wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-5

Version 6 (modified by lnevers@bbn.com, 7 years ago) (diff)

--

IG-EXP-5: InstaGENI Network Resources Acceptance Test

This page captures status for the test case IG-EXP-5, which verifies the ability to support OpenFlow operations and integration with meso-scale compute resources and other compute resources external to the InstaGENI rack. For overall status see the InstaGENI Acceptance Test Status page.

Test Status

This section captures the status for each step in the acceptance test plan.

Step State Ticket Comments
Step 1 Color(yellow,Complete)? Experiment modified to use Utah rack
Step 2 Color(yellow,Complete)?
Step 3 Color(yellow,Complete)?
Step 4 Color(yellow,Complete)?
Step 5 Color(yellow,Complete)?
Step 6 Color(yellow,Complete)?
Step 7 Color(yellow,Complete)?
Step 8 Color(yellow,Complete)?
Step 9 Color(yellow,Complete)?
Step 10 Color(yellow,Complete)?
Step 11 Color(yellow,Complete)?
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Step 18
Step 19
Step 20
Step 21
Step 22
Step 23
Step 24
Step 25
Step 26
Step 27
Step 28
Step 29


State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.


Test Plan Steps

Notes:

  1. All steps in this procedure are executed at Utah InstaGENI, not as originally planned at BBN.
  2. The initial run through combined all steps into one experiment rather than two.
  3. The following aggregate managers nick_names are define in the omni_config used for this test:
ig=,http://utah.geniracks.net/protogeni/xmlrpc/am
pg=,http://www.emulab.net/protogeni/xmlrpc/am
pg2=,https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0
of-bbn=,https://foam.gpolab.bbn.com:3626/foam/gapi/1
of-clemson=,https://foam.clemson.edu:3626/foam/gapi/1
of-i2=,https://foam.net.internet2.edu:3626/foam/gapi/1
of-ig=,https://foam.utah.geniracks.net:3626/foam/gapi/1
of-rutgers=,https://nox.orbit-lab.org:3626/foam/gapi/1
plc-bbn=,http://myplc.gpolab.bbn.com:12346/
plc-clemson=,http://myplc.clemson.edu:12346/

1. As Experimenter1, Determine BBN compute resources and define RSpec

Collect list resources from InstaGENI compute and network aggregate managers.

$ omni.py -a ig listresources IG-EXP-5 -o
$ omni.py -a pg listresources IG-EXP-5 -o
$ omni.py -a of-ig listresources IG-EXP-5 -o
$ omni.py -a of-i2 listresources IG-EXP-5 -o

2. Determine remote meso-scale compute resources and define RSpec

Rspec defined for the meso-scale sites, there are 3 meso-scale sites:

  • 1 WAPG node (pg51) at Rutgers Site via Internet2
  • 1 MyPLC node (planetlab4.clemson.edu) at Clemson Site via NLR
  • 1 MyPLC node (navis.gpolab.bbn.com) at BBN Site Via NLR

3. Define a request RSpec for OpenFlow network resources at the BBN InstaGENI AM

Defined the RSpec for the Utah OpenFlow switch in the ExoGENI rack to the core VLAN 3716. The following RSPec was used:

  • IG-EXP-5-openflow-ig.rspec - Utah InstaGENI Rack FOAM Aggregate network resource request RSpec.
  • IG-EXP-5-compute-ig.rspec - Utah InstaGENI Rack FOAM Aggregate Network resources request Rspec.
  • IG-EXP-5-compute-pg.rspec - Utah ProtoGENI FOAM Aggregate Network resources request Rspec.

4. Define a request RSpec for OpenFlow network resources at the remote I2 Meso-scale site

An RSpec was defined for each site FOAM aggregate and compute resources aggregate. The following RSpec were used for the meso-scale sites:

  • IG-EXP-5-wapg-rutgers.rspec - Rutgers WAPG nodes pg51 compute resource request RSpec.
  • IG-EXP-5-openflow-rutgers.rspec - Rutgers FOAM Aggregate network resource request RSpec.
  • IG-EXP-5-myplc-clemson.rspec - Clemson MyPLC node planetlab4 compute resource request RSpec.
  • IG-EXP-5-openflow-clemson.rspec - Clemson FOAM Aggregate network resource request RSpec.
  • IG-EXP-5-myplc-bbn.rspec - BBN MyPLC node navis compute resource request RSpec.
  • IG-EXP-5-openflow-bbn.rspec - BBN FOAM Aggregate network resource request RSpec.

All RSpecs above can be found at the following "inster_location_here"

5. Define a request RSpec for the OpenFlow Core resources

The OF core resources for VLAN 3716 were defined as follows:

  • IG-EXP-5-openflow-i2.rspec = Internet2 Core FOAM Aggregate network resources request RSpec.
  • IG-EXP-5-openflow-nlr.rspec - NLR Core FOAM Aggregate network resources request RSpec.

6. Create the first slice

Created the first slice as with GPO ProtoGENI credentials:

omni.py createslice IG-EXP-5

7. Create a sliver for the BBN compute resources

Created slivers at:

  • PG Utah compute resource aggregate

omni.py -a pg createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-compute-pg.rspec

8. Create a sliver at the I2 meso-scale site using FOAM at site

Created a sliver at the Rutgers FOAM for VLAN 3716:

 ./src/omni.py -a of-rutgers createsliver IG-EXP-5-scenario1 instarspec/IG-EXP-5-openflow-rutgers.rspec

9. Create a sliver at of the BBN InstaGENI AM

Created slivers at:

  • InstaGENI rack compute resource aggregate
  • InstaGENI rack FOAM network resource aggregate

omni.py -a ig createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-compute-ig.rspec
omni.py -a of-ig createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-ig.rspec

To login to the compute resources above determine the following:

omni.py -a ig sliverstatus IG-EXP-5 -o
egrep "hostname|port" IG-EXP-5-sliverstatus-utah-geniracks-net-protogeni.json

10. Create a sliver for the OpenFlow resources in the core

Created slivers at Internet2 and NLR FOAM network resource aggregate:

omni.py -a of-i2 createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-i2.rspec 
omni.py -a of-nlr createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-nlr.rspec 

10a. Create a sliver for all remaining Meso-scale compute and network resources

The following slivers were created:

omni.py -a pg2 createsliver IG-EXP-5 --api-version 2 -t GENI 3./instarspec/IG-EXP-5/IG-EXP-5-wapg-rutgers.rspec
omni.py -a of-rutgers createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-rutgers.rspec 
omni.py -a plc-clemson createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-myplc-clemson.rspec 
omni.py -a of-clemson createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-clemson.rspec 
omni.py -a plc-bbn createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-myplc-bbn.rspec
omni.py -a of-bbn createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-bbn.rspec 

11. Log in to each of the compute resources and send traffic to the other end-point

The nodes assigned for compute resources were determined as follows:

omni.py -a ig sliverstatus IG-EXP-5 -o
omni.py -a of-ig sliverstatus IG-EXP-5 -o
omni.py -a of-i2 sliverstatus IG-EXP-5 -o
omni.py -a pg2  sliverstatus IG-EXP-5 -o
omni.py -a plc-clemson  sliverstatus IG-EXP-5 -o
omni.py -a plc-bbn  sliverstatus IG-EXP-5 -o

The above created output files named IG-EXP-5-sliverstatus-SITENAME.json from which the assigned hosts can be determined:

egrep "hostname" IG-EXP-5-sliverstatus-SITENAME.json

For this experiment, local PG resources were also configured to be allowed on VLAN 1750 thorough the InstaGENI rack, the following sliver was created:

omni.py -a pg createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-compute-pg.rspec

To login to this resource, determined access details as follows:

omni.py -a pg sliverstatus IG-EXP-5 -o
egrep "hostname|port" IG-EXP-5-sliverstatus-utah-geniracks-net-protogeni.json

12. Verify that traffic is delivered to target

13. Review baseline, GMOC, and meso-scale monitoring statistics

14. As Experimenter2, determine BBN compute resources and define RSpec

Note: for initial run through of this test only one set of credentials were used

15. Determine remote meso-scale compute resources and define RSpec

16. Define a request RSpec for OpenFlow network resources at the BBN InstaGENI AM

17. Define a request RSpec for OpenFlow network resources at the remote NLR Meso-scale site

18. Define a request RSpec for the OpenFlow Core resources

19. Create the second slice

20. Create a sliver for the BBN compute resources

21. Create a sliver at the meso-scale site using FOAM at site

22. Create a sliver at of the BBN InstaGENI AM

23. Create a sliver for the OpenFlow resources in the core

24. Create a sliver for the meso-scale compute resources

25. Log in to each of the compute resources and send traffic to the other endpoint

26. As Experimenter2, insert flowmods and send packet-outs only for traffic assigned to the slivers

27. Verify that traffic is delivered to target according to the flowmods settings

28. Review baseline, GMOC, and monitoring statistics

29. Stop traffic and delete slivers

Attachments (7)