56 Mbits/sec
[  3]  0.0-60.4 sec  12.0 MBytes  1.67 Mbits/sec
[  5]  0.0-60.5 sec  9.62 MBytes  1.34 Mbits/sec
[ 12]  0.0-60.6 sec  9.50 MBytes  1.32 Mbits/sec
[  6]  0.0-60.7 sec  17.9 MBytes  2.47 Mbits/sec
[  4]  0.0-60.9 sec  22.9 MBytes  3.15 Mbits/sec
[ 10]  0.0-61.0 sec  15.9 MBytes  2.18 Mbits/sec
[ 11]  0.0-61.4 sec  16.5 MBytes  2.26 Mbits/sec
[  7]  0.0-62.1 sec  15.9 MBytes  2.14 Mbits/sec
[  9]  0.0-62.2 sec  8.62 MBytes  1.16 Mbits/sec
[SUM]  0.0-62.2 sec   147 MBytes  19.8 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512813 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  12.952 ms 413453/512811 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI Rutgers VM

60 packets transmitted, 60 received, 0% packet loss, time 59108ms
rtt min/avg/max/mdev = 15.522/15.701/15.953/0.116 ms

Iperf InstaGENI Rutgers VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-01

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   143 MBytes  19.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  27.9 MBytes  3.89 Mbits/sec
[  7]  0.0-60.3 sec  36.6 MBytes  5.10 Mbits/sec
[  6]  0.0-60.4 sec  21.6 MBytes  3.01 Mbits/sec
[  4]  0.0-60.5 sec  30.4 MBytes  4.21 Mbits/sec
[  5]  0.0-60.7 sec  28.4 MBytes  3.92 Mbits/sec
[SUM]  0.0-60.7 sec   145 MBytes  20.0 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.4 sec  19.2 MBytes  2.68 Mbits/sec
[ 10]  0.0-60.5 sec  15.4 MBytes  2.13 Mbits/sec
[  9]  0.0-60.5 sec  18.1 MBytes  2.51 Mbits/sec
[ 11]  0.0-60.7 sec  13.5 MBytes  1.87 Mbits/sec
[  8]  0.0-60.8 sec  8.00 MBytes  1.10 Mbits/sec
[ 12]  0.0-60.8 sec  11.0 MBytes  1.52 Mbits/sec
[  7]  0.0-60.9 sec  12.2 MBytes  1.69 Mbits/sec
[  3]  0.0-61.0 sec  20.4 MBytes  2.80 Mbits/sec
[  5]  0.0-61.1 sec  11.8 MBytes  1.61 Mbits/sec
[  4]  0.0-62.1 sec  16.9 MBytes  2.28 Mbits/sec
[SUM]  0.0-62.1 sec   146 MBytes  19.8 Mbits/sec

Iperf InstaGENI Rutgers VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512757 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   139 MBytes  19.5 Mbits/sec   0.109 ms 413391/512752 (81%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI Rutgers VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59110ms
rtt min/avg/max/mdev = 15.399/15.701/15.905/0.121 ms

AL2S Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-al2s.rspec:

$ stitcher.py createsliver IG-ST-1a IG-ST-1-al2s.rspec -o  --excludehop urn:publicid:IDN+instageni.rutgers.edu+interface+procurve2:1.19.ion
15:40:01 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
15:40:02 INFO    : Reading slice IG-ST-1a credential...
15:40:02 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1a expires on 2014-12-08 20:39:54 UTC
15:40:02 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
15:40:02 INFO    : Calling SCS...
15:40:04 INFO    : Multi-AM reservation will include resources from these aggregates:
15:40:04 INFO    : 	<Aggregate rutgers-ig>
15:40:04 INFO    : 	<Aggregate gpo-ig>
15:40:04 INFO    : 	<Aggregate oess>
15:40:04 INFO    : 	<Aggregate ion>
15:40:04 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
15:40:22 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
15:40:22 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:40:37 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:40:37 INFO    : Stitcher doing createsliver at <Aggregate oess>...
15:40:41 INFO    : ... Allocation at <Aggregate oess> complete.
15:40:41 INFO    : Stitcher doing createsliver at <Aggregate ion>...
15:41:27 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
15:41:27 INFO    : Pausing 30 seconds to let circuit become ready...
15:42:04 INFO    : DCN circuit 141491 is ready at <Aggregate ion>
15:42:11 INFO    : ... Allocation at <Aggregate ion> complete.
15:42:11 INFO    : All aggregates are complete.
15:42:11 INFO    : Your resources expire at 2014-12-07T20:30:04 (UTC). 
15:42:11 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-1a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-1a -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.rutgers.edu

$ readyToLogin.py IG-ST-1a -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 32570  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-12-01

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   142 MBytes  19.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec  30.4 MBytes  4.24 Mbits/sec
[  6]  0.0-60.2 sec  26.5 MBytes  3.69 Mbits/sec
[  7]  0.0-60.4 sec  34.9 MBytes  4.85 Mbits/sec
[  3]  0.0-60.4 sec  29.6 MBytes  4.11 Mbits/sec
[  4]  0.0-60.5 sec  23.1 MBytes  3.21 Mbits/sec
[SUM]  0.0-60.5 sec   144 MBytes  20.0 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-59.5 sec  10.5 MBytes  1.48 Mbits/sec
[  4]  0.0-59.8 sec  18.8 MBytes  2.63 Mbits/sec
[  8]  0.0-59.9 sec  13.1 MBytes  1.84 Mbits/sec
[  9]  0.0-60.0 sec  13.4 MBytes  1.87 Mbits/sec
[ 10]  0.0-60.2 sec  13.0 MBytes  1.81 Mbits/sec
[ 12]  0.0-60.8 sec  10.9 MBytes  1.50 Mbits/sec
[ 11]  0.0-60.8 sec  16.5 MBytes  2.28 Mbits/sec
[  6]  0.0-61.0 sec  13.1 MBytes  1.80 Mbits/sec
[  7]  0.0-61.2 sec  22.2 MBytes  3.05 Mbits/sec
[  5]  0.0-61.3 sec  14.6 MBytes  2.00 Mbits/sec
[SUM]  0.0-61.3 sec   146 MBytes  20.0 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512802 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  10.410 ms 413472/512799 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI Rutgers VM

60 packets transmitted, 59 received, 1% packet loss, time 59085ms
rtt min/avg/max/mdev = 8.797/9.238/9.539/0.173 ms

Iperf InstaGENI Rutgers VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-12-01

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   142 MBytes  19.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  29.1 MBytes  4.07 Mbits/sec
[  6]  0.0-60.2 sec  22.4 MBytes  3.12 Mbits/sec
[  7]  0.0-60.3 sec  26.2 MBytes  3.65 Mbits/sec
[  5]  0.0-60.7 sec  35.5 MBytes  4.91 Mbits/sec
[  4]  0.0-60.8 sec  31.1 MBytes  4.30 Mbits/sec
[SUM]  0.0-60.8 sec   144 MBytes  19.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  20.5 MBytes  2.87 Mbits/sec
[  3]  0.0-60.1 sec  11.9 MBytes  1.66 Mbits/sec
[ 12]  0.0-60.9 sec  10.6 MBytes  1.46 Mbits/sec
[  9]  0.0-61.0 sec  14.4 MBytes  1.98 Mbits/sec
[  4]  0.0-61.0 sec  20.0 MBytes  2.75 Mbits/sec
[  8]  0.0-61.1 sec  12.5 MBytes  1.72 Mbits/sec
[ 11]  0.0-61.1 sec  11.9 MBytes  1.63 Mbits/sec
[  6]  0.0-61.1 sec  17.1 MBytes  2.35 Mbits/sec
[  5]  0.0-61.7 sec  13.4 MBytes  1.82 Mbits/sec
[ 10]  0.0-62.2 sec  14.5 MBytes  1.96 Mbits/sec
[SUM]  0.0-62.2 sec   147 MBytes  19.8 Mbits/sec

Iperf InstaGENI Rutgers VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512774 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  13.022 ms 413442/512771 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI Rutgers VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59086ms
rtt min/avg/max/mdev = 9.098/9.290/9.702/0.143 ms

Special Test Case

Because the Rutgers Site is connected to New York as is GPO, an additional test is run to introduce some hops between the endpoints. This test will connect Rutgers IG rack to the Chicago IG rack via AL2S. Create a slice and then create the stitched slivers with the RSpec IG-ST-1-chic-rut.rspec:

$ stitcher.py createsliver IG-ST-1a IG-ST-1-chic-rut.rspec -o --excludehop urn:publicid:IDN+instageni.rutgers.edu+interface+procurve2:1.19.ion
13:19:09 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
13:19:10 INFO    : Reading slice IG-ST-1a credential...
13:19:10 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1a expires on 2014-12-08 20:39:54 UTC
13:19:10 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
13:19:10 INFO    : Calling SCS...
13:19:13 INFO    : Multi-AM reservation will include resources from these aggregates:
13:19:13 INFO    : 	<Aggregate chicago-ig>
13:19:13 INFO    : 	<Aggregate rutgers-ig>
13:19:13 INFO    : 	<Aggregate oess>
13:19:13 INFO    : Stitcher doing createsliver at <Aggregate chicago-ig>...
13:19:30 INFO    : ... Allocation at <Aggregate chicago-ig> complete.
13:19:30 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
13:19:48 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
13:19:48 INFO    : Stitcher doing createsliver at <Aggregate oess>...
13:19:51 ERROR   :  {'output': 'Exception: requested VLAN unavailable: sdn-sw.newy32aoa.net.internet2.edu,eth15/6 VLAN=3744', 'code': {'geni_code': 24}}
13:19:51 WARNING : Stitching failed but will retry: Circuit reservation failed at <Aggregate oess>. Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: sdn-sw.newy32aoa.net.internet2.edu,eth15/6 VLAN=3744.))
13:19:51 INFO    : Deleting existing reservations...
13:19:51 INFO    : Doing deletesliver at <Aggregate chicago-ig>...
13:21:21 ERROR   :  {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+geni.uchicago.edu+log+0c989581fcda6581dcda8c2d4e2ad984', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://www.geni.uchicago.edu/spewlogfile.php3?logfile=0c989581fcda6581dcda8c2d4e2ad984'}, 'value': 0}
13:23:00 INFO    : Deleted reservation at <Aggregate chicago-ig>.
13:23:00 INFO    : Doing deletesliver at <Aggregate rutgers-ig>...
13:23:25 INFO    : Deleted reservation at <Aggregate rutgers-ig>.
13:23:25 INFO    : Calling SCS for the 2nd time...
13:23:27 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


13:23:57 INFO    : Multi-AM reservation will include resources from these aggregates:
13:23:57 INFO    : 	<Aggregate chicago-ig>
13:23:57 INFO    : 	<Aggregate rutgers-ig>
13:23:57 INFO    : 	<Aggregate oess>
13:23:57 INFO    : Stitcher doing createsliver at <Aggregate chicago-ig>...
13:24:17 INFO    : ... Allocation at <Aggregate chicago-ig> complete.
13:24:17 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
13:24:33 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
13:24:33 INFO    : Stitcher doing createsliver at <Aggregate oess>...
13:24:38 INFO    : ... Allocation at <Aggregate oess> complete.
13:24:38 INFO    : All aggregates are complete.
13:24:38 INFO    : Your resources expire at 2014-12-08T18:13:57 (UTC). 
13:24:38 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-1a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1a at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at the Rutgers aggregate:

$ readyToLogin.py IG-ST-1a -a rutgers-ig
  ....
rut-ig's geni_status is: ready 
User lnevers logs in to rut-ig using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.rutgers.edu

Verify connectivity with remote site Chicago IG:

lnevers@rut-ig:~$ ping 192.168.1.2 -c 60 -q
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.

--- 192.168.1.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 58997ms
rtt min/avg/max/mdev = 0.023/0.026/0.058/0.007 ms

IG-ST-2 New Site to GPO IG Loop topology

ION Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
15:42:04 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
15:42:04 INFO    : Reading slice IG-ST-2 credential...
15:42:04 INFO    : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-2 expires on 2014-08-08 19:10:48 UTC
15:42:04 INFO    : Calling SCS...
15:42:06 INFO    : Multi-AM reservation will include resources from these aggregates:
15:42:06 INFO    : 	<Aggregate rutgers-ig>
15:42:06 INFO    : 	<Aggregate gpo-ig>
15:42:06 INFO    : 	<Aggregate ion>
15:42:06 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
15:42:22 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
15:42:22 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:42:40 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:42:40 INFO    : Stitcher doing createsliver at <Aggregate ion>...
15:43:25 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
15:43:25 INFO    : Pausing 30 seconds to let circuit become ready...
15:44:02 INFO    : Pausing 30 seconds to let circuit become ready...
15:44:39 INFO    : DCN circuit 111341 is ready at <Aggregate ion>
15:44:39 INFO    : DCN circuit 111331 is ready at <Aggregate ion>
15:44:46 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-2-for-lnevers-cred.xml
15:44:46 INFO    : ... Allocation at <Aggregate ion> complete.
15:44:46 INFO    : All aggregates are complete.
15:44:46 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-02 19:42:44 UTC at <Aggregate ion>. Second expiration is 2014-08-08T19:10:48 UTC. 
15:44:46 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-2-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-2 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 32058  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.rutgers.edu

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....

ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 38458  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

$ ping 10.10.4.2 -c 60 -q 
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59062ms
rtt min/avg/max/mdev = 15.059/15.379/31.411/2.090 ms

$ ping 192.168.4.2 -c 60 -q
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59044ms
rtt min/avg/max/mdev = 15.050/15.373/31.460/2.095 ms

AL2S Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o --excludehop urn:publicid:IDN+instageni.rutgers.edu+interface+procurve2:1.19.ion
15:57:44 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
15:57:45 INFO    : Reading slice IG-ST-2 credential...
15:57:45 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2014-12-08 20:57:38 UTC
15:57:45 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
15:57:45 INFO    : Calling SCS...
15:57:48 INFO    : Multi-AM reservation will include resources from these aggregates:
15:57:48 INFO    : 	<Aggregate rutgers-ig>
15:57:48 INFO    : 	<Aggregate gpo-ig>
15:57:48 INFO    : 	<Aggregate oess>
15:57:48 INFO    : 	<Aggregate ion>
15:57:48 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
15:58:06 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
15:58:06 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:58:25 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:58:25 INFO    : Stitcher doing createsliver at <Aggregate oess>...
15:58:29 ERROR   :  {'output': 'Exception: requested VLAN unavailable: sdn-sw.newy32aoa.net.internet2.edu,e15/6 VLAN=3744', 'code': {'geni_code': 24}}
15:58:29 WARNING : Stitching failed but will retry: Circuit reservation failed at <Aggregate oess>. Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: sdn-sw.newy32aoa.net.internet2.edu,e15/6 VLAN=3744.))
15:58:29 INFO    : Deleting existing reservations...
15:58:29 INFO    : Doing deletesliver at <Aggregate rutgers-ig>...
15:59:36 INFO    : Deleted reservation at <Aggregate rutgers-ig>.
15:59:36 INFO    : Doing deletesliver at <Aggregate gpo-ig>...
16:00:21 INFO    : Deleted reservation at <Aggregate gpo-ig>.
16:00:21 INFO    : Calling SCS for the 2nd time...
16:00:23 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


16:00:53 INFO    : Multi-AM reservation will include resources from these aggregates:
16:00:53 INFO    : 	<Aggregate rutgers-ig>
16:00:53 INFO    : 	<Aggregate gpo-ig>
16:00:53 INFO    : 	<Aggregate oess>
16:00:53 INFO    : 	<Aggregate ion>
16:00:53 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
16:01:10 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
16:01:10 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
16:01:26 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
16:01:27 INFO    : Stitcher doing createsliver at <Aggregate oess>...
16:01:33 INFO    : ... Allocation at <Aggregate oess> complete.
16:01:33 INFO    : Stitcher doing createsliver at <Aggregate ion>...
16:02:18 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
16:02:18 INFO    : Pausing 30 seconds to let circuit become ready...
16:02:56 INFO    : Pausing 30 seconds to let circuit become ready...
16:03:33 INFO    : DCN circuit 141571 is ready at <Aggregate ion>
16:03:33 INFO    : DCN circuit 141561 is ready at <Aggregate ion>
16:03:41 INFO    : ... Allocation at <Aggregate ion> complete.
16:03:41 INFO    : All aggregates are complete.
16:03:41 INFO    : Your resources expire at 2014-12-07T20:50:53 (UTC). 
16:03:41 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-2 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.rutgers.edu

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 31802  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

[lnevers@ig-gpo ~]$ ping 10.10.4.2 -c 60 -q
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59094ms
rtt min/avg/max/mdev = 8.393/8.697/17.535/1.161 ms
[lnevers@ig-gpo ~]$ ping 192.168.4.2 -c 60 -q
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59095ms
rtt min/avg/max/mdev = 8.391/8.725/18.114/1.229 ms
[lnevers@ig-gpo ~]$ 

IG-ST-3 IG-ST-3 New Site 3 node linear topology

ION Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
10:59:36 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
10:59:37 INFO    : Reading slice IG-ST-3 credential...
10:59:37 INFO    : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-3 expires on 2014-08-11 11:58:32 UTC
10:59:37 INFO    : Calling SCS...
10:59:39 INFO    : Multi-AM reservation will include resources from these aggregates:
10:59:39 INFO    : 	<Aggregate rutgers-ig>
10:59:39 INFO    : 	<Aggregate ion>
10:59:39 INFO    : 	<Aggregate gpo-ig>
10:59:39 INFO    : 	<Aggregate utah-pg>
10:59:39 INFO    : 	<Aggregate utah-ig>
10:59:39 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
10:59:55 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
10:59:55 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:00:09 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:00:09 INFO    : Stitcher doing createsliver at <Aggregate utah-pg>...
11:00:59 INFO    : ... Allocation at <Aggregate utah-pg> complete.
11:00:59 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:01:44 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:01:44 INFO    : Pausing 30 seconds to let circuit become ready...
11:02:21 INFO    : Pausing 30 seconds to let circuit become ready...
11:02:59 INFO    : DCN circuit 111821 is ready at <Aggregate ion>
11:02:59 INFO    : DCN circuit 111811 is ready at <Aggregate ion>
11:03:06 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-3-for-lnevers-cred.xml
11:03:06 INFO    : ... Allocation at <Aggregate ion> complete.
11:03:06 INFO    : Stitcher doing createsliver at <Aggregate utah-ig>...
11:03:21 INFO    : ... Allocation at <Aggregate utah-ig> complete.
11:03:21 INFO    : All aggregates are complete.
11:03:21 INFO    : Your resources expire at 4 different times at different AMs. The first expiration is 2014-08-04 20:00:18 UTC at <Aggregate utah-pg> and <Aggregate utah-ig>. Second expiration is 2014-08-05T15:01:03 UTC. 
11:03:21 INFO    : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-3-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the Rutgers host:

$ readyToLogin.py IG-ST-3 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 32314  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.rutgers.edu

Login to the Rutgers host and ping each remote:

#ping GPO IG 
[lnevers@ig-rut ~]$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59070ms
rtt min/avg/max/mdev = 15.046/15.372/30.623/1.989 ms

# Utah IG
[lnevers@ig-rut ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59085ms
rtt min/avg/max/mdev = 87.086/87.416/87.945/0.219 ms

AL2S Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o --excludehop urn:publicid:IDN+instageni.rutgers.edu+interface+procurve2:1.19.ion
15:39:08 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
15:39:08 INFO    : Reading slice IG-ST-3 credential...
15:39:08 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2014-12-17 20:38:53 UTC
15:39:08 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
15:39:08 INFO    : Calling SCS...
15:39:12 INFO    : Multi-AM reservation will include resources from these aggregates:
15:39:12 INFO    : 	<Aggregate oess>
15:39:12 INFO    : 	<Aggregate utah-ig>
15:39:12 INFO    : 	<Aggregate gpo-ig>
15:39:12 INFO    : 	<Aggregate ion>
15:39:12 INFO    : 	<Aggregate rutgers-ig>
15:39:12 INFO    : 	<Aggregate utah-pg>
15:39:12 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:39:30 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:39:30 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
15:39:52 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
15:39:52 INFO    : Stitcher doing createsliver at <Aggregate utah-pg>...
15:41:01 INFO    : ... Allocation at <Aggregate utah-pg> complete.
15:41:01 INFO    : Stitcher doing createsliver at <Aggregate oess>...
15:41:06 ERROR   :  {'output': 'Exception: requested VLAN unavailable: sdn-sw.newy32aoa.net.internet2.edu,eth15/6 VLAN=3744', 'code': {'geni_code': 24}}
15:41:06 WARNING : Stitching failed but will retry: Circuit reservation failed at <Aggregate oess>. Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: sdn-sw.newy32aoa.net.internet2.edu,eth15/6 VLAN=3744.))
15:41:06 INFO    : Deleting existing reservations...
15:41:06 INFO    : Doing deletesliver at <Aggregate gpo-ig>...
15:41:30 INFO    : Deleted reservation at <Aggregate gpo-ig>.
15:41:30 INFO    : Doing deletesliver at <Aggregate rutgers-ig>...
15:41:33 INFO    : Deleted reservation at <Aggregate rutgers-ig>.
15:41:33 INFO    : Doing deletesliver at <Aggregate utah-pg>...
15:42:04 INFO    : Deleted reservation at <Aggregate utah-pg>.
15:42:04 INFO    : Calling SCS for the 2nd time...
15:42:06 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


15:42:36 INFO    : Multi-AM reservation will include resources from these aggregates:
15:42:36 INFO    : 	<Aggregate oess>
15:42:36 INFO    : 	<Aggregate utah-ig>
15:42:36 INFO    : 	<Aggregate gpo-ig>
15:42:36 INFO    : 	<Aggregate ion>
15:42:36 INFO    : 	<Aggregate rutgers-ig>
15:42:36 INFO    : 	<Aggregate utah-pg>
15:42:36 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:42:54 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:42:54 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
15:43:15 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
15:43:15 INFO    : Stitcher doing createsliver at <Aggregate utah-pg>...
15:44:22 INFO    : ... Allocation at <Aggregate utah-pg> complete.
15:44:22 INFO    : Stitcher doing createsliver at <Aggregate oess>...
15:44:27 INFO    : ... Allocation at <Aggregate oess> complete.
15:44:27 INFO    : Stitcher doing createsliver at <Aggregate utah-ig>...
15:44:44 INFO    : ... Allocation at <Aggregate utah-ig> complete.
15:44:44 INFO    : Stitcher doing createsliver at <Aggregate ion>...
15:45:29 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
15:45:29 INFO    : Pausing 30 seconds to let circuit become ready...
15:46:07 INFO    : Pausing 30 seconds to let circuit become ready...
15:46:44 INFO    : DCN circuit 144301 is ready at <Aggregate ion>
15:46:44 INFO    : DCN circuit 144281 is ready at <Aggregate ion>
15:46:52 INFO    : ... Allocation at <Aggregate ion> complete.
15:46:52 INFO    : All aggregates are complete.
15:46:52 INFO    : Your resources expire at 2014-12-15T20:32:36 (UTC). 
15:46:52 INFO    : Saved combined reservation RSpec at 6 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 6 Aggregates (including 3 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the Rutgers host:

$ readyToLogin.py IG-ST-3 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.rutgers.edu

Login to the Rutgers host and ping each remote:

#ping GPO IG
[lnevers@ig-rut ~]$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59095ms
rtt min/avg/max/mdev = 8.344/8.646/17.217/1.121 ms

# Utah IG
[lnevers@ig-rut ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59092ms
rtt min/avg/max/mdev = 90.385/92.024/181.220/11.615 ms

IG-ST-4 New Site to GPO EG interoperability

ION Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

$ stitcher createsliver IG-ST-4-cap ./IG-ST-4.rspec
15:19:55 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
15:19:55 INFO    : Reading slice IG-ST-4-cap credential...
15:19:56 INFO    : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-4-cap expires on 2014-08-11 19:19:12 UTC
15:19:56 INFO    : Calling SCS...
15:19:57 INFO    : Multi-AM reservation will include resources from these aggregates:
15:19:57 INFO    : 	<Aggregate rutgers-ig>
15:19:57 INFO    : 	<Aggregate gpo-eg>
15:19:57 INFO    : 	<Aggregate ion>
15:19:57 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
15:20:12 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
15:20:12 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
15:20:21 ERROR   :  {'output': 'Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/03ffb90c-2035-43f3-b7ae-1d162f1d1574#/8e66da0f-f7a3-4113-bda9-87fa95396ded.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}}
15:20:21 INFO    : Got an error reserving resources in IG-ST-4-cap at <Aggregate gpo-eg>
15:20:22 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-4-cap at gpo-eg (got result 'False'). (no reason given)
15:20:22 INFO    : Will put <Aggregate gpo-eg> back in the pool to allocate. Got: VLAN was unavailable. Retry <Aggregate gpo-eg> 2nd time with new suggested VLANs
15:20:22 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


15:20:52 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
15:21:04 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
15:21:04 INFO    : Stitcher doing createsliver at <Aggregate ion>...
15:21:49 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
15:21:49 INFO    : Pausing 30 seconds to let circuit become ready...
15:22:26 INFO    : Pausing 30 seconds to let circuit become ready...
15:23:03 INFO    : DCN circuit 112001 is ready at <Aggregate ion>
15:23:10 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-4-cap-for-lnevers-cred.xml
15:23:10 INFO    : ... Allocation at <Aggregate ion> complete.
15:23:10 INFO    : All aggregates are complete.
15:23:10 WARNING : Did not find stitching hop 1's link in template manifest RSpec for path link-eggpo-ig
15:23:10 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-05 19:21:09 UTC at <Aggregate ion>. Second expiration is 2014-08-11T19:19:12 UTC. 
15:23:10 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-4-cap-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-4-cap at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-4 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 32058  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu

$ readyToLogin.py IG-ST-4 -a eg-sm
  ....
eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.10

Measurements

Iperf ExoGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2014-08-04

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec    675 MBytes  94.3 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec    145 MBytes  20.2 Mbits/sec
[  7]  0.0-60.0 sec    150 MBytes  20.9 Mbits/sec
[  4]  0.0-60.1 sec    139 MBytes  19.4 Mbits/sec
[  3]  0.0-60.1 sec    143 MBytes  19.9 Mbits/sec
[  6]  0.0-60.1 sec    141 MBytes  19.7 Mbits/sec
[SUM]  0.0-60.1 sec    717 MBytes    100 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec  80.9 MBytes  11.3 Mbits/sec
[  9]  0.0-60.0 sec  67.7 MBytes  9.46 Mbits/sec
[  8]  0.0-60.0 sec  74.9 MBytes  10.5 Mbits/sec
[  3]  0.0-60.1 sec  69.6 MBytes  9.72 Mbits/sec
[  7]  0.0-60.1 sec  66.7 MBytes  9.31 Mbits/sec
[ 11]  0.0-60.1 sec  74.2 MBytes  10.4 Mbits/sec
[ 10]  0.0-60.2 sec  70.6 MBytes  9.84 Mbits/sec
[ 12]  0.0-60.2 sec  70.3 MBytes  9.80 Mbits/sec
[  4]  0.0-60.2 sec  72.3 MBytes  10.1 Mbits/sec
[  5]  0.0-60.3 sec  72.7 MBytes  10.1 Mbits/sec
[SUM]  0.0-60.3 sec    720 MBytes    100 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec    719 MBytes    101 Mbits/sec
[  3] Sent 512822 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec    676 MBytes  94.6 Mbits/sec  0.067 ms 30506/512821 (5.9%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI Rutgers VM

60 packets transmitted, 60 received, 0% packet loss, time 59104ms
rtt min/avg/max/mdev = 15.118/15.835/17.994/0.335 ms

Iperf InstaGENI Rutgers VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-04

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   717 MBytes   100 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   144 MBytes  20.1 Mbits/sec
[  4]  0.0-60.0 sec   102 MBytes  14.2 Mbits/sec
[  5]  0.0-60.1 sec   165 MBytes  23.1 Mbits/sec
[  7]  0.0-60.1 sec   152 MBytes  21.2 Mbits/sec
[  6]  0.0-60.1 sec   145 MBytes  20.2 Mbits/sec
[SUM]  0.0-60.1 sec   707 MBytes  98.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec  76.9 MBytes  10.7 Mbits/sec
[  3]  0.0-60.1 sec  56.1 MBytes  7.84 Mbits/sec
[ 12]  0.0-60.0 sec  86.2 MBytes  12.0 Mbits/sec
[  6]  0.0-60.1 sec  71.2 MBytes  9.95 Mbits/sec
[ 10]  0.0-60.1 sec  82.0 MBytes  11.4 Mbits/sec
[  7]  0.0-60.2 sec  59.2 MBytes  8.26 Mbits/sec
[  9]  0.0-60.2 sec  57.4 MBytes  8.00 Mbits/sec
[ 11]  0.0-60.2 sec  62.8 MBytes  8.75 Mbits/sec
[  8]  0.0-60.3 sec  77.6 MBytes  10.8 Mbits/sec
[  4]  0.0-60.4 sec  83.2 MBytes  11.6 Mbits/sec
[SUM]  0.0-60.4 sec   713 MBytes  99.0 Mbits/sec

Iperf InstaGENI Rutgers VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512772 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   693 MBytes  96.9 Mbits/sec   0.082 ms 18378/512771 (3.6%)
[  3]  0.0-60.0 sec  69 datagrams received out-of-order

Ping from InstaGENI Rutgers VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59112ms
rtt min/avg/max/mdev = 15.493/15.820/16.102/0.107 ms

AL2S Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

$ stitcher createsliver IG-ST-4 IG-ST-4.rspec  --excludehop urn:publicid:IDN+instageni.rutgers.edu+interface+procurve2:1.19.ion
11:52:30 INFO    : Configured logging from file /home/lnevers/gcf-2.8-pre1/src/gcf/stitcher_logging.conf
11:52:30 INFO    : Reading slice IG-ST-4 credential...
11:52:30 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2015-02-01 00:00:00 UTC
11:52:30 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
11:52:30 INFO    : Calling SCS...
11:52:32 INFO    : Multi-AM reservation will include resources from these aggregates:
11:52:32 INFO    : 	<Aggregate rutgers-ig>
11:52:32 INFO    : 	<Aggregate oess>
11:52:32 INFO    : 	<Aggregate gpo-eg>
11:52:32 INFO    : 	<Aggregate ion>
11:52:32 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
11:52:49 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
11:52:49 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
11:52:59 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
11:52:59 INFO    : Stitcher doing createsliver at <Aggregate oess>...
11:53:03 INFO    : ... Allocation at <Aggregate oess> complete.
11:53:03 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:53:48 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:53:48 INFO    : Pausing 30 seconds to let circuit become ready...
11:54:26 INFO    : DCN circuit 148081 is ready at <Aggregate ion>
11:54:33 INFO    : ... Allocation at <Aggregate ion> complete.
11:54:33 INFO    : All aggregates are complete.
11:54:33 INFO    : Your resources expire at 2015-01-28T16:42:32 (UTC). 
11:54:33 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-4 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.rutgers.edu

$ readyToLogin.py IG-ST-4 -a gpo-eg
  ....
eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.14

Measurements

Iperf ExoGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2015-01-14

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   710 MBytes  99.2 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec   140 MBytes  19.5 Mbits/sec
[  5]  0.0-60.1 sec   141 MBytes  19.7 Mbits/sec
[  6]  0.0-60.1 sec   140 MBytes  19.6 Mbits/sec
[  4]  0.0-60.1 sec   141 MBytes  19.7 Mbits/sec
[  3]  0.0-60.1 sec   140 MBytes  19.5 Mbits/sec
[SUM]  0.0-60.1 sec   702 MBytes  98.0 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-60.1 sec  68.1 MBytes  9.51 Mbits/sec
[  6]  0.0-60.1 sec  71.0 MBytes  9.90 Mbits/sec
[  5]  0.0-60.2 sec  63.6 MBytes  8.87 Mbits/sec
[  3]  0.0-60.2 sec  71.1 MBytes  9.91 Mbits/sec
[  9]  0.0-60.2 sec  70.1 MBytes  9.77 Mbits/sec
[ 11]  0.0-60.3 sec  74.2 MBytes  10.3 Mbits/sec
[  7]  0.0-60.3 sec  71.2 MBytes  9.91 Mbits/sec
[  8]  0.0-60.3 sec  78.4 MBytes  10.9 Mbits/sec
[  4]  0.0-60.3 sec  74.6 MBytes  10.4 Mbits/sec
[ 12]  0.0-60.4 sec  64.1 MBytes  8.91 Mbits/sec
[SUM]  0.0-60.4 sec   707 MBytes  98.2 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512802 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   671 MBytes  93.6 Mbits/sec   0.086 ms 34509/512801 (6.7%)
[  3]  0.0-60.1 sec  5 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI Rutgers VM

60 packets transmitted, 60 received, 0% packet loss, time 59084ms
rtt min/avg/max/mdev = 9.095/9.294/9.936/0.183 ms

Iperf InstaGENI Rutgers VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-01-15

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   718 MBytes   100 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec   164 MBytes  22.9 Mbits/sec
[  3]  0.0-60.0 sec   193 MBytes  26.9 Mbits/sec
[  6]  0.0-60.2 sec   137 MBytes  19.0 Mbits/sec
[  4]  0.0-60.2 sec  78.4 MBytes  10.9 Mbits/sec
[  7]  0.0-60.2 sec   140 MBytes  19.6 Mbits/sec
[SUM]  0.0-60.2 sec   712 MBytes  99.3 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec  74.4 MBytes  10.4 Mbits/sec
[  9]  0.0-60.1 sec  89.0 MBytes  12.4 Mbits/sec
[  8]  0.0-60.1 sec  77.0 MBytes  10.7 Mbits/sec
[ 11]  0.0-60.2 sec  65.4 MBytes  9.12 Mbits/sec
[  5]  0.0-60.2 sec  57.5 MBytes  8.01 Mbits/sec
[  3]  0.0-60.2 sec  78.5 MBytes  10.9 Mbits/sec
[  4]  0.0-60.3 sec  74.8 MBytes  10.4 Mbits/sec
[  6]  0.0-60.4 sec  65.8 MBytes  9.13 Mbits/sec
[ 10]  0.0-60.4 sec  65.9 MBytes  9.15 Mbits/sec
[ 12]  0.0-60.5 sec  67.4 MBytes  9.35 Mbits/sec
[SUM]  0.0-60.5 sec   716 MBytes  99.3 Mbits/sec

Iperf InstaGENI Rutgers VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   100 Mbits/sec
[  3] Sent 512745 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   693 MBytes  96.9 Mbits/sec   0.107 ms 18576/512744 (3.6%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI Rutgers VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59087ms
rtt min/avg/max/mdev = 9.075/9.294/9.693/0.126 ms

IG-ST-5 Site Information

ION Tests

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the Rutgers Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Added site to the list of GENI Network Stitching Sites.

AL2S Tests

  1. Verified that stitching VLANs and Device URN information exists in the Rutgers Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Already part of the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

ION Tests

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o
08:55:40 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
08:55:40 INFO    : Reading slice IG-ST-6 credential...
08:55:41 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours on 2014-08-05 13:46:53 UTC
08:55:41 INFO    : Calling SCS...
08:55:42 INFO    : Multi-AM reservation will include resources from these aggregates:
08:55:42 INFO    : 	<Aggregate rutgers-ig>
08:55:42 INFO    : 	<Aggregate gpo-ig>
08:55:42 INFO    : 	<Aggregate ion>
08:55:42 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
08:55:42 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:56:00 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
08:56:00 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
08:56:00 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:56:13 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
08:56:13 INFO    : Stitcher doing createsliver at <Aggregate ion>...
08:56:14 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:56:58 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
08:56:58 INFO    : Pausing 30 seconds to let circuit become ready...
08:57:28 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:57:35 INFO    : DCN circuit 112101 is ready at <Aggregate ion>
08:57:36 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:57:43 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-6-for-lnevers-cred.xml
08:57:43 WARNING : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires in <= 3 hours
08:57:48 INFO    : ... Allocation at <Aggregate ion> complete.
08:57:48 INFO    : All aggregates are complete.
08:57:48 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-05 13:46:53 UTC at <Aggregate rutgers-ig> and <Aggregate gpo-ig>. Second expiration is 2014-08-06T12:56:18 UTC. 
08:57:48 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-6-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-6 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-6 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 32314  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu

$ readyToLogin.py IG-ST-6 -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 35130  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-05

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.4 sec   142 MBytes  19.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-59.6 sec  23.9 MBytes  3.36 Mbits/sec
[  7]  0.0-60.3 sec  28.9 MBytes  4.02 Mbits/sec
[  5]  0.0-60.5 sec  37.6 MBytes  5.22 Mbits/sec
[  6]  0.0-60.6 sec  24.6 MBytes  3.41 Mbits/sec
[  4]  0.0-60.7 sec  28.4 MBytes  3.92 Mbits/sec
[SUM]  0.0-60.7 sec   143 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.5 sec  14.2 MBytes  2.01 Mbits/sec
[  3]  0.0-59.8 sec  12.2 MBytes  1.72 Mbits/sec
[ 12]  0.0-60.0 sec  10.9 MBytes  1.52 Mbits/sec
[  5]  0.0-60.2 sec  19.0 MBytes  2.65 Mbits/sec
[ 11]  0.0-60.4 sec  19.5 MBytes  2.71 Mbits/sec
[ 10]  0.0-60.6 sec  19.0 MBytes  2.63 Mbits/sec
[  9]  0.0-60.8 sec  13.8 MBytes  1.90 Mbits/sec
[  8]  0.0-60.8 sec  10.4 MBytes  1.43 Mbits/sec
[  7]  0.0-60.8 sec  12.2 MBytes  1.69 Mbits/sec
[  6]  0.0-61.1 sec  13.9 MBytes  1.91 Mbits/sec
[SUM]  0.0-61.1 sec   145 MBytes  19.9 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512785 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  17.103 ms 413628/512780 (81%)
[  3]  0.0-60.2 sec  53 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI Rutgers VM

60 packets transmitted, 60 received, 0% packet loss, time 59113ms
rtt min/avg/max/mdev = 15.607/19.550/129.258/18.010 ms

Iperf InstaGENI Rutgers VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-08-05

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.3 sec   142 MBytes  19.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec  24.4 MBytes  3.40 Mbits/sec
[  3]  0.0-60.2 sec  30.4 MBytes  4.23 Mbits/sec
[  4]  0.0-60.5 sec  28.0 MBytes  3.88 Mbits/sec
[  6]  0.0-60.8 sec  36.2 MBytes  5.00 Mbits/sec
[  7]  0.0-60.8 sec  25.0 MBytes  3.45 Mbits/sec
[SUM]  0.0-60.8 sec   144 MBytes  19.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.3 sec  19.2 MBytes  2.72 Mbits/sec
[  6]  0.0-59.3 sec  17.6 MBytes  2.49 Mbits/sec
[  5]  0.0-59.4 sec  15.6 MBytes  2.21 Mbits/sec
[  8]  0.0-59.8 sec  17.1 MBytes  2.40 Mbits/sec
[ 10]  0.0-59.9 sec  11.9 MBytes  1.66 Mbits/sec
[ 11]  0.0-60.8 sec  11.9 MBytes  1.64 Mbits/sec
[  3]  0.0-60.8 sec  13.0 MBytes  1.79 Mbits/sec
[  9]  0.0-60.9 sec  12.2 MBytes  1.69 Mbits/sec
[ 12]  0.0-61.2 sec  14.6 MBytes  2.00 Mbits/sec
[  7]  0.0-61.4 sec  14.4 MBytes  1.97 Mbits/sec
[SUM]  0.0-61.4 sec   148 MBytes  20.2 Mbits/sec

Iperf InstaGENI Rutgers VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512775 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec   8.113 ms 413685/512774 (81%)
[  3]  0.0-60.2 sec  70 datagrams received out-of-order

Ping from InstaGENI Rutgers VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59110ms
rtt min/avg/max/mdev = 15.515/19.903/167.644/21.451 ms

AL2S Tests

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

08:44:45 INFO    : Reading slice IG-ST-6a credential...
08:44:45 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6a expires on 2015-01-16 14:12:24 UTC
08:44:45 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
08:44:45 INFO    : Calling SCS...
08:44:46 INFO    : Multi-AM reservation will include resources from these aggregates:
08:44:46 INFO    : 	<Aggregate rutgers-ig>
08:44:46 INFO    : 	<Aggregate gpo-ig>
08:44:46 INFO    : 	<Aggregate oess>
08:44:46 INFO    : 	<Aggregate ion>
08:44:46 INFO    : Stitcher doing createsliver at <Aggregate rutgers-ig>...
08:45:04 INFO    : ... Allocation at <Aggregate rutgers-ig> complete.
08:45:04 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
08:45:23 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
08:45:23 INFO    : Stitcher doing createsliver at <Aggregate oess>...
08:45:27 INFO    : ... Allocation at <Aggregate oess> complete.
08:45:27 INFO    : Stitcher doing createsliver at <Aggregate ion>...
08:46:13 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
08:46:13 INFO    : Pausing 30 seconds to let circuit become ready...
08:46:50 INFO    : DCN circuit 147901 is ready at <Aggregate ion>
08:46:59 INFO    : ... Allocation at <Aggregate ion> complete.
08:46:59 INFO    : All aggregates are complete.
08:46:59 INFO    : Your resources expire at 2015-01-16T13:34:46 (UTC). 
08:46:59 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-6a-manifest-rspec-multiam-combined.xml'

Determined login information at each Rutgers and GPO aggregate:

$ readyToLogin.py IG-ST-6 -a rutgers-ig
  ....
ig-rut's geni_status is: ready 
User lnevers logs in to ig-rut using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu

$ readyToLogin.py IG-ST-6 -a gpo-ig
  ....
ig-gpo's geni_status is: ready  
User lnevers logs in to ig-gpo using:
	       ssh -p 32570  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-01-14

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   143 MBytes  19.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  37.0 MBytes  5.17 Mbits/sec
[  3]  0.0-60.1 sec  24.4 MBytes  3.40 Mbits/sec
[  5]  0.0-60.1 sec  20.6 MBytes  2.88 Mbits/sec
[  7]  0.0-60.4 sec  31.1 MBytes  4.32 Mbits/sec
[  6]  0.0-60.8 sec  30.1 MBytes  4.16 Mbits/sec
[SUM]  0.0-60.8 sec   143 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.7 sec  17.1 MBytes  2.41 Mbits/sec
[  6]  0.0-60.0 sec  10.6 MBytes  1.49 Mbits/sec
[ 11]  0.0-60.0 sec  24.9 MBytes  3.48 Mbits/sec
[  3]  0.0-60.4 sec  11.6 MBytes  1.61 Mbits/sec
[ 12]  0.0-60.5 sec  12.4 MBytes  1.72 Mbits/sec
[  7]  0.0-60.7 sec  15.4 MBytes  2.13 Mbits/sec
[  8]  0.0-60.9 sec  12.2 MBytes  1.69 Mbits/sec
[  9]  0.0-60.9 sec  14.0 MBytes  1.93 Mbits/sec
[  5]  0.0-60.9 sec  13.8 MBytes  1.89 Mbits/sec
[ 10]  0.0-61.8 sec  13.2 MBytes  1.80 Mbits/sec
[SUM]  0.0-61.8 sec   145 MBytes  19.7 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512803 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.3 Mbits/sec  18.706 ms 413720/512798 (81%)
[  3]  0.0-60.2 sec  71 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI Rutgers VM

60 packets transmitted, 60 received, 0% packet loss, time 59090ms
rtt min/avg/max/mdev = 8.858/12.545/92.400/14.358 ms

Iperf InstaGENI Rutgers VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-01-14

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.8 sec   141 MBytes  19.5 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  27.8 MBytes  3.88 Mbits/sec
[  5]  0.0-60.1 sec  19.0 MBytes  2.65 Mbits/sec
[  3]  0.0-60.5 sec  34.2 MBytes  4.75 Mbits/sec
[  7]  0.0-60.7 sec  30.0 MBytes  4.14 Mbits/sec
[  6]  0.0-61.0 sec  32.8 MBytes  4.51 Mbits/sec
[SUM]  0.0-61.0 sec   144 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.8 sec  11.8 MBytes  1.65 Mbits/sec
[  6]  0.0-60.0 sec  18.1 MBytes  2.53 Mbits/sec
[  9]  0.0-60.1 sec  9.38 MBytes  1.31 Mbits/sec
[  7]  0.0-60.4 sec  15.0 MBytes  2.08 Mbits/sec
[  3]  0.0-60.4 sec  14.0 MBytes  1.94 Mbits/sec
[ 10]  0.0-60.5 sec  13.2 MBytes  1.84 Mbits/sec
[ 12]  0.0-60.9 sec  23.2 MBytes  3.20 Mbits/sec
[  5]  0.0-61.0 sec  12.0 MBytes  1.65 Mbits/sec
[  8]  0.0-61.1 sec  15.9 MBytes  2.18 Mbits/sec
[ 11]  0.0-61.4 sec  12.8 MBytes  1.74 Mbits/sec
[SUM]  0.0-61.4 sec   145 MBytes  19.9 Mbits/sec

Iperf InstaGENI Rutgers VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-58.9 sec  1.18 GBytes   172 Mbits/sec
[  3] Sent 861983 datagrams
[  3] Server Report:
[  3]  0.0-60.4 sec   139 MBytes  19.4 Mbits/sec   6.751 ms 762430/861921 (88%)
[  3]  0.0-60.4 sec  60 datagrams received out-of-order

Ping from InstaGENI Rutgers VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59081ms
rtt min/avg/max/mdev = 8.975/12.614/91.969/14.991 ms
Last modified 9 years ago Last modified on 01/14/15 12:12:23