wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-6

Version 13 (modified by lnevers@bbn.com, 11 years ago) (diff)

--

IG-EXP-6: InstaGENI and Meso-scale Multi-site OpenFlow Acceptance Test

This page captures status for the test case IG-EXP-6, which verifies InstaGENI rack interoperability with other meso-scale GENI sites. For overall status see the InstaGENI Acceptance Test Status page.

Last Updates: 2013/01/08

Test Status

This section captures the status for each step in the acceptance test plan.

Step State Date completed Ticket Comments
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Step 18
Step 19
Step 20
Step 21
Step 22
Step 23
Step 24
Step 25
Step 26
Step 27
Step 28
Step 29
Step 30
Step 31
Step 32
Step 33
Step 34
Step 35
Step 36
Step 37
Step 38
Step 39
Step 40
Step 41


State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.


Test Plan Steps

The tests described in this page are executed at Utah and GPO InstaGENI racks, as planned. Three user credentials are used to execute the experiments, lnevers@bbn.com, lnevers1@bbn.com, and lnever2@bbn.com. Additionally the following aggregate manager nicknames are used:

ig-utah=,https://utah.geniracks.net/protogeni/xmlrpc/am/2.0
ig-gpo=,https://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0
pg-utah=,https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0

#OpenFlow Aggregates
ig-of-gpo=,https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1  #GPO  IG
ig-of-utah=,https://foam.utah.geniracks.net:3626/foam/gapi/1       #Utah IG
of-gpo=,https://foam.gpolab.bbn.com:3626/foam/gapi/1               #GPO Site
of-nlr=,https://foam.nlr.net:3626/foam/gapi/1                      
of-i2=,https://foam.net.internet2.edu:3626/foam/gapi/1
of-uen=,https://foamyflow.chpc.utah.edu:3626/foam/gapi/1

Note: The WAPG node at Indiana and the PG Utah node on shared VLAN 1750 are reserved with the same RSpec.

1. As Experimenter1, request ListResources

As user lnevers@bbn.com get a listersources at GPO InstaGENI, Utah InstaGENI, and from FOAM at InstaGENI GPO, GPO FOAM, NLR FOAM, UEN FOAM and Utah InstaGENI:

$ omni.py listresources -a ig-utah -o          # InstaGENI Utah
$ omni.py listresources -a ig-of-utah -V1 -o   # InstaGENI FOAM 
$ omni.py listresources -a of-uen -V1 -o       # FOAM UEN Regional 
$ omni.py listresources -a of-nlr -V1 -o       # FOAM NLR
$ omni.py listresources -a of-i2 -V1 -o        # FOAM Internet2
$ omni.py listresources -a of-gpo -V1 -o       # GPO SITE FOAM
$ omni.py listresources -a ig-of-gpo -V1 -o    # InstaGENI FOAM
$ omni.py listresources -a ig-gpo -o           # InstaGENI GPO 

2. Review ListResources

Output files for all AMs are reviewed to determine resources.

3. Define a request RSpec for a VM at the GPO InstaGENI

Defined an RSpec that requests one VM on shared VLAN 1750 in the GPO Rack, the RSpec generated is [IG-EXP-6-exp1-ig-gpo.rspec]

4. Define a request RSpec for a VM at the Utah InstaGENI

Defined an RSpec that requests one VM on shared VLAN 1750 in the Utah Rack, the RSpec generated is [IG-EXP-6-exp1-ig-utah.rspec] The Utah InstaGENI rack is available via the UEN Regional FOAM, which requires the RSpec [IG-EXP-6-exp1-openflow-uen.rspec].

5. Define request RSpecs for OpenFlow resources from BBN FOAM

Defined an RSpec for the BBN site FOAM to access GENI OpenFlow core resources, the RSpec generated is [IG-EXP-6-exp1-openflow-gpo.rspec]

6. Define request RSpecs for OpenFlow core resources at I2 FOAM

Defined an for the Internet2 FOAM, the RSpec generated is [IG-EXP-6-exp1-openflow-i2.rspec]

7. Define request RSpecs for OpenFlow core resources at NLR FOAM

Defined an RSpec for the NLR FOAM OpenFlow core resources, the RSpec generated is [IG-EXP-6-exp1-openflow-nlr.rspec]

8. Create the first slice

As user lnevers@bbn.com created the first slice:

$ omni.py createslice IG-EXP-6-exp1

9. Create a sliver in the first slice at each AM

Using the RSpecs defined above, created a sliver at each AM. First created sliver at GPO InstaGENI rack:

$ omni.py createsliver IG-EXP-6-exp1 -a ig-gpo IG-EXP-6-exp1-ig-gpo.rspec
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp1-ig-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1
INFO:omni:Got return from CreateSliver for slice IG-EXP-6-exp1 at http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0:
INFO:omni:<!-- Reserved resources for:
	Slice: IG-EXP-6-exp1
	at AM:
	URN: unspecified_AM_URN
	URL: http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0
 -->
INFO:omni:<rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xmlns:sharedvlan="http://www.protogeni.net/resources/rspec/ext/shared-vlan/1" xs:schemaLocation="http://www.geni.net/resources/rspec/3            http://www.geni.net/resources/rspec/3/manifest.xsd            http://www.protogeni.net/resources/rspec/ext/shared-vlan/1            http://www.protogeni.net/resources/rspec/ext/shared-vlan/1/request.xsd" type="manifest">

  <node client_id="gpo-ig" exclusive="false" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+pc1" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+231">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="gpo-ig:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc1:eth1" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+234" mac_address="0221bac354fc">
      <ip address="10.42.13.43" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  <rs:vnode xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1" name="pcvm1-4"/><host name="gpo-ig.IG-EXP-6-exp1.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com"/><services><login authentication="ssh-keys" hostname="pc1.instageni.gpolab.bbn.com" port="31546" username="lnevers"/></services></node>
  <link xmlns:sharedvlan="http://www.protogeni.net/resources/rspec/ext/shared-vlan/1" client_id="openflow-mesoscale-0" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+233">
    <interface_ref client_id="gpo-ig:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc1:eth1" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+234"/>
    <sharedvlan:link_shared_vlan name="mesoscale-openflow"/>
  </link>

</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:

  Options as run:
		aggregate: ['ig-gpo']
		framework: pg

  Args: createsliver IG-EXP-6-exp1 IG-EXP-6-exp1-ig-gpo.rspec
  Result Summary: Got Reserved resources RSpec from instageni-gpolab-bbn-com-protogeniv2 
INFO:omni: ============================================================

Created sliver at GPO Site FOAM:

$ omni.py createsliver IG-EXP-6-exp1 -a of-gpo IG-EXP-6-exp1-openflow-gpo.rspec
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname of-gpo with URL https://foam.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN
WARNING:omni:You asked to use AM API 2, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v1. 
WARNING:omni:Switching to AM API v1. Next time call Omni with '-V1'.
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname of-gpo with URL https://foam.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname of-gpo with URL https://foam.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp1-openflow-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1
INFO:omni:Got return from CreateSliver for slice IG-EXP-6-exp1 at https://foam.gpolab.bbn.com:3626/foam/gapi/1:
INFO:omni:<?xml version="1.0" encoding="UTF-8"?>
INFO:omni:  <!-- Reserved resources for:
	Slice: IG-EXP-6-exp1
	at AM:
	URN: unspecified_AM_URN
	URL: https://foam.gpolab.bbn.com:3626/foam/gapi/1
 -->
INFO:omni:  
<!-- 
AM: https://foam.gpolab.bbn.com:3626/foam/gapi/1
-->

<rspec xmlns="http://www.geni.net/resources/rspec/3"
       xmlns:xs="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3"
       xs:schemaLocation="http://www.geni.net/resources/rspec/3
           http://www.geni.net/resources/rspec/3/manifest.xsd
           http://www.geni.net/resources/rspec/ext/openflow/3
           http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd"
       type="manifest">

  <openflow:sliver description="IG-EXP-6-exp1"
                   email="lnevers@bbn.com">

    <openflow:controller url="tcp:mallorea.gpolab.bbn.com:33017" type="primary" />

    <openflow:group name="poblano-1750-nlr-3716">
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.gpolab.bbn.com+datapath+06:d6:00:12:e2:b8:a5:d0"
			 component_manager_id="urn:publicid:IDN+openflow:foam:foam.gpolab.bbn.com+authority+am">
        <openflow:port num="5"/>   <!-- to NLR 3716 -->
        <openflow:port num="16"/>  <!-- to BBN InstaGENI rack -->
      </openflow:datapath>
    </openflow:group>

    <openflow:match>

      <openflow:use-group name="poblano-1750-nlr-3716" />

      <openflow:packet>
        <openflow:dl_type value="0x800,0x806"/>
        <openflow:nw_dst value="10.42.13.0/24"/>
        <openflow:nw_src value="10.42.13.0/24"/>
      </openflow:packet>

    </openflow:match>
  </openflow:sliver>

</rspec>

INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
  Options as run:
		aggregate: ['of-gpo']
		api_version: 1
		framework: pg

  Args: createsliver IG-EXP-6-exp1 IG-EXP-6-exp1-openflow-gpo.rspec
  Result Summary: Your AMs do not all speak requested API v2. At the URLs you are contacting, all your AMs speak AM API v1. Switching to AM API v1. Next time call Omni with '-V1'.
Got Reserved resources RSpec from foam-gpolab-bbn-com 
INFO:omni: ============================================================

Created sliver at NLR FOAM:

$ omni.py createsliver IG-EXP-6-exp1 -a of-nlr IG-EXP-6-exp1-openflow-nlr.rspec
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname of-nlr with URL https://foam.nlr.net:3626/foam/gapi/1, URN unspecified_AM_URN
WARNING:omni:You asked to use AM API 2, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v1. 
WARNING:omni:Switching to AM API v1. Next time call Omni with '-V1'.
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname of-nlr with URL https://foam.nlr.net:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname of-nlr with URL https://foam.nlr.net:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp1-openflow-nlr.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1
INFO:omni:Got return from CreateSliver for slice IG-EXP-6-exp1 at https://foam.nlr.net:3626/foam/gapi/1:
INFO:omni:<?xml version="1.0" encoding="UTF-8"?>
INFO:omni:  <!-- Reserved resources for:
	Slice: IG-EXP-6-exp1
	at AM:
	URN: unspecified_AM_URN
	URL: https://foam.nlr.net:3626/foam/gapi/1
 -->
INFO:omni:  
<!-- 
This rspec will reserve the OpenFlow resources at NLR
AM: https://foam.nlr.net:3626/foam/gapi/1
-->

<rspec xmlns="http://www.geni.net/resources/rspec/3"
       xmlns:xs="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3"
       xs:schemaLocation="http://www.geni.net/resources/rspec/3
           http://www.geni.net/resources/rspec/3/manifest.xsd
           http://www.geni.net/resources/rspec/ext/openflow/3
           http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd"
       type="manifest">

  <openflow:sliver description="IG-EXP-6-exp1 "
                   email="lnevers@bbn.com">

    <openflow:controller url="tcp:mallorea.gpolab.bbn.com:33017" type="primary" />

    <openflow:group name="nlr-atla-1750-3716">
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+06:d6:00:24:a8:d2:b8:40" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am">
        <openflow:port num="5"/>   <!-- to VLAN 3716 -->
        <openflow:port num="9"/>   <!-- to AMPATH -->
        <openflow:port num="11"/>  <!-- to FIU -->
        <openflow:port num="49"/>  <!-- to RENCI -->
      </openflow:datapath>
    </openflow:group>

    <openflow:group name="nlr-3716">
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:23:47:c8:bc:00" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am" />  <!-- NLR CHIC 3716 -->
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:23:47:ca:bc:40" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am" />  <!-- NLR SUNN 3716 -->
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:24:a8:d2:48:00" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am" />  <!-- NLR SEAT 3716 -->
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:24:a8:d2:b8:40" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am" />  <!-- NLR ATLA 3716 -->
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:26:f1:40:a8:00" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am" />  <!-- NLR DENV 3716 -->
    </openflow:group>

    <openflow:match>
      <openflow:use-group name="nlr-atla-1750-3716" />
      <openflow:use-group name="nlr-3716" />
      <openflow:packet>
	<openflow:dl_type value="0x800,0x806"/>
	<openflow:nw_dst value="10.42.13.0/24"/>
	<openflow:nw_src value="10.42.13.0/24"/>
      </openflow:packet>
    </openflow:match>
  </openflow:sliver>
</rspec>

INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
  Options as run:
		aggregate: ['of-nlr']
		api_version: 1
		framework: pg

  Args: createsliver IG-EXP-6-exp1 IG-EXP-6-exp1-openflow-nlr.rspec
  Result Summary: Your AMs do not all speak requested API v2. At the URLs you are contacting, all your AMs speak AM API v1. Switching to AM API v1. Next time call Omni with '-V1'.
Got Reserved resources RSpec from foam-nlr-net 
INFO:omni: ============================================================

Created sliver at Internet2 FOAM:

$ omni.py createsliver IG-EXP-6-exp1 -a of-i2 IG-EXP-6-exp1-openflow-i2.rspec 
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname of-i2 with URL https://foam.net.internet2.edu:3626/foam/gapi/1, URN unspecified_AM_URN
WARNING:omni:You asked to use AM API 2, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v1. 
WARNING:omni:Switching to AM API v1. Next time call Omni with '-V1'.
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname of-i2 with URL https://foam.net.internet2.edu:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname of-i2 with URL https://foam.net.internet2.edu:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp1-openflow-i2.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1
INFO:omni:Got return from CreateSliver for slice IG-EXP-6-exp1 at https://foam.net.internet2.edu:3626/foam/gapi/1:
INFO:omni:<?xml version="1.0" encoding="UTF-8"?>
INFO:omni:  <!-- Reserved resources for:
	Slice: IG-EXP-6-exp1
	at AM:
	URN: unspecified_AM_URN
	URL: https://foam.net.internet2.edu:3626/foam/gapi/1
 -->
INFO:omni:  
<!-- 
This rspec will reserve the OpenFlow resources at Internet2
AM: https://foam.net.internet2.edu:3626/foam/gapi/1
-->
<rspec xmlns="http://www.geni.net/resources/rspec/3"
       xmlns:xs="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3"
       xs:schemaLocation="http://www.geni.net/resources/rspec/3
           http://www.geni.net/resources/rspec/3/manifest.xsd
           http://www.geni.net/resources/rspec/ext/openflow/3
           http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd"
       type="manifest">
  <openflow:sliver description="IG-EXP-6-exp1 "
		   email="lnevers@bbn.com">

 <openflow:controller url="tcp:mallorea.gpolab.bbn.com:33017" type="primary" />

    <openflow:group name="i2-3716">
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:63:1d" 
	component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" />  <!-- I2 NEWY 3716 -->
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:6f:e5" 
	component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" />  <!-- I2 WASH 3716 -->
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:63:6e" 
	component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" />  <!-- I2 ATLA 3716 -->
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:81:42" 
	component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" />  <!-- I2 HOUS 3716 -->
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:63:38" 
	component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" />  <!-- I2 LOSA 3716 -->
    </openflow:group>

   <openflow:group name="I2-LOSA-1750-3716">
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+06:d6:00:12:e2:22:63:38" 
	component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" dpid="06:d6:00:12:e2:22:63:38">
        <openflow:port name="15" num="15"/>
      </openflow:datapath>
    </openflow:group>

    <openflow:group name="UEN-1750">
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+06:d6:00:12:e2:22:63:38" 
	component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" dpid="06:d6:00:12:e2:22:63:38">
        <openflow:port name="12" num="12"/>
      </openflow:datapath>
    </openflow:group>

    <openflow:group name="I2-ATLA-1750-3716">
      <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+06:d6:00:12:e2:22:63:6e" 	
	component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" dpid="06:d6:00:12:e2:22:63:6e">
        <openflow:port name="9" num="9"/>
      </openflow:datapath>
    </openflow:group>

    <openflow:match>

      <openflow:use-group name="i2-3716" />
      <openflow:use-group name="UEN-1750" />
      <openflow:use-group name="I2-LOSA-1750-3716" />
      <openflow:packet>
	<openflow:dl_type value="0x800,0x806"/>
	<openflow:nw_dst value="10.42.13.0/24"/>
	<openflow:nw_src value="10.42.13.0/24"/>
      </openflow:packet>

    </openflow:match>

  </openflow:sliver>

</rspec>

INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:

  Options as run:
		aggregate: ['of-i2']
		api_version: 1
		framework: pg

  Args: createsliver IG-EXP-6-exp1 IG-EXP-6-exp1-openflow-i2.rspec

  Result Summary: Your AMs do not all speak requested API v2. At the URLs you are contacting, all your AMs speak AM API v1. Switching to AM API v1. Next time call Omni with '-V1'.
Got Reserved resources RSpec from foam-net-internet2-edu 
INFO:omni: ============================================================

Created sliver at UEN FOAM:

$ omni.py createsliver IG-EXP-6-exp1 -a of-uen IG-EXP-6-exp1-openflow-uen.rspec
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname of-uen with URL https://foamyflow.chpc.utah.edu:3626/foam/gapi/1, URN unspecified_AM_URN
WARNING:omni:You asked to use AM API 2, but the AM(s) you are contacting do not all speak that version.
WARNING:omni:At the URLs you are contacting, all your AMs speak AM API v1. 
WARNING:omni:Switching to AM API v1. Next time call Omni with '-V1'.
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname of-uen with URL https://foamyflow.chpc.utah.edu:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname of-uen with URL https://foamyflow.chpc.utah.edu:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp1-openflow-uen.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1
INFO:omni:Got return from CreateSliver for slice IG-EXP-6-exp1 at https://foamyflow.chpc.utah.edu:3626/foam/gapi/1:
INFO:omni:<?xml version="1.0" encoding="UTF-8"?>
INFO:omni:  <!-- Reserved resources for:
	Slice: IG-EXP-6-exp1
	at AM:
	URN: unspecified_AM_URN
	URL: https://foamyflow.chpc.utah.edu:3626/foam/gapi/1
 -->
INFO:omni:  
<!-- 
This rspec will reserve the OpenFlow resources at UEN
AM: https://foamyflow.chpc.utah.edu:3626/foam/gapi/1
-->

<rspec xmlns="http://www.geni.net/resources/rspec/3"
       xmlns:xs="http://www.w3.org/2001/XMLSchema-instance"
       xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3"
       xs:schemaLocation="http://www.geni.net/resources/rspec/3
           http://www.geni.net/resources/rspec/3/manifest.xsd
           http://www.geni.net/resources/rspec/ext/openflow/3
           http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd"
       type="manifest">

  <openflow:sliver description="IG-EXP-4-exp1 ">

    <openflow:controller url="tcp:mallorea.gpolab.bbn.com:33017" type="primary" />

    <openflow:group name="uen-1750">
    <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foamyflow.chpc.utah.edu+datapath+06:d6:ac:16:2d:f5:2d:00" 
	component_manager_id="urn:publicid:IDN+openflow:foam:foamyflow.chpc.utah.edu+authority+am" dpid="06:d6:ac:16:2d:f5:2d:00">
        <openflow:port name="A21" num="21"/>
        <openflow:port name="A22" num="22"/>
      </openflow:datapath>
    </openflow:group>

    <openflow:match>
      <openflow:use-group name="uen-1750" />
      <openflow:packet>
	<openflow:dl_type value="0x800,0x806"/>
	<openflow:nw_dst value="10.42.13.0/24"/>
	<openflow:nw_src value="10.42.13.0/24"/>
      </openflow:packet>

    </openflow:match>

  </openflow:sliver>

</rspec>

INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:

  Options as run:
		aggregate: ['of-uen']
		api_version: 1
		framework: pg

  Args: createsliver IG-EXP-6-exp1 IG-EXP-6-exp1-openflow-uen.rspec

  Result Summary: Your AMs do not all speak requested API v2. At the URLs you are contacting, all your AMs speak AM API v1. Switching to AM API v1. Next time call Omni with '-V1'.
Got Reserved resources RSpec from foamyflow-chpc-utah-edu 
INFO:omni: ============================================================

Created sliver at Utah InstaGENI Rack:

$ omni.py createsliver IG-EXP-6-exp1 -a ig-utah IG-EXP-6-exp1-ig-utah.rspec
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-utah with URL http://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp1-ig-utah.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp1
INFO:omni:Got return from CreateSliver for slice IG-EXP-6-exp1 at http://utah.geniracks.net/protogeni/xmlrpc/am/2.0:
INFO:omni:<!-- Reserved resources for:
	Slice: IG-EXP-6-exp1
	at AM:
	URN: unspecified_AM_URN
	URL: http://utah.geniracks.net/protogeni/xmlrpc/am/2.0
 -->
INFO:omni:<rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xmlns:sharedvlan="http://www.protogeni.net/resources/rspec/ext/shared-vlan/1" xs:schemaLocation="http://www.geni.net/resources/rspec/3            http://www.geni.net/resources/rspec/3/manifest.xsd            http://www.protogeni.net/resources/rspec/ext/shared-vlan/1            http://www.protogeni.net/resources/rspec/ext/shared-vlan/1/request.xsd" type="manifest">

  <node client_id="utah-ig" exclusive="false" component_id="urn:publicid:IDN+utah.geniracks.net+node+pc1" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+15856">
    <sliver_type name="emulab-openvz"/>
    <interface client_id="utah-ig:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc1:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+15859" mac_address="0256048d72f5">
      <ip address="10.42.13.33" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  <rs:vnode xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1" name="pcvm1-1"/><host name="utah-ig.IG-EXP-6-exp1.pgeni-gpolab-bbn-com.utah.geniracks.net"/><services><login authentication="ssh-keys" hostname="pc1.utah.geniracks.net" port="31546" username="lnevers"/></services></node>
  <link xmlns:sharedvlan="http://www.protogeni.net/resources/rspec/ext/shared-vlan/1" client_id="openflow-mesoscale-0" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+15858">
    <interface_ref client_id="utah-ig:if0" component_id="urn:publicid:IDN+utah.geniracks.net+interface+pc1:eth1" sliver_id="urn:publicid:IDN+utah.geniracks.net+sliver+15859"/>
    <sharedvlan:link_shared_vlan name="mesoscale-openflow"/>
  </link>
</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
  Options as run:
		aggregate: ['ig-utah']
		framework: pg

  Args: createsliver IG-EXP-6-exp1 IG-EXP-6-exp1-ig-utah.rspec
  Result Summary: Got Reserved resources RSpec from utah-geniracks-net-protogeniv2 
INFO:omni: ============================================================

10. Log in to each of the systems

Determined login information for each hosts at the two InstaGENI aggregates, then logged in to verify IP address assignment. Send traffic to the other system, leave traffic running:

$ readyToLogin.py -a ig-gpo IG-EXP-6-exp1
<...>
gpo-ig's geni_status is: ready (am_status:ready) 
User lnevers logins to gpo-ig using:
	xterm -e ssh -p 31546  -i /home/lnevers/.ssh/id_rsa lnevers@pc1.instageni.gpolab.bbn.com &
$ readyToLogin.py -a ig-utah IG-EXP-6-exp1
<...>
utah-ig's geni_status is: ready (am_status:ready) 
User lnevers logins to utah-ig using:
	xterm -e ssh -p 31546  -i /home/lnevers/.ssh/id_rsa lnevers@pc1.utah.geniracks.net &

XXXX

11. As Experimenter2, define a request RSpec

As lnevers1, create RSpecs for one VM and one physical node at BBN InstaGENI. First get a listersources from BBN InstaGENI, Utah InstaGENI, and from FOAM at I2 and NLR Site:

$ omni.py listresources -a ig-utah -o       # InstaGENI Utah 
$ omni.py listresources -a of-uen -V1 -o    # FOAM UEN Regional   
$ omni.py listresources -a of-nlr -V1 -o    # FOAM NLR
$ omni.py listresources -a of-i2 -V1 -o     # FOAM Internet2 
$ omni.py listresources -a of-gpo -V1 -o    # GPO SITE FOAM
$ omni.py listresources -a ig-gpo -o        # InstaGENI GPO 

12. Define RSpec for Utah and GPO InstaGENI resources

Defined an Rspec for two VMs at Utah InstaGENI, Rspec generated is [IG-EXP-6-exp2-ig-utah.rspec]. Defined an RSpec for 1 Raw PC and one VM at GPo InstaGENI, RSpec generated is [IG-EXP-6-exp2-ig-gpo.rspec].

11. Define RSpecs for BBN FOAM

Defined the RSpec to access GENI OpenFlow core resources via the BBN site FOAM, RSpec generated is [IG-EXP-6-exp2-openflow-gpo.rspec].

14. Define RSpecs for I2 FOAM

Defined the RSpec to access the Internet2 FOAM resources, RSpec generated is [IG-EXP-6-exp2-openflow-i2.rspec].

15. Define request RSpecs for NLR FOAM

Defined the RSpec to access the NLR FOAM resources, RSpec generated is [IG-EXP-6-exp2-openflow-nlr.rspec].

16. Create second slice

As experimenter lnever1@bbn.com created slice:

$ omni.py createslice IG-EXP-6-exp2

17. Create a sliver at each AM

Using the RSpecs defined above, created a sliver at each Aggregate. First created sliver at GPO InstaGENI rack:

$ omni.py createsliver -a ig-gpo IG-EXP-6-exp2 IG-EXP-6-exp2-ig-gpo.rspec -V2 -t GENI 3
INFO:omni:Loading config file /home/lnevers1/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-gpo with URL https://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp2-ig-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2
INFO:omni:Asked https://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0 to reserve resources. Result:
INFO:omni:<?xml version="1.0" ?>
INFO:omni:<!-- Reserved resources for:
	Slice: IG-EXP-6-exp2
	At AM:
	URL: https://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0
 -->
INFO:omni:
<rspec type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:sharedvlan="http://www.protogeni.net/resources/rspec/ext/shared-vlan/1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:schemaLocation="http://www.geni.net/resources/rspec/3            http://www.geni.net/resources/rspec/3/manifest.xsd            http://www.protogeni.net/resources/rspec/ext/shared-vlan/1            http://www.protogeni.net/resources/rspec/ext/shared-vlan/1/request.xsd">  

   <node client_id="GPO-VM" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+pc1" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" exclusive="false" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+236">    
        <sliver_type name="emulab-openvz"/>    
        <interface client_id="GPO-VM:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc1:eth1" mac_address="023fc04f56db" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+239">      
            <ip address="10.42.18.37" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
     <rs:vnode name="pcvm1-5" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="GPO-VM.IG-EXP-6-exp2.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com"/>    <services>      <login authentication="ssh-keys" hostname="pc1.instageni.gpolab.bbn.com" port="31802" username="lnevers1"/>    </services>  </node>  
   <node client_id="GPO-PC" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+pc5" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" exclusive="true" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+235">    
        <sliver_type name="raw-pc"/>    
        <interface client_id="GPO-PC:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc5:eth1" mac_address="02e893bb2b8a" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+240">      
            <ip address="10.42.18.38" netmask="255.255.255.0" type="ipv4"/>      
        </interface>    
     <rs:vnode name="pc5" xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1"/>    <host name="GPO-PC.IG-EXP-6-exp2.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com"/>    <services>      <login authentication="ssh-keys" hostname="pc5.instageni.gpolab.bbn.com" port="22" username="lnevers1"/>    </services>  </node>  
   <link client_id="openflow-mesoscale-link" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+238" xmlns:sharedvlan="http://www.protogeni.net/resources/rspec/ext/shared-vlan/1">    
        <interface_ref client_id="GPO-VM:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc1:eth1" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+239"/>    
        <interface_ref client_id="GPO-PC:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc5:eth1" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+240"/>    
        <sharedvlan:link_shared_vlan name="mesoscale-openflow"/>    
    </link>  
</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:

  Options as run:
		aggregate: ig-gpo
		api_version: 2
		framework: pg
		native: True
		rspectype: ('GENI', '3')

  Args: createsliver IG-EXP-6-exp2 IG-EXP-6-exp2-ig-gpo.rspec

  Result Summary: Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
Reserved resources on https://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0.  
INFO:omni: ============================================================

Created sliver at GPO Site FOAM:

$ omni.py createsliver -a of-gpo IG-EXP-6-exp2 IG-EXP-6-exp2-openflow-gpo.rspec -V1
INFO:omni:Loading config file /home/lnevers1/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname of-gpo with URL https://foam.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname of-gpo with URL https://foam.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp2-openflow-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2
INFO:omni:Asked https://foam.gpolab.bbn.com:3626/foam/gapi/1 to reserve resources. Result:
INFO:omni:<?xml version="1.0" ?>
INFO:omni:<!-- Reserved resources for:
	Slice: IG-EXP-6-exp2
	At AM:
	URL: https://foam.gpolab.bbn.com:3626/foam/gapi/1
 -->
INFO:omni:
<!-- 
AM: https://foam.gpolab.bbn.com:3626/foam/gapi/1
--><rspec type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:schemaLocation="http://www.geni.net/resources/rspec/3            http://www.geni.net/resources/rspec/3/manifest.xsd            http://www.geni.net/resources/rspec/ext/openflow/3            http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd">  

    <openflow:sliver description="IG-EXP-6-exp1" email="lnevers@bbn.com">    

        <openflow:controller type="primary" url="tcp:mallorea.gpolab.bbn.com:33018"/>    

        <openflow:group name="poblano-1750-nlr-3716">      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.gpolab.bbn.com+datapath+06:d6:00:12:e2:b8:a5:d0" component_manager_id="urn:publicid:IDN+openflow:foam:foam.gpolab.bbn.com+authority+am">        
                <openflow:port num="5"/>                   <!-- to NLR 3716 -->        
                <openflow:port num="16"/>                  <!-- to BBN InstaGENI rack -->        
            </openflow:datapath>      
        </openflow:group>    

        <openflow:match>      

            <openflow:use-group name="poblano-1750-nlr-3716"/>      

            <openflow:packet>        
                <openflow:dl_type value="0x800,0x806"/>        
                <openflow:nw_dst value="10.42.18.0/24"/>        
                <openflow:nw_src value="10.42.18.0/24"/>        
            </openflow:packet>      

        </openflow:match>    
    </openflow:sliver>  

</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:

  Options as run:
		aggregate: of-gpo
		framework: pg
		native: True

  Args: createsliver IG-EXP-6-exp2 IG-EXP-6-exp2-openflow-gpo.rspec

  Result Summary: Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
Reserved resources on https://foam.gpolab.bbn.com:3626/foam/gapi/1.  
INFO:omni: ============================================================

Create sliver at Internet2 FOAM:

$ omni.py createsliver -a of-i2 IG-EXP-6-exp2 IG-EXP-6-exp2-openflow-i2.rspec  -V1
INFO:omni:Loading config file /home/lnevers1/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname of-i2 with URL https://foam.net.internet2.edu:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname of-i2 with URL https://foam.net.internet2.edu:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp2-openflow-i2.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2
INFO:omni:Asked https://foam.net.internet2.edu:3626/foam/gapi/1 to reserve resources. Result:
INFO:omni:<?xml version="1.0" ?>
INFO:omni:<!-- Reserved resources for:
	Slice: IG-EXP-6-exp2
	At AM:
	URL: https://foam.net.internet2.edu:3626/foam/gapi/1
 -->
INFO:omni:
<!-- 
This rspec will reserve the OpenFlow resources at Internet2
AM: https://foam.net.internet2.edu:3626/foam/gapi/1
--><rspec type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:schemaLocation="http://www.geni.net/resources/rspec/3            http://www.geni.net/resources/rspec/3/manifest.xsd            http://www.geni.net/resources/rspec/ext/openflow/3            http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd">  
    <openflow:sliver description="IG-EXP-6-exp2 " email="lnevers@bbn.com">    

     <openflow:controller type="primary" url="tcp:mallorea.gpolab.bbn.com:33018"/>    

        <openflow:group name="i2-3716">      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:63:1d" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am"/>              <!-- I2 NEWY 3716 -->      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:6f:e5" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am"/>              <!-- I2 WASH 3716 -->      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:63:6e" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am"/>              <!-- I2 ATLA 3716 -->      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:81:42" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am"/>              <!-- I2 HOUS 3716 -->      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:63:38" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am"/>              <!-- I2 LOSA 3716 -->      
        </openflow:group>    

       <openflow:group name="I2-LOSA-1750-3716">      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+06:d6:00:12:e2:22:63:38" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" dpid="06:d6:00:12:e2:22:63:38">        
                <openflow:port name="15" num="15"/>        
            </openflow:datapath>      
        </openflow:group>    

        <openflow:group name="UEN-1750">      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+06:d6:00:12:e2:22:63:38" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" dpid="06:d6:00:12:e2:22:63:38">        
                <openflow:port name="12" num="12"/>        
            </openflow:datapath>      
        </openflow:group>    

        <openflow:group name="I2-ATLA-1750-3716">      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+06:d6:00:12:e2:22:63:6e" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" dpid="06:d6:00:12:e2:22:63:6e">        
                <openflow:port name="9" num="9"/>        
            </openflow:datapath>      
        </openflow:group>    

        <openflow:match>      

            <openflow:use-group name="i2-3716"/>      
            <openflow:use-group name="UEN-1750"/>      
            <openflow:use-group name="I2-LOSA-1750-3716"/>      
            <openflow:packet>        
	        <openflow:dl_type value="0x800,0x806"/>        
	        <openflow:nw_dst value="10.42.18.0/24"/>        
	        <openflow:nw_src value="10.42.18.0/24"/>        
            </openflow:packet>      

        </openflow:match>    

    </openflow:sliver>  

</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
  Options as run:
		aggregate: of-i2
		framework: pg
		native: True

  Args: createsliver IG-EXP-6-exp2 IG-EXP-6-exp2-openflow-i2.rspec
  Result Summary: Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
Reserved resources on https://foam.net.internet2.edu:3626/foam/gapi/1.  
INFO:omni: ============================================================

Created sliver at NLR FOAM:

$  omni.py createsliver -a of-nlr IG-EXP-6-exp2 IG-EXP-6-exp2-openflow-nlr.rspec -V1
INFO:omni:Loading config file /home/lnevers1/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname of-nlr with URL https://foam.nlr.net:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname of-nlr with URL https://foam.nlr.net:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp2-openflow-nlr.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2
INFO:omni:Asked https://foam.nlr.net:3626/foam/gapi/1 to reserve resources. Result:
INFO:omni:<?xml version="1.0" ?>
INFO:omni:<!-- Reserved resources for:
	Slice: IG-EXP-6-exp2
	At AM:
	URL: https://foam.nlr.net:3626/foam/gapi/1
 -->
INFO:omni:
<!-- 
This rspec will reserve the OpenFlow resources at NLR
AM: https://foam.nlr.net:3626/foam/gapi/1
--><rspec type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:schemaLocation="http://www.geni.net/resources/rspec/3            http://www.geni.net/resources/rspec/3/manifest.xsd            http://www.geni.net/resources/rspec/ext/openflow/3            http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd">  

    <openflow:sliver description="IG-EXP-6-exp2 " email="lnevers@bbn.com">    

        <openflow:controller type="primary" url="tcp:mallorea.gpolab.bbn.com:33018"/>    

        <openflow:group name="nlr-atla-1750-3716">      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+06:d6:00:24:a8:d2:b8:40" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am">        
                <openflow:port num="5"/>                   <!-- to VLAN 3716 -->        
                <openflow:port num="9"/>                   <!-- to AMPATH -->        
                <openflow:port num="11"/>                  <!-- to FIU -->        
                <openflow:port num="49"/>                  <!-- to RENCI -->        
            </openflow:datapath>      
        </openflow:group>    

        <openflow:group name="nlr-3716">      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:23:47:c8:bc:00" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am"/>              <!-- NLR CHIC 3716 -->      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:23:47:ca:bc:40" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am"/>              <!-- NLR SUNN 3716 -->      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:24:a8:d2:48:00" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am"/>              <!-- NLR SEAT 3716 -->      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:24:a8:d2:b8:40" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am"/>              <!-- NLR ATLA 3716 -->      
            <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:26:f1:40:a8:00" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am"/>              <!-- NLR DENV 3716 -->      
        </openflow:group>    

        <openflow:match>      
            <openflow:use-group name="nlr-atla-1750-3716"/>      
            <openflow:use-group name="nlr-3716"/>      
            <openflow:packet>        
	        <openflow:dl_type value="0x800,0x806"/>        
	        <openflow:nw_dst value="10.42.18.0/24"/>        
	        <openflow:nw_src value="10.42.18.0/24"/>        
            </openflow:packet>      
        </openflow:match>    
    </openflow:sliver>  
</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
  Options as run:
		aggregate: of-nlr
		framework: pg
		native: True

  Args: createsliver IG-EXP-6-exp2 IG-EXP-6-exp2-openflow-nlr.rspec
  Result Summary: Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
Reserved resources on https://foam.nlr.net:3626/foam/gapi/1.  
INFO:omni: ============================================================

Created sliver at UEN Regional FOAM:

$ omni.py createsliver -a of-uen IG-EXP-6-exp2 IG-EXP-6-exp2-openflow-uen.rspec -V1 
INFO:omni:Loading config file /home/lnevers1/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname of-uen with URL https://foamyflow.chpc.utah.edu:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname of-uen with URL https://foamyflow.chpc.utah.edu:3626/foam/gapi/1, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp2-openflow-uen.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2
INFO:omni:Asked https://foamyflow.chpc.utah.edu:3626/foam/gapi/1 to reserve resources. Result:
INFO:omni:<?xml version="1.0" ?>
INFO:omni:<!-- Reserved resources for:
	Slice: IG-EXP-6-exp2
	At AM:
	URL: https://foamyflow.chpc.utah.edu:3626/foam/gapi/1
 -->
INFO:omni:
<!-- 
This rspec will reserve the OpenFlow resources at UEN
AM: https://foamyflow.chpc.utah.edu:3626/foam/gapi/1
--><rspec type="manifest" xmlns="http://www.geni.net/resources/rspec/3" xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:schemaLocation="http://www.geni.net/resources/rspec/3            http://www.geni.net/resources/rspec/3/manifest.xsd            http://www.geni.net/resources/rspec/ext/openflow/3            http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd">  

    <openflow:sliver description="IG-EXP-4-exp2 ">    

        <openflow:controller type="primary" url="tcp:mallorea.gpolab.bbn.com:33018"/>    

        <openflow:group name="uen-1750">      
          <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foamyflow.chpc.utah.edu+datapath+06:d6:ac:16:2d:f5:2d:00" component_manager_id="urn:publicid:IDN+openflow:foam:foamyflow.chpc.utah.edu+authority+am" dpid="06:d6:ac:16:2d:f5:2d:00">        
                <openflow:port name="A21" num="21"/>        
                <openflow:port name="A22" num="22"/>        
            </openflow:datapath>      
        </openflow:group>    

        <openflow:match>      
            <openflow:use-group name="uen-1750"/>      
            <openflow:packet>        
	        <openflow:dl_type value="0x800,0x806"/>        
	        <openflow:nw_dst value="10.42.18.0/24"/>        
	        <openflow:nw_src value="10.42.18.0/24"/>        
            </openflow:packet>      

        </openflow:match>    

    </openflow:sliver>  

</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
  Options as run:
		aggregate: of-uen
		framework: pg
		native: True

  Args: createsliver IG-EXP-6-exp2 IG-EXP-6-exp2-openflow-uen.rspec
  Result Summary: Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
Reserved resources on https://foamyflow.chpc.utah.edu:3626/foam/gapi/1.  
INFO:omni: ============================================================

Created sliver at Utah InstaGENI:

$ omni.py createsliver -a ig-utah IG-EXP-6-exp2 IG-EXP-6-exp2-ig-utah.rspec -V2 -t GENI 3
INFO:omni:Loading config file /home/lnevers1/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
INFO:omni:Substituting AM nickname ig-utah with URL https://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-utah with URL https://utah.geniracks.net/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-6-exp2-ig-utah.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2
INFO:omni:Asked https://utah.geniracks.net/protogeni/xmlrpc/am/2.0 to reserve resources. Result:
INFO:omni:<!-- Reserved resources for:
	Slice: IG-EXP-6-exp2
	At AM:
	URL: https://utah.geniracks.net/protogeni/xmlrpc/am/2.0
 -->
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:

  Options as run:
		aggregate: ig-utah
		api_version: 2
		framework: pg
		native: True
		rspectype: ('GENI', '3')

  Args: createsliver IG-EXP-6-exp2 IG-EXP-6-exp2-ig-utah.rspec

  Result Summary: Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-6-exp2 expires on 2013-01-11 00:00:00 UTC
Asked https://utah.geniracks.net/protogeni/xmlrpc/am/2.0 to reserve resources. No manifest Rspec returned. *** verifygenicred:
    /tmp/1BAnaxg0HZ does not conform to schema /usr/testbed/lib/protogeni/security/credential.xsd
 
INFO:omni: ============================================================
  1. Log in to each of the systems in the slice, and send traffic to each other systems; leave traffic running
  2. As Experimenter3, request ListResources from BBN InstaGENI, BBN meso-scale FOAM, and FOAM at Meso-scale Site (Internet2 Site BBN and NLR site is TBD).

As user lnevers2@bbn.com get a listersources from BBN InstaGENI, Utah PG, and from FOAM at I2 and NLR Site:

$ omni.py listresources -a pg-utah  -o         # PG Utah 
$ omni.py listresources -a ig-of-utah -V1 -o 
$ omni.py listresources -a of-uen -V1 -o
$ omni.py listresources -a of-nlr -V1 -o
$ omni.py listresources -a of-indiana -V1 -o
$ omni.py listresources -a of-i2 -V1 -o
$ omni.py listresources -a of-gpo -V1 -o
$ omni.py listresources -a eg-of-gpo -V1 -o
$ omni.py listresources -a eg-of-renci -V1 -o
$ omni.py listresources -a ig-of-gpo -V1 -o
$ omni.py listresources -a pg-utah  -o
$ omni.py listresources -a ig-utah -o
$ omni.py listresources -a ig-gpo -o
  1. Review ListResources output from all AMs.
  2. Define a request RSpec for a VM at the BBN InstaGENI.
  3. Define a request RSpec for a compute resource at the BBN meso-scale site.
  4. Define a request RSpec for a compute resource at a meso-scale site.
  5. Define request RSpecs for OpenFlow resources to allow connection from OpenFlow BBN InstaGENI to Meso-scale OpenFlow sites(BBN and second site TBD) (I2 and NLR).
  6. If PG access to OpenFlow is available, define a request RSpec for the PG OpenFlow resource.
  7. Create a third slice.
  8. Create slivers that connects the TBD Internet2 Meso-scale OpenFlow site to the BBN InstaGENI Site, and the BBN Meso-scale site; and if available, to PG node.
  9. Log in to each of the compute resources in the slice, configure data plane network interfaces on any non-InstaGENI resources as necessary, and send traffic to each other systems; leave traffic running.
  10. Verify that all three experiment continue to run without impacting each other's traffic, and that data is exchanged over the path along which data is supposed to flow.
  11. Review baseline monitoring statistics and checks.
  12. As site administrator, identify all controllers that the BBN InstaGENI OpenFlow switch is connected to
  13. As Experimenter3, verify that traffic only flows on the network resources assigned to slivers as specified by the controller.
  1. Verify that no default controller, switch fail-open behavior, or other resource other than experimenters' controllers, can control how traffic flows on network resources assigned to experimenters' slivers.
  2. Set the hard and soft timeout of flowtable entries
  3. Get switch statistics and flowtable entries for slivers from the OpenFlow switch.
  4. Get layer 2 topology information about slivers in each slice.
  5. Install flows that match only on layer 2 fields, and confirm whether the matching is done in hardware.
  6. If supported, install flows that match only on layer 3 fields, and confirm whether the matching is done in hardware.
  7. Run test for at least 4 hours.
  8. Review monitoring statistics and checks as above.
  9. Delete slivers.

Attachments (11)