Version 48 (modified by 11 years ago) (diff) | ,
---|
IG-EXP-5: InstaGENI Network Resources Acceptance Test
This page captures status for the test case IG-EXP-5, which verifies the ability to support OpenFlow operations and integration with meso-scale compute resources and other compute resources external to the InstaGENI rack. For overall status see the InstaGENI Acceptance Test Status page.
Last Update: 2013/01/16
Test Status
This section captures the status for each step in the acceptance test plan.
Step | State | Ticket | Comments |
Step 1 | Color(green,Pass)? | ||
Step 2 | Color(green,Pass)? | ||
Step 3 | Color(green,Pass)? | ||
Step 4 | Color(green,Pass)? | ||
Step 5 | Color(green,Pass)? | ||
Step 6 | Color(green,Pass)? | ||
Step 7 | Color(green,Pass)? | ||
Step 8 | Color(green,Pass)? | ||
Step 9 | Color(green,Pass)? | ||
Step 10 | Color(green,Pass)? | ||
Step 11 | Color(yellow,Complete)? | ||
Step 12 | Color(yellow,Complete)? | ||
Step 13 | Color(yellow,Complete)? | ||
Step 14 | Color(yellow,Complete)? | ||
Step 15 | Color(yellow,Complete)? | ||
Step 16 | Color(yellow,Complete)? | ||
Step 17 | Color(yellow,Complete)? | ||
Step 18 | Color(yellow,Complete)? | ||
Step 19 | Color(yellow,Complete)? | ||
Step 20 | Color(yellow,Complete)? | ||
Step 21 | Color(yellow,Complete)? | ||
Step 22 | Color(yellow,Complete)? | ||
Step 23 | Color(yellow,Complete)? | ||
Step 24 | Color(yellow,Complete)? | ||
Step 25 | Color(yellow,Complete)? | ||
Step 26 | Color(yellow,Complete)? | ||
Step 27 | Color(#63B8FF,In Progress)? | ||
Step 28 | Color(yellow,Complete)? | ||
Step 29 | Color(yellow,Complete)? |
State Legend | Description |
Color(green,Pass)? | Test completed and met all criteria |
Color(#98FB98,Pass: most criteria)? | Test completed and met most criteria. Exceptions documented |
Color(red,Fail)? | Test completed and failed to meet criteria. |
Color(yellow,Complete)? | Test completed but will require re-execution due to expected changes |
Color(orange,Blocked)? | Blocked by ticketed issue(s). |
Color(#63B8FF,In Progress)? | Currently under test. |
Test Plan Steps
This procedure is executed at GPO InstaGENI and it uses three set of credentials to setup 3 separate experiments. The PG Utah aggregate is used to reserve two WAPG nodes, one at Rutgers (Internet2) and one at Indiana (NLR).
The following aggregate managers nick_names are define in the omni_config used for this test:
ig-utah=,http://utah.geniracks.net/protogeni/xmlrpc/am/2.0 of-ig=,https://foam.utah.geniracks.net:3626/foam/gapi/1 pg-utah=,https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0 pg-gpo=,https://pgeni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0 # WAPG nodes #OpenFlow Aggregates ig-of-gpo=,https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1 #GPO IG of-gpo=,https://foam.gpolab.bbn.com:3626/foam/gapi/1 #GPO Site of-nlr=,https://foam.nlr.net:3626/foam/gapi/1 of-i2=,https://foam.net.internet2.edu:3626/foam/gapi/1 of-indiana=,https://foam.noc.iu.edu:3626/foam/gapi/1 of-rutgers=,https://nox.orbit-lab.org:3626/foam/gapi/1
1. As Experimenter1 (lnevers@bbn.com), determine PG site compute resources and define RSpec
Collect list resources from InstaGENI compute and network aggregate managers for the first experiment:
$ omni.py -a ig-gpo listresources -o $ omni.py -a ig-of-gpo listresources -V1 -o $ omni.py -a of-i2 listresources -V1 -o $ omni.py -a of-nlr listresources -V1 -o $ omni.py -a of-rutgers listresources -V1 -o $ omni.py -a pg-utah listresources -o
2. Determine remote Meso-scale compute resources and define RSpec
For Experiment1, a Rutgers WAPG node is used as a remote Meso-scale. RSpecs were defined for Rutgers FOAM aggregate and WAPG compute resource. The following RSpec is used for the Rutgers Meso-scale site:
- IG-EXP-5-exp1-rutgers-wapg.rspec - Rutgers WAPG nodes pg51 compute resource request RSpec.
3. Define a request RSpec for OpenFlow network resources at the InstaGENI AM
GPO campus resources RSpec IG-EXP-5-exp1-openflow-ig-gpo.rspec which access the OpenFlow VLAN 1750 via the InstaGENI OpenFlow switch in the GPO InstaGENI Rack.
The InstaGENI Rack access the backbone via the GPO OpenFlow Switch, which require a separate request to the GPO Site FOAM IG-EXP-5-exp1-openflow-gpo.rspec.
4. Define a request RSpec for OpenFlow network resources at the remote I2 Meso-scale site
The following RSpec is used for the Rutgers FOAM Aggregate:
- IG-EXP-5-exp1-openflow-rutgers.rspec - Rutgers FOAM Aggregate network resource request RSpec.
5. Define a request RSpec for the OpenFlow Core resources
The RSpec IG-EXP-5-exp1-openflow-i2.rspec defines the Internet2 Core FOAM Aggregate network resources request.
The RSpec IG-EXP-5-exp1-openflow-nlr.rspec defines the NLR Core FOAM Aggregate network resources request.
6. Create the first slice
Created the first slice as with GPO ProtoGENI credentials lnevers@bbn.com:
$ omni.py createslice IG-EXP-5-exp1 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Created slice with Name IG-EXP-5-exp1, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1, Expiration 2013-01-17 15:19:02+00:00 INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createslice: Options as run: framework: pg Args: createslice IG-EXP-5-exp1 Result Summary: Created slice with Name IG-EXP-5-exp1, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1, Expiration 2013-01-17 15:19:02+00:00 INFO:omni: ============================================================
7. Create a sliver for the GPO compute resources
The compute resources at the BBN campus only require a FOAM request to allow the connections though the OpenFlow switch in the InstaGENI rack.
$ $ omni.py -a of-gpo createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-openflow-gpo.rspec -V1 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname of-gpo with URL https://foam.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 expires on 2013-01-17 15:19:02 UTC INFO:omni:Substituting AM nickname of-gpo with URL https://foam.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Substituting AM nickname of-gpo with URL https://foam.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file IG-EXP-5-exp1-openflow-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 INFO:omni:Got return from CreateSliver for slice IG-EXP-5-exp1 at https://foam.gpolab.bbn.com:3626/foam/gapi/1: INFO:omni:<?xml version="1.0" encoding="UTF-8"?> INFO:omni: <!-- Reserved resources for: Slice: IG-EXP-5-exp1 at AM: URN: unspecified_AM_URN URL: https://foam.gpolab.bbn.com:3626/foam/gapi/1 --> INFO:omni: <!-- AM: https://foam.gpolab.bbn.com:3626/foam/gapi/1 --> <rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3" xs:schemaLocation="http://www.geni.net/resources/rspec/3 http://www.geni.net/resources/rspec/3/manifest.xsd http://www.geni.net/resources/rspec/ext/openflow/3 http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd" type="manifest"> <openflow:sliver description="IG-EXP-5-exp1" email="lnevers@bbn.com"> <openflow:controller url="tcp:mallorea.gpolab.bbn.com:33020" type="primary" /> <openflow:group name="poblano-1750-nlr-3716"> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.gpolab.bbn.com+datapath+06:d6:00:12:e2:b8:a5:d0" component_manager_id="urn:publicid:IDN+openflow:foam:foam.gpolab.bbn.com+authority+am"> <openflow:port num="5"/> <!-- to NLR 3716 --> <openflow:port num="16"/> <!-- to BBN InstaGENI rack --> </openflow:datapath> </openflow:group> <openflow:match> <openflow:use-group name="poblano-1750-nlr-3716" /> <openflow:packet> <openflow:dl_type value="0x800,0x806"/> <openflow:nw_dst value="10.42.11.0/24"/> <openflow:nw_src value="10.42.11.0/24"/> </openflow:packet> </openflow:match> </openflow:sliver> </rspec> INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: ['of-gpo'] api_version: 1 framework: pg Args: createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-openflow-gpo.rspec Result Summary: Got Reserved resources RSpec from foam-gpolab-bbn-com INFO:omni: ============================================================
8. Create a sliver at the I2 meso-scale site using FOAM at site
Created a sliver at the Rutgers FOAM for VLAN 3716:
$ omni.py -a of-rutgers createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-openflow-rutgers.rspec -V1 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname of-rutgers with URL https://nox.orbit-lab.org:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 expires on 2013-01-17 15:19:02 UTC INFO:omni:Substituting AM nickname of-rutgers with URL https://nox.orbit-lab.org:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Substituting AM nickname of-rutgers with URL https://nox.orbit-lab.org:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file IG-EXP-5-exp1-openflow-rutgers.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 INFO:omni:Got return from CreateSliver for slice IG-EXP-5-exp1 at https://nox.orbit-lab.org:3626/foam/gapi/1: INFO:omni:<?xml version="1.0" encoding="UTF-8"?> INFO:omni: <!-- Reserved resources for: Slice: IG-EXP-5-exp1 at AM: URN: unspecified_AM_URN URL: https://nox.orbit-lab.org:3626/foam/gapi/1 --> INFO:omni: <!-- This rspec will reserve the OpenFlow resources at Rutgers used by the EG-EXP-5 Experiment 1. AM: https://nox.orbit-lab.org:3626/foam/gapi/1 --> <rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3" xs:schemaLocation="http://www.geni.net/resources/rspec/3 http://www.geni.net/resources/rspec/3/manifest.xsd http://www.geni.net/resources/rspec/ext/openflow/3 http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd" type="manifest"> <openflow:sliver description="IG-EXP-5-exp1" email="lnevers@bbn.com"> <openflow:controller url="tcp:mallorea.gpolab.bbn.com:33020" type="primary" /> <openflow:group name="rutgers-1750-i2-3716"> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:internal2.orbit-lab.org+datapath+00:00:00:10:10:17:50:01" component_manager_id="urn:publicid:IDN+openflow:foam:internal2.orbit-lab.org+authority+am"> <openflow:port num="5"/> <openflow:port num="9"/> <openflow:port num="10"/> <openflow:port num="11"/> <openflow:port num="12"/> </openflow:datapath> </openflow:group> <openflow:match> <openflow:use-group name="rutgers-1750-i2-3716" /> <openflow:packet> <openflow:dl_type value="0x800,0x806"/> <openflow:nw_dst value="10.42.11.0/24"/> <openflow:nw_src value="10.42.11.0/24"/> </openflow:packet> </openflow:match> </openflow:sliver> </rspec> INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: ['of-rutgers'] api_version: 1 framework: pg Args: createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-openflow-rutgers.rspec Result Summary: Got Reserved resources RSpec from nox-orbit-lab-org INFO:omni: ============================================================
9. Create a sliver at of the GPO InstaGENI AM
The GPO InstaGENI FOAM requires a sliver to allow the InstaGENI campus traffic to the core:
$ omni.py -a ig-of-gpo createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-openflow-ig-gpo.rspec -V1 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname ig-of-gpo with URL https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 expires on 2013-01-17 15:19:02 UTC INFO:omni:Substituting AM nickname ig-of-gpo with URL https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Substituting AM nickname ig-of-gpo with URL https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file IG-EXP-5-exp1-openflow-ig-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 INFO:omni:Got return from CreateSliver for slice IG-EXP-5-exp1 at https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1: INFO:omni:<?xml version="1.0" encoding="UTF-8"?> INFO:omni: <!-- Reserved resources for: Slice: IG-EXP-5-exp1 at AM: URN: unspecified_AM_URN URL: https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1 --> INFO:omni: <!-- This rspec will reserve the OpenFlow resources in the InstaGENI rack AM: https://foam.instageni.gpolab.bbn.com:3626/foam/gapi/1 --> <rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3" xs:schemaLocation="http://www.geni.net/resources/rspec/3 http://www.geni.net/resources/rspec/3/manifest.xsd http://www.geni.net/resources/rspec/ext/openflow/3 http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd" type="manifest"> <openflow:sliver description="EG-EXP-5-exp1" email="lnevers@bbn.com" > <openflow:controller url="tcp:mallorea.gpolab.bbn.com:33020" type="primary" /> <openflow:group name="bbn-instageni"> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.instageni.gpolab.bbn.com+datapath+06:d6:84:34:97:c6:c9:00" component_manager_id="urn:publicid:IDN+openflow:foam:foam.instageni.gpolab.bbn.com+authority+am" /> </openflow:group> <openflow:match> <openflow:use-group name="bbn-instageni" /> <openflow:packet> <openflow:dl_type value="0x800,0x806"/> <openflow:nw_dst value="10.42.11.0/24"/> <openflow:nw_src value="10.42.11.0/24"/> </openflow:packet> </openflow:match> <openflow:match> <openflow:use-group name="bbn-instageni" /> <openflow:packet> <openflow:dl_vlan value="3705"/> </openflow:packet> </openflow:match> </openflow:sliver> </rspec> INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: ['ig-of-gpo'] api_version: 1 framework: pg Args: createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-openflow-ig-gpo.rspec Result Summary: Got Reserved resources RSpec from foam-instageni-gpolab-bbn-com INFO:omni: ============================================================
10. Create a sliver for the OpenFlow resources in the core
Created slivers at Internet2 and NLR FOAM network resource aggregate:
$ omni.py -a of-i2 createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-openflow-i2.rspec -V1 INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname of-i2 with URL https://foam.net.internet2.edu:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 expires on 2013-01-17 15:19:02 UTC INFO:omni:Substituting AM nickname of-i2 with URL https://foam.net.internet2.edu:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Substituting AM nickname of-i2 with URL https://foam.net.internet2.edu:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file IG-EXP-5-exp1-openflow-i2.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 INFO:omni:Got return from CreateSliver for slice IG-EXP-5-exp1 at https://foam.net.internet2.edu:3626/foam/gapi/1: INFO:omni:<?xml version="1.0" encoding="UTF-8"?> INFO:omni: <!-- Reserved resources for: Slice: IG-EXP-5-exp1 at AM: URN: unspecified_AM_URN URL: https://foam.net.internet2.edu:3626/foam/gapi/1 --> INFO:omni: <!-- This rspec will reserve the OpenFlow resources at Internet2 AM: https://foam.net.internet2.edu:3626/foam/gapi/1 --> <rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3" xs:schemaLocation="http://www.geni.net/resources/rspec/3 http://www.geni.net/resources/rspec/3/manifest.xsd http://www.geni.net/resources/rspec/ext/openflow/3 http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd" type="manifest"> <openflow:sliver description="IG-EXP-5-exp1 " email="lnevers@bbn.com"> <openflow:controller url="tcp:mallorea.gpolab.bbn.com:33020" type="primary" /> <openflow:group name="i2-3716"> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:63:1d" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" /> <!-- I2 NEWY 3716 --> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:6f:e5" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" /> <!-- I2 WASH 3716 --> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:63:6e" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" /> <!-- I2 ATLA 3716 --> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:81:42" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" /> <!-- I2 HOUS 3716 --> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+0e:84:00:12:e2:22:63:38" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" /> <!-- I2 LOSA 3716 --> </openflow:group> <openflow:group name="I2-LOSA-1750-3716"> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+06:d6:00:12:e2:22:63:38" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" dpid="06:d6:00:12:e2:22:63:38"> <openflow:port name="15" num="15"/> </openflow:datapath> </openflow:group> <openflow:group name="UEN-1750"> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+06:d6:00:12:e2:22:63:38" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" dpid="06:d6:00:12:e2:22:63:38"> <openflow:port name="12" num="12"/> </openflow:datapath> </openflow:group> <openflow:group name="I2-ATLA-1750-3716"> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+datapath+06:d6:00:12:e2:22:63:6e" component_manager_id="urn:publicid:IDN+openflow:foam:foam.net.internet2.edu+authority+am" dpid="06:d6:00:12:e2:22:63:6e"> <openflow:port name="9" num="9"/> </openflow:datapath> </openflow:group> <openflow:match> <openflow:use-group name="i2-3716" /> <openflow:use-group name="UEN-1750" /> <openflow:use-group name="I2-LOSA-1750-3716" /> <openflow:packet> <openflow:dl_type value="0x800,0x806"/> <openflow:nw_dst value="10.42.11.0/24"/> <openflow:nw_src value="10.42.11.0/24"/> </openflow:packet> </openflow:match> </openflow:sliver> </rspec> INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: ['of-i2'] api_version: 1 framework: pg Args: createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-openflow-i2.rspec Result Summary: Got Reserved resources RSpec from foam-net-internet2-edu INFO:omni: ============================================================ $ omni.py -a of-nlr createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-openflow-nlr.rspec -V1INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname of-nlr with URL https://foam.nlr.net:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 expires on 2013-01-17 15:19:02 UTC INFO:omni:Substituting AM nickname of-nlr with URL https://foam.nlr.net:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Substituting AM nickname of-nlr with URL https://foam.nlr.net:3626/foam/gapi/1, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file IG-EXP-5-exp1-openflow-nlr.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 INFO:omni:Got return from CreateSliver for slice IG-EXP-5-exp1 at https://foam.nlr.net:3626/foam/gapi/1: INFO:omni:<?xml version="1.0" encoding="UTF-8"?> INFO:omni: <!-- Reserved resources for: Slice: IG-EXP-5-exp1 at AM: URN: unspecified_AM_URN URL: https://foam.nlr.net:3626/foam/gapi/1 --> INFO:omni: <!-- This rspec will reserve the OpenFlow resources at NLR AM: https://foam.nlr.net:3626/foam/gapi/1 --> <rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xmlns:openflow="http://www.geni.net/resources/rspec/ext/openflow/3" xs:schemaLocation="http://www.geni.net/resources/rspec/3 http://www.geni.net/resources/rspec/3/manifest.xsd http://www.geni.net/resources/rspec/ext/openflow/3 http://www.geni.net/resources/rspec/ext/openflow/3/of-resv.xsd" type="manifest"> <openflow:sliver description="IG-EXP-5-exp1 " email="lnevers@bbn.com"> <openflow:controller url="tcp:mallorea.gpolab.bbn.com:33020" type="primary" /> <openflow:group name="nlr-atla-1750-3716"> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+06:d6:00:24:a8:d2:b8:40" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am"> <openflow:port num="5"/> <!-- to VLAN 3716 --> <openflow:port num="9"/> <!-- to AMPATH --> <openflow:port num="11"/> <!-- to FIU --> <openflow:port num="49"/> <!-- to RENCI --> </openflow:datapath> </openflow:group> <openflow:group name="nlr-3716"> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:23:47:c8:bc:00" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am" /> <!-- NLR CHIC 3716 --> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:23:47:ca:bc:40" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am" /> <!-- NLR SUNN 3716 --> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:24:a8:d2:48:00" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am" /> <!-- NLR SEAT 3716 --> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:24:a8:d2:b8:40" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am" /> <!-- NLR ATLA 3716 --> <openflow:datapath component_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+datapath+0e:84:00:26:f1:40:a8:00" component_manager_id="urn:publicid:IDN+openflow:foam:foam.nlr.net+authority+am" /> <!-- NLR DENV 3716 --> </openflow:group> <openflow:match> <openflow:use-group name="nlr-atla-1750-3716" /> <openflow:use-group name="nlr-3716" /> <openflow:packet> <openflow:dl_type value="0x800,0x806"/> <openflow:nw_dst value="10.42.11.0/24"/> <openflow:nw_src value="10.42.11.0/24"/> </openflow:packet> </openflow:match> </openflow:sliver> </rspec> INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: ['of-nlr'] api_version: 1 framework: pg Args: createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-openflow-nlr.rspec Result Summary: Got Reserved resources RSpec from foam-nlr-net INFO:omni: ============================================================
10a. Create a sliver for all remaining Meso-scale compute and network resources
WAPG nodes are part of the Utah PG aggregate, created a sliver at the PG site to request the Rutgers WAPG node:
$ omni.py -a pg-utah createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-rutgers-wapg.rspec INFO:omni:Loading config file /home/lnevers/.gcf/omni_config INFO:omni:Using control framework pg INFO:omni:Substituting AM nickname pg-utah with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 expires on 2013-01-17 15:19:02 UTC INFO:omni:Substituting AM nickname pg-utah with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Substituting AM nickname pg-utah with URL https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file IG-EXP-5-exp1-rutgers-wapg.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-5-exp1 INFO:omni:Got return from CreateSliver for slice IG-EXP-5-exp1 at https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0: INFO:omni:<!-- Reserved resources for: Slice: IG-EXP-5-exp1 at AM: URN: unspecified_AM_URN URL: https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0 --> INFO:omni:<rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" type="manifest" xsi:schemaLocation="http://www.geni.net/resources/rspec/3 http://www.geni.net/resources/rspec/3/manifest.xsd"> <node client_id="wapg-rutgers-pg51" component_id="urn:publicid:IDN+emulab.net+node+pg51" component_manager_id="urn:publicid:IDN+emulab.net+authority+cm" component_name="pg51" exclusive="true" sliver_id="urn:publicid:IDN+emulab.net+sliver+106079"> <interface client_id="wapg-rutgers-pg51:if0"> <ip address="10.42.11.151" netmask="255.255.255.0"/> </interface> <sliver_type name="raw-pc"/><rs:vnode xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1" name="pg51"/><host name="wapg-rutgers-pg51.IG-EXP-5-exp1.pgeni-gpolab-bbn-com.emulab.net"/><services><login authentication="ssh-keys" hostname="pg51.emulab.net" port="22" username="lnevers"/></services></node> </rspec> INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: ['pg-utah'] framework: pg Args: createsliver IG-EXP-5-exp1 IG-EXP-5-exp1-rutgers-wapg.rspec Result Summary: Got Reserved resources RSpec from www-emulab-net-protogeniv2 INFO:omni: ============================================================
11. Log in to each of the compute resources and send traffic to the other end-point
Verify that all slivers are ready:
$ omni.py -a ig-of-gpo sliverstatus IG-EXP-5-exp1 -V1 $ omni.py -a of-gpo sliverstatus IG-EXP-5-exp1 -V1 $ omni.py -a of-i2 sliverstatus IG-EXP-5-exp1 -V1 $ omni.py -a of-nlr sliverstatus IG-EXP-5-exp1 -V1 $ omni.py -a of-rutgers sliverstatus IG-EXP-5-exp1 -V1 $ omni.py -a pg-utah sliverstatus IG-EXP-5-exp1
The site campus resource are not allocated by the InstaGENI Compute resource aggregate, therefore they are setup before the experiment to have interfaces on VLAN 1750 via a port on the GPO InstaGENI Switch.
When all slivers are ready, determine login for Rutgers nodes:
$ readyToLogin.py -a pg-utah IG-EXP-5-exp1
12. Verify that traffic is delivered to target
Exchanged traffic from the remote meso-scale resource at Rutgers to the GPO campus host.
From the Meso-scale Rutger WAPG node ping the GPO campus resource:
$ ssh lnevers@pg51.emulab.net
From the GPO Campus resource ping the remote Meso-scale site Rutgers WAPG:
$ ssh lnevers@siovale.gpolab.bbn.com
13. Review baseline, GMOC, and meso-scale monitoring statistics
Iperf tests were run for a few scenarios and are captured in this step. The Iperf server is run on the InstaGENI VM for each scenario.
Two InstaGENI VMs on the Shared VLAN 1750
In a scenario where two VMs where reserved on the shared VLAN 1750, Iperf was run to capture the following statistics:
[ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec
One InstaGENI VMs and One Emulab VM node both on share VLAN 1750
In a scenario where one VMs was reserved on the shared VLAN 1750 and one VM node reserved on VLAN 1750 at the Emulab aggregate. Iperf was run to capture the following statistics:
[ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec
One InstaGENI VMs and One Rutgers WAPG node both on share VLAN 1750
In a scenario where one VMs was reserved on the shared VLAN 1750 and one WAPG node at Rutgers reserved on VLAN 1750. Iperf was run to capture the following statistics:
[ ID] Interval Transfer Bandwidth [ 3] 0.0-10.6 sec 3.29 MBytes 2.61 Mbits/sec
14. As Experimenter2, determine Utah site compute resources and define RSpec
As Experimenter2 (lnevers2@bbn.com) determined available resources:
$ omni.py -a plc-clemson listresources -o $ omni.py -a of-clemson listresources -V1 -o $ omni.py -a of-nlr listresources -V1 -o $ omni.py -a of-ig listresources -V1 -o
15. Determine remote meso-scale NLR compute resources and define RSpec
The Clemson site was used as a remote meso-scale site and the file IG-EXP-5-myplc-clemson.rspec captures the Clemson MyPLC node planetlab4 compute resource request.
16. Define a request RSpec for OpenFlow network resources at the Utah InstaGENI AM
Defined the IG-EXP-5-exp2-pg-site.rspec file to request the ProtoGENI site compute resources request for experiment2.
17. Define a request RSpec for OpenFlow network resources at the remote NLR Meso-scale site
Defined the file IG-EXP-5-openflow-clemson.rspec to capture the Clemson FOAM Aggregate network resource request needed to allow the MyPLC node (planetlab4.clemson.edu) access to the OpenFlow network core.
18. Define a request RSpec for the OpenFlow Core resources
Defined IG-EXP-5-openflow-nlr.rspec to capture the NLR Core FOAM Aggregate network resources request.
19. Create the second slice
As experimenter2 (lnevers2@bbn.com) created a slice:
$ omni.py createslice IG-EXP-5-exp2
20. Create a sliver for the Utah compute resources
Created a sliver for the site resources at the Utah PG as follows:
$ omni.py -a pg createsliver IG-EXP-5-exp2 IG-EXP-5-exp2-pg-site.rspec
21. Create a sliver at the meso-scale site using FOAM at site
Created a sliver at the Clemson FOAM aggregate requesting the network resources required to allow the MyPLC host to access the OpenFlow Backbone VLAN 3716:
$ omni.py -a of-clemson createsliver IG-EXP-5-exp2 IG-EXP-5-exp2-openflow-clemson.rspec -V1
22. Create a sliver at of the Utah InstaGENI AM
Created slivers at the InstaGENI rack FOAM network resource aggregate to allow the PG site resources to access the OpenFlow backbone:
$ omni.py -a of-ig createsliver IG-EXP-5-exp2 IG-EXP-5-exp2-openflow-ig.rspec -V1
23. Create a sliver for the OpenFlow resources in the core
Created sliver at NLR FOAM network resource aggregates:
$ omni.py -a of-nlr createsliver IG-EXP-5-exp2 IG-EXP-5-exp2-openflow-nlr.rspec -V1
24. Create a sliver for the meso-scale compute resources
Requested the MyPLC node at the Clemson resource aggregate:
$ omni.py -a plc-clemson createsliver IG-EXP-5-exp2 IG-EXP-5-exp2-myplc-clemson.rspec -V1
25. Log in to each of the compute resources and send traffic to the other endpoint
Verify that each sliver is ready, but checking the "geni_status" for each sliver:
$ omni.py -a pg sliverstatus IG-EXP-5-exp2 $ omni.py -a of-ig sliverstatus IG-EXP-5-exp2 -V1 $ omni.py -a of-nlr sliverstatus IG-EXP-5-exp2 -V1 $ omni.py -a of-clemson sliverstatus IG-EXP-5-exp2 -V1 $ omni.py -a plc-clemson sliverstatus IG-EXP-5-exp2
Verify the status for each compute resource sliver, and use login information when ready:
$ omni.py -a plc-clemson sliverstatus IG-EXP-5-exp2 -o $ omni.py -a pg sliverstatus IG-EXP-5-exp2 -o
Used the readToLogin.py script to determine state of the sliver and the login information for the PG compute resource sliver :
$ ./examples/readyToLogin.py -a pg IG-EXP-5-exp2 .... ================================================================================ Aggregate [http://www.emulab.net/protogeni/xmlrpc/am] has a ProtoGENI sliver. pc515.emulab.net's geni_status is: ready Login using: xterm -e ssh -i /home/lnevers2/.ssh/geni_key lnevers2@pc515.emulab.net -p 35386 & ================================================================================
Used the readToLogin.py script to determine state of the sliver and the login information for the MyPLC compute resource sliver at Clemson:
$ ./examples/readyToLogin.py -a plc-clemson IG-EXP-5-exp2 ... ================================================================================ Aggregate [http://myplc.clemson.edu:12346/] has a PlanetLab sliver. planetlab4.clemson.edu's geni_status is: ready (pl_boot_state:boot) Login using: xterm -e ssh -i /home/lnevers2/.ssh/geni_key pgenigpolabbbncom_IGEXP5exp2@planetlab4.clemson.edu & ================================================================================
Was able to exchange ping traffic between each of the compute resources.
At PG site resource:
[lnevers2@utah-pg ~]$ ping 10.42.18.104
At Clemson MyPLC site:
pgenigpolabbbncom_IGEXP5exp2@planetlab4 ~]$ ping 10.42.18.34
26. As Experimenter1, insert flowmods and send packet-outs only for traffic assigned to the slivers
For this portion of testing, the FloodLight OpenFlow controller was used and these nodes were reserved:
- At InstaGENI Rack, the two nodes using the addresses "10.42.11.32" and "10.42.11.33"
- At Emulab on Shared VLAN 1750 one node using address "10.42.11.34"
- At Rutgers WAPG node pg51 using address "10.42.11.151".
First, checked the existing switches:
$ curl http://localhost:9090/wm/core/controller/switches/json [{"dpid":"00:00:0e:84:40:39:18:1b"}, ## Internet2 New York {"dpid":"06:d6:ac:16:2d:f5:2d:00"}, ## UEN OF Switch {"dpid":"00:00:0e:84:40:39:19:96"}, ## Internet2 Atlanta (VLAN 1750 to 3716) {"dpid":"00:00:0e:84:40:39:1b:93"}, ## Internet2 Los Angeles OF Switch (VLAN 3716) {"dpid":"00:00:06:d6:40:39:1b:93"}, ## Internet2 Los Angeles OF Switch (VLAN 1750 to 3716) {"dpid":"00:00:0e:84:40:39:1a:57"}, ## Internet2 OF Houston Switch {"dpid":"00:00:0e:84:40:39:18:58"}, ## Internet2 OF Washington Switch {"dpid":"06:d6:00:24:a8:5d:0b:00"}, ## InstaGENI Rack OF Switch {"dpid":"00:00:00:10:10:17:50:01"}] ## Rutgers OF Switch
For this section of the test, each of the 4 hosts ("10.42.11.32" (InstaGENI), "10.42.11.33" (InstaGENI), "10.42.11.34" (Emulab), and "10.42.11.151" (WAPG)) are pinging each other to generate flows. Following is a list of flows on the FloodLight controller:
$ curl http://localhost:9090/wm/core/switch/06:d6:00:24:a8:5d:0b:00/flow/json {"06:d6:00:24:a8:5d:0b:00": [{"cookie":9007199254740992,"idleTimeout":5,"hardTimeout":0,"match":{"dataLayerDestination":"00:1f:29:32:72:b5", "dataLayerSource":"02:3a:2d:fc:da:7a","dataLayerType":"0x0800","dataLayerVirtualLan":-1, "dataLayerVirtualLanPriorityCodePoint":0,"inputPort":10,"networkDestination":"10.42.11.151", "networkDestinationMaskLen":32,"networkProtocol":0,"networkSource":"10.42.11.32","networkSourceMaskLen":32, "networkTypeOfService":0,"transportDestination":0,"transportSource":0,"wildcards":3145952},"durationSeconds":842, "durationNanoseconds":387000000,"packetCount":836,"byteCount":0,"tableId":0,"actions": [{"maxLength":0,"port":19,"lengthU":8,"length":8,"type":"OUTPUT"}],"priority":0}, {"cookie":9007199254740992,"idleTimeout":5,"hardTimeout":0,"match":{"dataLayerDestination":"00:1f:29:32:72:b5", "dataLayerSource":"02:fc:91:ac:8d:d8","dataLayerType":"0x0800","dataLayerVirtualLan":-1, "dataLayerVirtualLanPriorityCodePoint":0,"inputPort":12,"networkDestination":"10.42.11.151","networkDestinationMaskLen":32, "networkProtocol":0,"networkSource":"10.42.11.33","networkSourceMaskLen":32,"networkTypeOfService":0,"transportDestination":0, "transportSource":0,"wildcards":3145952},"durationSeconds":842,"durationNanoseconds":179000000,"packetCount":836,"byteCount":0, "tableId":0,"actions":[{"maxLength":0,"port":19,"lengthU":8,"length":8,"type":"OUTPUT"}],"priority":0}, {"cookie":9007199254740992,"idleTimeout":5,"hardTimeout":0,"match":{"dataLayerDestination":"02:3a:2d:fc:da:7a", "dataLayerSource":"00:1f:29:32:72:b5","dataLayerType":"0x0800","dataLayerVirtualLan":-1, "dataLayerVirtualLanPriorityCodePoint":0,"inputPort":19,"networkDestination":"10.42.11.32","networkDestinationMaskLen":32, "networkProtocol":0,"networkSource":"10.42.11.151","networkSourceMaskLen":32,"networkTypeOfService":0,"transportDestination":0, "transportSource":0,"wildcards":3145952},"durationSeconds":842,"durationNanoseconds":500000000,"packetCount":836,"byteCount":0, "tableId":0,"actions":[{"maxLength":0,"port":10,"lengthU":8,"length":8,"type":"OUTPUT"}],"priority":0}, {"cookie":9007199254740992,"idleTimeout":5,"hardTimeout":0,"match":{"dataLayerDestination":"02:fc:91:ac:8d:d8", "dataLayerSource":"00:1f:29:32:72:b5","dataLayerType":"0x0800","dataLayerVirtualLan":-1,"dataLayerVirtualLanPriorityCodePoint":0, "inputPort":19,"networkDestination":"10.42.11.33","networkDestinationMaskLen":32,"networkProtocol":0,"networkSource":"10.42.11.151", "networkSourceMaskLen":32,"networkTypeOfService":0,"transportDestination":0,"transportSource":0,"wildcards":3145952}, "durationSeconds":841,"durationNanoseconds":277000000,"packetCount":837,"byteCount":0,"tableId":0,"actions": [{"maxLength":0,"port":12,"lengthU":8,"length":8,"type":"OUTPUT"}],"priority":0}
Inserted a flow modification, which was rejected traffic to the WAPG node pg51 (10.41.11.151).
$ curl -d '{"switch": "06:d6:00:24:a8:5d:0b:00","name":"flow-mod-1", "cookie":"0", "match":{"dataLayerDestination":"02:e9:c1:7d:03:c7","dataLayerSource":"02:43:26:66:f8:20","dataLayerType":"0x0800", "inputPort":7,"networkDestination":"10.42.11.37","networkDestinationMaskLen":32,"networkSource":"10.42.11.38","networkSourceMaskLen":32,"action":[{"port":7,"type":"OUTPUT"}] }' http://localhost:9090/wm/staticflowentrypusher/json {"success":false,"informational":false,"reasonPhrase":"Not Found","uri":"http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html#sec10.4.5","serverError":false,"connectorError":false,"clientError":true,"globalError":false,"redirection":false,"recoverableError":false,"name":"Not Found","error":true,"throwable":null,"description":"The server has not found anything matching the request URI","code":404} $ $ curl -X DELETE -d '{"switch": "06:d6:00:24:a8:5d:0b:00","name":"flow-mod-1", "cookie":"0", "match":{"dataLayerDestination":"02:e9:c1:7d:03:c7","dataLayerSource":"02:43:26:66:f8:20","dataLayerType":"0x0800", "inputPort":7,"networkDestination":"10.42.11.37","networkDestinationMaskLen":32,"networkSource":"10.42.11.38","networkSourceMaskLen":32,"action":[{"port":7,"type":"OUTPUT"}] }' http://localhost:9090/wm/staticflowentrypusher/json {"success":false,"informational":false,"reasonPhrase":"Not Found","uri":"http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html#sec10.4.5","serverError":false,"connectorError":false,"clientError":true,"globalError":false,"redirection":false,"recoverableError":false,"name":"Not Found","error":true,"throwable":null,"description":"The server has not found anything matching the request URI","code":404} $
27. Verify that traffic is delivered to target according to the flowmods settings
Unable to determine how to define a valid flow-mods??? Step incomplete!!!!!
28. Review baseline, GMOC, and monitoring statistics
Insert Iperf results here:
Reviewed the monitoring information available about this experiment, first found the sliver in the list of slices:
The selected the detail panel:
Then selected the sliver resources panel:
Also checked the sliver measurements:
29. Stop traffic and delete slivers
Stopped traffic, and deleted slivers.
As Expeirenter1:
$ omni.py -a pg deletesliver IG-EXP-5-exp1 $ omni.py -a of-rutgers deletesliver IG-EXP-5-exp1 -V1 $ omni.py -a of-ig deletesliver IG-EXP-5-exp1 -V1 $ omni.py -a of-i2 deletesliver IG-EXP-5-exp1 -V1 $ omni.py -a pg2 deletesliver IG-EXP-5-exp1a
As Expeirenter2:
$ omni.py -a pg deletesliver IG-EXP-5-exp2 $ omni.py -a of-clemson deletesliver IG-EXP-5-exp2 -V1 $ omni.py -a of-ig deletesliver IG-EXP-5-exp2 -V1 $ omni.py -a of-nlr deletesliver IG-EXP-5-exp2 -V1 $ omni.py -a plc-clemson deletesliver IG-EXP-5-exp2
Attachments (7)
- IG-EXP-5-exp1-sliver-detail-atGPO.jpg (266.8 KB) - added by 11 years ago.
- IG-EXP-5-exp1-slivers.jpg (745.8 KB) - added by 11 years ago.
- IG-EXP-5-exp1-stats.jpg (317.9 KB) - added by 11 years ago.
- IG-EXP-5-exp1.jpg (126.8 KB) - added by 11 years ago.
- IG-EXP-5-exp2-slivers.jpg (475.0 KB) - added by 11 years ago.
- IG-EXP-5-exp2.jpg (128.8 KB) - added by 11 years ago.
- IG-EXP-5-slices.jpg (156.4 KB) - added by 11 years ago.