wiki:GIR3.2_IMF

Version 6 (modified by lnevers@bbn.com, 7 years ago) (diff)

--

Integrated Management Framework Evaluation

This evaluation reviews the documentation and code used for the GEC10 Demo of the Integrated Measurement Framework demonstration for the milestone:

IMF: S3.d Documentation and Code Release (Completed late 05/13/11)

According to the IMF Post-GEC11 status, the IMF code is available as attachments the status page. The following perfSONAR components are available:

Evaluation Timeline: October 7, 2011

Integrated Management Framework Findings

Outstanding question:The ERM side is not available, is this effort is on hold?

Integrated Management Framework How-to

Downloaded each of the 5 software packages available as attachments in the Code Snapshot section of the IMF GEC11 QSR.

Measurement Handler How-to

Unpacked and built the Measurement Handler package:

  $ tar xvzf mh.tar.gz
  $ cd mh
  $ perl Makefile.PL 

The perl command fails due to missing pre-requisite perl Modules: Date::Manip, Net::Telnet, and Thread::Queue::Any. Once installed was able to generate the makefile and proceed to the next step:

}}}

Realtime Service How-to

Unpacked and built the Realtime Service package:

  $ tar xvzf perfsonar_imf_realtime.tar.gz 
  $ cd perfSONAR_PS-IMF-RealTime
  $ sudo make install
  sed -i "s|/opt/perfsonar_ps/imfrealtime|/opt/perfsonar_ps/imfrealtime|g" ./etc/daemon.conf
  sed -i "s|/opt/perfsonar_ps/imfrealtime|/opt/perfsonar_ps/imfrealtime|g" ./etc/daemon_logger.conf
  for i in `ls ./scripts`; do sed -i "s|/opt/perfsonar_ps/imfrealtime|/opt/perfsonar_ps/imfrealtime|g" ./scripts/${i}; done
  mkdir -p /opt/perfsonar_ps/imfrealtime
  tar ch --exclude=etc/* --exclude=*spec --exclude=MANIFEST --exclude=Makefile -T MANIFEST | tar x -C /opt/perfsonar_ps/imfrealtime
  tar: doc/README: Cannot stat: No such file or directory
  tar: Exiting with failure status due to previous errors
  for i in `cat MANIFEST | grep ^etc`; do  mkdir -p `dirname /opt/perfsonar_ps/imfrealtime/${i}`; if [ -e /opt/perfsonar_ps/imfrealtime/${i} ]; then   install -m 640 -c ${i} /opt/perfsonar_ps/imfrealtime/${i}.new; else install -m 640 -c ${i} /opt/perfsonar_ps/imfrealtime/${i}; fi; done

PubSub How-to

Unpacked and built the PubSub package:

  $ tar xvzf PubSub_for_PerfSONAR.tar.gz



Email us with any questions and feedback on this page!