wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-5

Version 13 (modified by lnevers@bbn.com, 11 years ago) (diff)

--

IG-EXP-5: InstaGENI Network Resources Acceptance Test

This page captures status for the test case IG-EXP-5, which verifies the ability to support OpenFlow operations and integration with meso-scale compute resources and other compute resources external to the InstaGENI rack. For overall status see the InstaGENI Acceptance Test Status page.

Test Status

This section captures the status for each step in the acceptance test plan.

Step State Ticket Comments
Step 1 Color(yellow,Complete)? Experiment modified to use Utah rack
Step 2 Color(yellow,Complete)?
Step 3 Color(yellow,Complete)?
Step 4 Color(yellow,Complete)?
Step 5 Color(yellow,Complete)?
Step 6 Color(yellow,Complete)?
Step 7 Color(yellow,Complete)?
Step 8 Color(yellow,Complete)?
Step 9 Color(yellow,Complete)?
Step 10 Color(yellow,Complete)?
Step 11 Color(yellow,Complete)?
Step 12 Color(yellow,Complete)?
Step 13 Color(#63B8FF,In Progress)? After GEC14
Step 14 Color(yellow,Complete)?
Step 15 Color(yellow,Complete)?
Step 16 Color(yellow,Complete)?
Step 17 Color(yellow,Complete)?
Step 18 Color(yellow,Complete)?
Step 19 Color(yellow,Complete)?
Step 20 Color(yellow,Complete)?
Step 21 Color(yellow,Complete)?
Step 22 Color(yellow,Complete)?
Step 23 Color(yellow,Complete)?
Step 24 Color(yellow,Complete)?
Step 25 Color(yellow,Complete)?
Step 26 Color(#63B8FF,In Progress)? After GEC14
Step 27 Color(#63B8FF,In Progress)? After GEC14
Step 28 Color(yellow,Complete)?
Step 29 Color(yellow,Complete)?


State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.


Test Plan Steps

Notes:

  1. All steps in this procedure are executed at Utah InstaGENI, not as originally planned at BBN.
  2. The initial run through combined all steps into one experiment rather than two.
  3. The following aggregate managers nick_names are define in the omni_config used for this test: 
ig=,http://utah.geniracks.net/protogeni/xmlrpc/am
pg=,http://www.emulab.net/protogeni/xmlrpc/am
pg2=,https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0
of-bbn=,https://foam.gpolab.bbn.com:3626/foam/gapi/1
of-clemson=,https://foam.clemson.edu:3626/foam/gapi/1
of-i2=,https://foam.net.internet2.edu:3626/foam/gapi/1
of-ig=,https://foam.utah.geniracks.net:3626/foam/gapi/1
of-rutgers=,https://nox.orbit-lab.org:3626/foam/gapi/1
plc-bbn=,http://myplc.gpolab.bbn.com:12346/
plc-clemson=,http://myplc.clemson.edu:12346/

1. As Experimenter1, Determine BBN compute resources and define RSpec

Collect list resources from InstaGENI compute and network aggregate managers. 

$ omni.py -a ig listresources IG-EXP-5 -o
$ omni.py -a pg listresources IG-EXP-5 -o
$ omni.py -a of-ig listresources IG-EXP-5 -o
$ omni.py -a of-i2 listresources IG-EXP-5 -o

2. Determine remote meso-scale compute resources and define RSpec

Rspec defined for the meso-scale sites, there are 3 meso-scale sites:

  • 1 WAPG node (pg51) at Rutgers Site via Internet2
  • 1 MyPLC node (planetlab4.clemson.edu) at Clemson Site via NLR
  • 1 MyPLC node (navis.gpolab.bbn.com) at BBN Site Via NLR

3. Define a request RSpec for OpenFlow network resources at the BBN InstaGENI AM

Defined the RSpec for the Utah OpenFlow switch in the ExoGENI rack to the core VLAN 3716. The following RSPec was used:

4. Define a request RSpec for OpenFlow network resources at the remote I2 Meso-scale site

An RSpec was defined for each site FOAM aggregate and compute resources aggregate. The following RSpec were used for the meso-scale sites:

5. Define a request RSpec for the OpenFlow Core resources

The OF core resources for VLAN 3716 were defined as follows:

6. Create the first slice

Created the first slice as with GPO ProtoGENI credentials: 

omni.py createslice IG-EXP-5

7. Create a sliver for the BBN compute resources

Created slivers at:

  • PG Utah compute resource aggregate 

omni.py -a pg createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-compute-pg.rspec

8. Create a sliver at the I2 meso-scale site using FOAM at site

Created a sliver at the Rutgers FOAM for VLAN 3716: 

 ./src/omni.py -a of-rutgers createsliver IG-EXP-5-scenario1 instarspec/IG-EXP-5-openflow-rutgers.rspec

9. Create a sliver at of the BBN InstaGENI AM

Created slivers at:

  • InstaGENI rack compute resource aggregate
  • InstaGENI rack FOAM network resource aggregate 

omni.py -a ig createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-compute-ig.rspec
omni.py -a of-ig createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-ig.rspec

To login to the compute resources above determine the following: 

omni.py -a ig sliverstatus IG-EXP-5 -o
egrep "hostname|port" IG-EXP-5-sliverstatus-utah-geniracks-net-protogeni.json

10. Create a sliver for the OpenFlow resources in the core

Created slivers at Internet2 and NLR FOAM network resource aggregate: 

omni.py -a of-i2 createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-i2.rspec 
omni.py -a of-nlr createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-nlr.rspec

10a. Create a sliver for all remaining Meso-scale compute and network resources

The following slivers were created: 

omni.py -a pg2 createsliver IG-EXP-5 --api-version 2 -t GENI 3./instarspec/IG-EXP-5/IG-EXP-5-wapg-rutgers.rspec
omni.py -a of-rutgers createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-rutgers.rspec 
omni.py -a plc-clemson createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-myplc-clemson.rspec 
omni.py -a of-clemson createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-clemson.rspec 
omni.py -a plc-bbn createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-myplc-bbn.rspec
omni.py -a of-bbn createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-bbn.rspec

11. Log in to each of the compute resources and send traffic to the other end-point

The nodes assigned for compute resources were determined as follows: 

omni.py -a ig sliverstatus IG-EXP-5 -o
omni.py -a of-ig sliverstatus IG-EXP-5 -o
omni.py -a of-i2 sliverstatus IG-EXP-5 -o
omni.py -a pg2  sliverstatus IG-EXP-5 -o
omni.py -a plc-clemson  sliverstatus IG-EXP-5 -o
omni.py -a plc-bbn  sliverstatus IG-EXP-5 -o

The above created output files named IG-EXP-5-sliverstatus-SITENAME.json from which the assigned hosts can be determined: 

egrep "hostname" IG-EXP-5-sliverstatus-SITENAME.json

For this experiment, local PG resources were also configured to be allowed on VLAN 1750 thorough the InstaGENI rack, the following sliver was created: 

omni.py -a pg createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-compute-pg.rspec

To login to this resource, determined access details as follows: 

omni.py -a pg sliverstatus IG-EXP-5 -o
egrep "hostname|port" IG-EXP-5-sliverstatus-utah-geniracks-net-protogeni.json

12. Verify that traffic is delivered to target

Ping traffic was successfully exchange between each compute resource reserved,

13. Review baseline, GMOC, and meso-scale monitoring statistics

No monitoring data available for InstaGENI rack at this time. Will revisit after GEC14.

14. As Experimenter2, determine BBN compute resources and define RSpec

Note: for initial run through of this test only one set of credentials were used

15. Determine remote meso-scale NLR compute resources and define RSpec

NLR OpenFlow Rspec was defined in step 5.

16. Define a request RSpec for OpenFlow network resources at the BBN InstaGENI AM

For the initial run which combined the two experiments, these steps were completed above in step 9.

17. Define a request RSpec for OpenFlow network resources at the remote NLR Meso-scale site

18. Define a request RSpec for the OpenFlow Core resources

Created sliver at NLR and Internet2 FOAM network resource aggregates: 

omni.py -a of-i2 createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-i2.rspec 
omni.py -a of-nlr createsliver IG-EXP-5 ./instarspec/IG-EXP-5/IG-EXP-5-openflow-nlr.rspec

19. Create the second slice

For the initial run which combined the two experiments, there is no second slice.

20. Create a sliver for the BBN compute resources

See step 10a.

21. Create a sliver at the meso-scale site using FOAM at site

See step 10a.

22. Create a sliver at of the BBN InstaGENI AM

See step 9.

23. Create a sliver for the OpenFlow resources in the core

See step 10.

24. Create a sliver for the meso-scale compute resources

See step 10a.

25. Log in to each of the compute resources and send traffic to the other endpoint

Was able to exchange ping traffic between each of the compute resources.

26. As Experimenter2, insert flowmods and send packet-outs only for traffic assigned to the slivers

Nox controller with support for flow-mods available after GEC14.

27. Verify that traffic is delivered to target according to the flowmods settings

See step 26.

28. Review baseline, GMOC, and monitoring statistics

Reviewed the monitoring information available about this experiment:

29. Stop traffic and delete slivers

Stopped traffic to review statistics, but did not delete slivers, trying to run experiment as long as possible before GEC14.

Attachments (7)