Version 4 (modified by, 8 years ago) (diff)


EG-EXP-2: InstaGENI Single Site Acceptance Test

This page captures status for the test case EG-EXP-2, which verifies basic operations of VMs and data flows within one rack. For overall status see the InstaGENI Acceptance Test Status page.

Test Status

This section captures the status for each step in the acceptance test plan.

Step State Date completed Ticket Comments
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Step 18
Step 19
Step 20
State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color( #98FB98, #100000 , Pass)? Test completed and met most criteria. Exceptions documented
Color( #F0FFF0, #100000 , Complete)? Test completed but requiring re-execution due to expected changes
Color( #B0E0E6, #100000 , Complete)? Test completed with workaround for ticketed issue(s)
Color(#CAE1FF,Workaround)? Test in progress with workaround for ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.
Color(red,Fail)? Test completed and failed to meet criteria.
Color(orange,Blocked)? Blocked by ticketed issue(s).


Status for test prerequisites:

Prereq: InstaGENI makes available at least two Linux distributions and a FreeBSD image as stated in design document

Status: Done

Prereq: Two GPO customized Ubuntu image snapshots are available and have been manually uploaded by the rack administrator using available InstaGENI documentation. One Ubuntu image is for the VM and one Ubuntu image is for the physical node in this test.

Status: Need to talk to Peter about creating images.

Prereq: Traffic generation tools may be part of image or may be installed at experiment runtime.

Status: Only using ping with mixed sizes and rates for now.

Prereq: Administrative accounts have been created for GPO staff on the Utah InstaGENI rack.

Status: Done

Prereq: GENI Experimenter1 and Experimenter2 accounts exist.

Status: Two account already exist, and, these will be used in all acceptance tests.

Prereq: Baseline Monitoring is in place for the entire Utah site, to ensure that any problems are quickly identified.

Status: Blocked on prerequisite tests completion.

Test Plan Steps

  1. As Experimenter1, request ListResources from Utah InstaGENI.
  2. Review advertisement RSpec for a list of OS images which can be loaded, and identify available resources.
  3. Verify that the GPO Ubuntu customized image is available in the advertisement RSpec.
  4. Define a request RSpec for two VMs, each with a GPO Ubuntu image. Request a publically routable IP address and public TCP/UDP port mapping for the control interface on each node.
  5. Create the first slice.
  6. Create a sliver in the first slice, using the RSpec defined in step 4.
  7. Log in to each of the systems, and send traffic to the other system sharing a VLAN.
  8. Using root privileges on one of the VMs load a Kernel module. It is expected this will not work on shared OpenVZ nodes, testing will proceed past this step.
  9. Run a netcat listener and bind to port XYZ on each of the VMs in the Utah rack.
  10. Send traffic to port XYZ on each of the VMs in the Utah rack over the control network from any commodity Internet host.
  11. As Experimenter2, request ListResources from Utah InstaGENI.
  12. Define a request RSpec for two physical nodes, both using the uploaded GPO Ubuntu images.
  13. Create the second slice.
  14. Create a sliver in the second slice, using the RSpec defined in step 12.
  15. Log in to each of the systems, and send traffic to the other system.
  16. Verify that experimenters 1 and 2 cannot use the control plane to access each other's resources (e.g. via unauthenticated SSH, shared writable filesystem mount)
  17. Review system statistics and VM isolation and network isolation on data plane.
  18. Verify that each VM has a distinct MAC address for that interface.
  19. Verify that VMs' MAC addresses are learned on the data plane switch.
  20. Stop traffic and delete slivers.