wiki:GENIRacksHome/InstageniRacks/AcceptanceTestStatus/IG-EXP-1

Version 35 (modified by lnevers@bbn.com, 7 years ago) (diff)

--

IG-EXP-1: Bare Metal Support Acceptance Test

This page captures status for the test case IG-EXP-1, which verified support for bare metal nodes. For overall status see the ExoGENI Acceptance Test Status page.

Last update: 2013/01/24

Test Status

This section captures the status for each step in the acceptance test plan.

Step State Ticket Notes
Step 1 Color(green,Pass)?
Step 2 Color(red,Fail)? instaticket:13 Windows not supported.
Step 3 Color(red,Fail)? Windows not supported.
Step 4 Color(green,Pass)?
Step 5 Color(green,Pass)?
Step 6 Color(green,Pass)?
Step 7


State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.


Test Plan Steps

A nick_name alias is used for the GPO InstaGENI aggregate manager in the omni_config:

ig-gpo=,http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0

GPO ProtoGENI user credentials for lnevers@bbn.com were used for Experimenter1.

Step 1. Determine which nodes can be used as exclusive nodes

Able to determine which node are exclusive and if they are available via Omni listresources. ListResources obtained with the following Omni command:

 $ omni.py -a ig-gpo listresources --available -o

Step 2. Obtain 2 licensed recent Microsoft OS images for physical nodes from the site (BBN)

Windows is not supported. Need to get InstaGENI folks to document the non-support of MS Windows and cleanup of windows references (ticket 13).

Step 3. Reserve and boot 2 physical nodes using Microsoft image

MS Windows is not verified (ticket 13) According to email from Leigh, this is very time intensive and would require weeks. Also Windows XP instructions existed, but have since been removed.

Step 4. Obtain a recent Linux OS image for physical nodes from the InstaGENI list

Have requested the list of currently supported OS by InstaGENI. Initially only Standard 32-bit Fedora 15 image was available, two images have been added to the list of available OS in the Utah InstaGENI rack (ticket 13). Tested each images made available to experimenters, by setting up a 2 raw pc with 1 lan experiment for each image and attached Rspec:

  • FreeBSD 8.2 32-bit version
  • Standard 64-bit Ubuntu 12.04 image
  • Standard 32-bit Fedora 15 image (default)

Command used to determine images:

 $ $ omni.py -a ig-gpo listresources --available -o
 $ egrep "node component|disk_image|available" rspec-instageni-gpolab-bbn-com-protogeniv2.xml 
 <...>
 <node component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+pc4" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" component_name="pc4" exclusive="true">    
      <disk_image default="true" description="Standard 32-bit Fedora 15 image" name="urn:publicid:IDN+instageni.gpolab.bbn.com+image+emulab-ops:FEDORA15-STD" os="Fedora" version="15"/>      
      <disk_image description="FreeBSD 8.2 32-bit version" name="urn:publicid:IDN+instageni.gpolab.bbn.com+image+emulab-ops:FBSD82-STD" os="FreeBSD" version="8.2"/>      
      <disk_image description="Ubuntu 12.04 LTS" name="urn:publicid:IDN+instageni.gpolab.bbn.com+image+emulab-ops:UBUNTU12-64-STD" os="Linux" version=""/>      
      <disk_image default="true" description="Standard 32-bit Fedora 15 image" name="urn:publicid:IDN+instageni.gpolab.bbn.com+image+emulab-ops:FEDORA15-STD" os="Fedora" version="15"/>      
      <disk_image description="Generic osid for openvz virtual nodes." name="urn:publicid:IDN+instageni.gpolab.bbn.com+image+emulab-ops:OPENVZ-STD" os="Fedora" version="15"/>      
      <available now="true"/>    

}}}

Step 5. Reserve and boot physical node using each loading a different Linux OS image

The RSpec IG-EXP-1-gpo.rspec that includes 1 FreeBSD and 1 Ubuntu node was used to create a slice and sliver at the GPO InstaGENI:

$ omni.py createslice IG-EXP-1 
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Created slice with Name IG-EXP-1, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-1, Expiration 2013-01-25 21:04:16+00:00
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createslice:
  Options as run:
		framework: pg

  Args: createslice IG-EXP-1
  Result Summary: Created slice with Name IG-EXP-1, URN urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-1, Expiration 2013-01-25 21:04:16+00:00
 
INFO:omni: ============================================================
$ omni.py createsliver -a ig-gpo IG-EXP-1 IG-EXP-1-gpo.rspec 
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-1 expires on 2013-01-25 21:04:16 UTC
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Creating sliver(s) from rspec file IG-EXP-1-gpo.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-1
INFO:omni:Got return from CreateSliver for slice IG-EXP-1 at http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0:
INFO:omni:<!-- Reserved resources for:
	Slice: IG-EXP-1
	at AM:
	URN: unspecified_AM_URN
	URL: http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0
 -->
INFO:omni:<rspec xmlns="http://www.geni.net/resources/rspec/3" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" type="manifest" xsi:schemaLocation="http://www.geni.net/resources/rspec/3   http://www.geni.net/resources/rspec/3/manifest.xsd">  

  <node client_id="host-bsd" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" exclusive="true" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+pc4" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+847">
    <sliver_type name="raw-pc">
    <disk_image description="FreeBSD 8.2 32-bit version" name="urn:publicid:IDN+instageni.gpolab.bbn.com+image+emulab-ops:FBSD82-STD" os="FreeBSD" version="8.2"/>
    </sliver_type>
    <interface client_id="host-bsd:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc4:eth1" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+851" mac_address="10604B9600D6">
    <ip address="10.10.1.2" type="ipv4"/></interface>
  <rs:vnode xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1" name="pc4"/><host name="host-bsd.IG-EXP-1.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com"/><services><login authentication="ssh-keys" hostname="pc4.instageni.gpolab.bbn.com" port="22" username="lnevers"/></services></node>

  <node client_id="host-ubuntu12" component_manager_id="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm" exclusive="true" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+node+pc5" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+846">
    <sliver_type name="raw-pc">
      <disk_image description="Ubuntu 12.04 LTS" name="urn:publicid:IDN+instageni.gpolab.bbn.com+image+emulab-ops:UBUNTU12-64-STD" os="Linux" version=""/>
    </sliver_type>
    <interface client_id="host-ubuntu12:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc5:eth1" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+850" mac_address="10604B9C476A">
    <ip address="10.10.1.1" type="ipv4"/></interface>
  <rs:vnode xmlns:rs="http://www.protogeni.net/resources/rspec/ext/emulab/1" name="pc5"/><host name="host-ubuntu12.IG-EXP-1.pgeni-gpolab-bbn-com.instageni.gpolab.bbn.com"/><services><login authentication="ssh-keys" hostname="pc5.instageni.gpolab.bbn.com" port="22" username="lnevers"/></services></node>

  <link client_id="lan0" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+849" vlantag="258">
    <component_manager name="urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm"/>
    <interface_ref client_id="host-ubuntu12:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc5:eth1" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+850"/>
    <interface_ref client_id="host-bsd:if0" component_id="urn:publicid:IDN+instageni.gpolab.bbn.com+interface+pc4:eth1" sliver_id="urn:publicid:IDN+instageni.gpolab.bbn.com+sliver+851"/>
    <link_type name="lan"/>
  </link>
</rspec>
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed createsliver:
  Options as run:
		aggregate: ['ig-gpo']
		framework: pg

  Args: createsliver IG-EXP-1 IG-EXP-1-gpo.rspec
  Result Summary: Got Reserved resources RSpec from instageni-gpolab-bbn-com-protogeniv2 
INFO:omni: ============================================================

Note: A version of the RSpec IG-EXP-1-utah.rspec is available for IG Utah rack.

Once sliver is ready, determined the login information for the sliver EG-EXP-1 nodes:

$ readyToLogin.py -a ig-gpo IG-EXP-1 
<...>
host-ubuntu12's geni_status is: changing (am_status:ready) 
User lnevers logins to host-ubuntu12 using:
	xterm -e ssh -i /home/lnevers/.ssh/id_rsa lnevers@pc5.instageni.gpolab.bbn.com &

host-bsd's geni_status is: ready (am_status:ready) 
User lnevers logins to host-bsd using:
	xterm -e ssh -i /home/lnevers/.ssh/id_rsa lnevers@pc4.instageni.gpolab.bbn.com &

Verified dataplane connectivity for each host in each experiment. Checked the FreeBSD host:

 $ ssh -i /home/lnevers/.ssh/id_rsa lnevers@pc4.instageni.gpolab.bbn.com 
 [lnevers@host-bsd ~]$ /sbin/ifconfig bce1
  bce1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
        ether 10:60:4b:96:00:d6
        inet 10.10.1.2 netmask 0xffffff00 broadcast 10.10.1.255
        media: Ethernet 1000baseT <full-duplex>
        status: active
 [lnevers@host-bsd ~]$ ping 10.10.1.1
PING 10.10.1.1 (10.10.1.1): 56 data bytes
64 bytes from 10.10.1.1: icmp_seq=0 ttl=64 time=0.233 ms
64 bytes from 10.10.1.1: icmp_seq=1 ttl=64 time=0.110 ms

Checked the Ubuntu host:

lnevers@localhost:~$ /sbin/ifconfig eth1
eth1      Link encap:Ethernet  HWaddr 10:60:4b:9c:47:6a  
          inet addr:10.10.1.1  Bcast:10.10.1.255  Mask:255.255.255.0
          inet6 addr: fe80::1260:4bff:fe9c:476a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:492 (492.0 B)
          Interrupt:37 Memory:f2000000-f2012800 

lnevers@localhost:~$ ping 10.10.1.2
PING 10.10.1.2 (10.10.1.2) 56(84) bytes of data.
64 bytes from 10.10.1.2: icmp_req=1 ttl=64 time=0.103 ms
64 bytes from 10.10.1.2: icmp_req=2 ttl=64 time=0.091 ms

Step 6. Release physical node resource

Released the sliver compute resources:

$ omni.py deletesliver -a ig-gpo IG-EXP-1 
INFO:omni:Loading config file /home/lnevers/.gcf/omni_config
INFO:omni:Using control framework pg
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-1 expires on 2013-01-25 21:04:16 UTC
INFO:omni:Substituting AM nickname ig-gpo with URL http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0, URN unspecified_AM_URN
INFO:omni:Deleted sliver urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-1 on unspecified_AM_URN at http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0
INFO:omni: ------------------------------------------------------------
INFO:omni: Completed deletesliver:
  Options as run:
		aggregate: ['ig-gpo']
		framework: pg

  Args: deletesliver IG-EXP-1
  Result Summary: Deleted sliver urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+IG-EXP-1 on unspecified_AM_URN at http://instageni.gpolab.bbn.com/protogeni/xmlrpc/am/2.0 
INFO:omni: ============================================================

Step 7. Modify Aggregate resource allocation for the rack to add 1 additional physical node

Attachments (1)

Download all attachments as: .zip