wiki:GENIRacksHome/ExogeniRacks/AcceptanceTestStatus/EG-EXP-1

Version 7 (modified by lnevers@bbn.com, 8 years ago) (diff)

--

EG-EXP-1: Bare Metal Support Acceptance Test

This page captures status for the test case EG-EXP-1, which verified support for bare metal nodes. For overall status see the ExoGENI Acceptance Test Status page.

Test Status

This section captures the status for each step in the acceptance test plan.

Step State Date completed Ticket Comments
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color( #98FB98, #100000 , Pass)? Test completed and met most criteria. Exceptions documented
Color( #F0FFF0, #100000 , Complete)? Test completed but requiring re-execution due to expected changes
Color( #B0E0E6, #100000 , Complete)? Test completed with workaround for ticketed issue(s)
Color(#CAE1FF,Workaround)? Test in progress with workaround for ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.
Color(red,Fail)? Test completed and failed to meet criteria.
Color(orange,Blocked)? Blocked by ticketed issue(s).

Test Plan Steps

  1. Determine which nodes can be used as bare metal, aka exclusive node.
  2. Obtain a list of OS images which can be loaded on bare metal nodes from the ExoGENI team. (List should be based on successful bare metal loads by ExoGENI team or others in GENI community and should be available on a public web page.)
  3. Obtain 2 licensed recent Microsoft OS images for bare metal nodes from the site (BBN).
  4. Reserve and boot 2 bare metal node using the Microsoft image.
  5. Obtain a recent Linux OS image for bare metal nodes from the ExoGENI team's successful test list.
  6. Reserve and boot a bare metal node using this Linux OS image.
  7. Release bare metal resource.
  8. Modify Aggregate resource allocation for the rack to add 1 additional bare metal node (2 total) for use in experimenter test cases.