Version 8 (modified by 12 years ago) (diff) | ,
---|
EG-EXP-6: ExoGENI and Meso-scale Multi-site OpenFlow Acceptance Test
This page captures status for the test case EG-EXP-6, which verifies ExoGENI rack interoperability with other meso-scale GENI sites. For overall status see the ExoGENI Acceptance Test Status page.
Test Status
This section captures the status for each step in the acceptance test plan.
Step | State | Date completed | Ticket | Comments |
Step 1 | ||||
Step 2 | ||||
Step 3 | ||||
Step 4 | ||||
Step 5 | ||||
Step 6 | ||||
Step 7 | ||||
Step 8 | ||||
Step 9 | ||||
Step 10 | ||||
Step 11 | ||||
Step 12 | ||||
Step 13 | ||||
Step 14 | ||||
Step 15 | ||||
Step 16 | ||||
Step 17 | ||||
Step 18 | ||||
Step 19 | ||||
Step 20 | ||||
Step 21 | ||||
Step 22 | ||||
Step 23 | ||||
Step 24 | ||||
Step 25 | ||||
Step 26 | ||||
Step 27 | ||||
Step 28 | ||||
Step 29 | ||||
Step 30 | ||||
Step 31 | ||||
Step 32 | ||||
Step 33 | ||||
Step 34 | ||||
Step 35 | ||||
Step 36 | ||||
Step 37 |
State Legend | Description |
Color(green,Pass)? | Test completed and met all criteria |
Color(#98FB98,Pass: most criteria)? | Test completed and met most criteria. Exceptions documented |
Color(red,Fail)? | Test completed and failed to meet criteria. |
Color(yellow,Complete)? | Test completed but will require re-execution due to expected changes |
Color(orange,Blocked)? | Blocked by ticketed issue(s). |
Color(#63B8FF,In Progress)? | Currently under test. |
Test Plan Steps
Parts of this test were completed on July 2, 2012.
The pgeni.gpolab.bbn.com slice authority is used for the credentials and the following aggregate manager nick_names were defined in the omni_config:
#ExoGENI Compute and OF Aggregates Managers exobbn=,https://bbn-hn.exogeni.net:11443/orca/xmlrpc exorci=,https://rci-hn.exogeni.net:11443/orca/xmlrpc exosm=,https://geni.renci.org:11443/orca/xmlrpc of-exobbn=,https://bbn-hn.exogeni.net:3626/foam/gapi/1 of-exorci=,https://rci-hn.exogeni.net:3626/foam/gapi/1 #Meso-scale Compute and OF Aggregates Managers of-bbn=,https://foam.gpolab.bbn.com:3626/foam/gapi/1 of-clemson=,https://foam.clemson.edu:3626/foam/gapi/1 of-i2=,https://foam.net.internet2.edu:3626/foam/gapi/1 of-rutgers=,https://nox.orbit-lab.org:3626/foam/gapi/1 plc-bbn=,http://myplc.gpolab.bbn.com:12346/ plc-clemson=,http://myplc.clemson.edu:12346/
1. As Experimenter1, request ListResources from BBN ExoGENI, RENCI ExoGENI, and FOAM at NLR Site.
Requested listresources from each of the FOAM aggregates:
$ omni.py listresources -a of-exobbn -o $ omni.py listresources -a of-bbn -o $ omni.py listresources -a of-nlr -o $ omni.py listresources -a of-i2 -o $ omni.py listresources -a of-exorci -o
2. Review ListResources output from all AMs
Requested listresources from each of the GENI AM aggregates:
$ omni.py listresources -a plc-bbn $ omni.py listresources -a plc-clemson $ omni.py listresources -a pg2 $ omni.py listresources -a exobbn $ omni.py listresources -a exorci
3. Define a request RSpec for a VM at the BBN ExoGENI.
Define an RSpec for one VM on the Shared VLAN 1750. [Insert link here]
4. Define a request RSpec for a VM at the RENCI ExoGENI.
Define an RSpec for one VM on the Shared VLAN 1750. [Insert link here]
- Define request RSpecs for OpenFlow resources from BBN FOAM to access GENI OpenFlow core resources.
- Define request RSpecs for OpenFlow core resources at NLR FOAM.
- Create the first slice.
- Create a sliver in the first slice at each AM, using the RSpecs defined above.
- Log in to each of the systems, verify IP address assignment. Send traffic to the other system, leave traffic running.
- As Experimenter2, define a request RSpec for one VM and one bare metal node at BBN ExoGENI.
- Define a request RSpec for two VMs on the same worker node at RENCI ExoGENI.
- Define request RSpecs for OpenFlow resources from GPO FOAM to access GENI OpenFlow core resources.
- Define request RSpecs for OpenFlow core resources at NLR FOAM.
- Create a second slice.
- Create a sliver in the second slice at each AM, using the RSpecs defined above.
- Log in to each of the systems in the slice, and send traffic to each other systems; leave traffic running
- As Experimenter3, request ListResources from BBN ExoGENI, GPO FOAM, and FOAM at Meso-scale Site (NLR Site GPO and Internet2 site TBD).
- Review ListResources output from all AMs.
- Define a request RSpec for a VM at the BBN ExoGENI.
- Define a request RSpec for a compute resource at the GPO Meso-scale site.
- Define a request RSpec for a compute resource at a Meso-scale site.
- Define request RSpecs for OpenFlow resources to allow connection from OF BBN ExoGENI to Meso-scale OF sites(GPO and second site TBD) (NLR and I2).
- Create a third slice.
- Create a sliver that connects the Internet2 Meso-scale OpenFlow site to the BBN ExoGENI Site, and the GPO Meso-scale site.
- Log in to each of the compute resources in the slice, configure data plane network interfaces on any non-ExoGENI resources as necessary, and send traffic to each other systems; leave traffic running.
- Verify that all three experiments continue to run without impacting each other's traffic, and that data is exchanged over the path along which data is supposed to flow.
- Review baseline, GMOC, and monitoring statistics.
- As site administrator, identify all controllers that the BBN ExoGENI OpenFlow switch is connected to
- As Experimenter3, verify that traffic only flows on the network resources assigned to slivers as specified by the controller.
- Verify that no default controller, switch fail-open behavior, or other resource other than experimenters' controllers, can control how traffic flows on network resources assigned to experimenters' slivers.
- Set the hard and soft timeout of flowtable entries
- Get switch statistics and flowtable entries for slivers from the OpenFlow switch.
- Get layer 2 topology information about slivers in each slice.
- Install flows that match on layer 2 fields and/or layer 3 fields.
- Run test for at least 4 hours.
- Review monitoring statistics and checks as above.
- Stop traffic and delete slivers.