wiki:GIR3.2_IMF

Version 7 (modified by lnevers@bbn.com, 8 years ago) (diff)

--

Integrated Management Framework Evaluation

This evaluation reviews the documentation and code used for the GEC10 Demo of the Integrated Measurement Framework demonstration for the milestone:

IMF: S3.d Documentation and Code Release (Completed late 05/13/11)

According to the IMF Post-GEC11 status, the IMF code is available as attachments the status page. The following perfSONAR components are available:

Evaluation Timeline: October 7, 2011

Integrated Management Framework Findings

Outstanding question:The ERM side is not available, is this effort is on hold?

Integrated Management Framework How-to

Downloaded each of the 5 software packages available as attachments in the Code Snapshot section of the IMF GEC11 QSR.

Measurement Handler How-to

Unpacked and built the Measurement Handler package:

  $ tar xvzf mh.tar.gz
  $ cd mh
  $ perl Makefile.PL 

The perl command fails due to missing pre-requisite perl Modules: Date::Manip, Net::Telnet, and Thread::Queue::Any. Once installed was able to generate the makefile and proceed to the next step:

$ make
make: *** No targets specified and no makefile found.  Stop.
lnevers@sendaria:~/IMF/mh$ perl Makefile.PL 
Argument "6.55_02" isn't numeric in numeric ge (>=) at Makefile.PL line 5.
Checking if your kit is complete...
Looks good
Writing Makefile for mh
$ make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.t ....... 1/1 # Testing tl1 1.3.1, Perl 5.010001, /usr/bin/perl
t/00-load.t ....... ok   
t/boilerplate.t ... ok   
t/manifest.t ...... skipped: Author tests not required for installation
t/pod-coverage.t .. skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
t/pod.t ........... skipped: Test::Pod 1.22 required for testing POD
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1, 3
Files=5, Tests=4,  1 wallclock secs ( 0.03 usr  0.01 sys +  0.23 cusr  0.04 csys =  0.31 CPU)
Result: PASS
$ sudo make install
Installing /usr/local/share/perl/5.10.1/tl1.pm
Installing /usr/local/share/perl/5.10.1/mh/pol_tl1.pm
Installing /usr/local/share/perl/5.10.1/mh/infinera_tl1.pm
Installing /usr/local/man/man3/tl1.3pm
Installing /usr/local/man/man3/mh::pol_tl1.3pm
Installing /usr/local/man/man3/mh::infinera_tl1.3pm
Appending installation info to /usr/local/lib/perl/5.10.1/perllocal.pod

Realtime Service How-to

Unpacked and built the Realtime Service package:

  $ tar xvzf perfsonar_imf_realtime.tar.gz 
  $ cd perfSONAR_PS-IMF-RealTime
  $ sudo make install
  sed -i "s|/opt/perfsonar_ps/imfrealtime|/opt/perfsonar_ps/imfrealtime|g" ./etc/daemon.conf
  sed -i "s|/opt/perfsonar_ps/imfrealtime|/opt/perfsonar_ps/imfrealtime|g" ./etc/daemon_logger.conf
  for i in `ls ./scripts`; do sed -i "s|/opt/perfsonar_ps/imfrealtime|/opt/perfsonar_ps/imfrealtime|g" ./scripts/${i}; done
  mkdir -p /opt/perfsonar_ps/imfrealtime
  tar ch --exclude=etc/* --exclude=*spec --exclude=MANIFEST --exclude=Makefile -T MANIFEST | tar x -C /opt/perfsonar_ps/imfrealtime
  tar: doc/README: Cannot stat: No such file or directory
  tar: Exiting with failure status due to previous errors
  for i in `cat MANIFEST | grep ^etc`; do  mkdir -p `dirname /opt/perfsonar_ps/imfrealtime/${i}`; if [ -e /opt/perfsonar_ps/imfrealtime/${i} ]; then   install -m 640 -c ${i} /opt/perfsonar_ps/imfrealtime/${i}.new; else install -m 640 -c ${i} /opt/perfsonar_ps/imfrealtime/${i}; fi; done

PubSub How-to

Unpacked and built the PubSub package:

  $ tar xvzf PubSub_for_PerfSONAR.tar.gz



Email us with any questions and feedback on this page!