Version 10 (modified by 12 years ago) (diff) | ,
---|
EG-EXP-4: ExoGENI Multi-site Acceptance Test
This page captures status for the test case EG-EXP-4, which verifies the ability to support basic operations of VMs and data flows between two racks. For overall status see the ExoGENI Acceptance Test Status page.
Test Status
This section captures the status for each step in the acceptance test plan.
Step | State | Date completed | Ticket | Comments |
Step 1 | ||||
Step 2 | ||||
Step 3 | ||||
Step 4 | ||||
Step 5 | ||||
Step 6 | ||||
Step 7 | ||||
Step 8 | ||||
Step 9 | ||||
Step 10 | ||||
Step 11 | ||||
Step 12 | ||||
Step 13 | ||||
Step 14 | ||||
Step 15 | ||||
Step 16 | ||||
Step 17 |
State Legend | Description |
Color(green,Pass)? | Test completed and met all criteria |
Color(#98FB98,Pass: most criteria)? | Test completed and met most criteria. Exceptions documented |
Color(red,Fail)? | Test completed and failed to meet criteria. |
Color(yellow,Complete)? | Test completed but will require re-execution due to expected changes |
Color(orange,Blocked)? | Blocked by ticketed issue(s). |
Color(#63B8FF,In Progress)? | Currently under test. |
Test Plan Steps
In the steps below the following nicknames are used:
exo-bbn=,https://bbn-hn.exogeni.net:11443/orca/xmlrpc exo-rci=,https://rci-hn.exogeni.net:11443/orca/xmlrpc exosm=,https://geni.renci.org:11443/orca/xmlrpc
Step 1. As Experimenter1, Request ListResources RENCI ExoGENI
$ ./src/omni.py -a exo-rci listresources -o
Step 2. Review ListResources output
Reviewed content of output file named rspec-rci-hn-exogeni-net-11443-orca.xml.
Step 3. Define a request RSpec
Define a request RSpec for a VM at BBN ExoGENI, a VM at RENCI ExoGENI and an unbound exclusive non-OpenFlow VLAN to connect the 2 endpoints.
Step 4. Create the first slice.
Step 5. Create a sliver at the RENCI ExoGENI aggregate using the RSpecs defined above
Step 6. Log in to each of the systems, and send traffic to the other system, leave traffic running
Step 7. As Experimenter2, Request ListResources from RENCI ExoGENI
Step 8. Define a request RSpec =
Full step description: "Define a request RSpec for one VM and one bare metal node each with two interfaces in the BBN ExoGENI rack, two VMs at RENCI, and two VLANs to connect the BBN ExoGENI to the RENCI ExoGENI."