Version 17 (modified by, 10 years ago) (diff)


EG-EXP-1: Bare Metal Support Acceptance Test

This page captures status for the test case EG-EXP-1, which verified support for bare metal nodes. For overall status see the ExoGENI Acceptance Test Status page.

Test Status

This section captures the status for each step in the acceptance test plan.

Step State Date completed Ticket Comments
Step 1 Color(#63B8FF,In Progress)? 1 Bare Metal is available at BBN and 1 at RENCI
Step 2
Step 3 Replace Bare metal with VM for Windows
Step 4 Replace Bare metal with VM for Windows
Step 5
Step 6 Bare Metal Support available
Step 7
Step 8

State Legend Description
Color(green,Pass)? Test completed and met all criteria
Color(#98FB98,Pass: most criteria)? Test completed and met most criteria. Exceptions documented
Color(red,Fail)? Test completed and failed to meet criteria.
Color(yellow,Complete)? Test completed but will require re-execution due to expected changes
Color(orange,Blocked)? Blocked by ticketed issue(s).
Color(#63B8FF,In Progress)? Currently under test.

Test Plan Steps


  1. Bare Metal nodes are available via EXoSM only.
  2. Bare Metal node only support one version at this time.
  3. 1 Bare metal at BBN and 1 at RENCI.

Step 1. Determine which nodes can be used as bare metal, aka exclusive node

Note that the omni_configuration includes a nick_name for the ExoSM:


Determine available bare metal resources from the ExoSM.

$ cd ..;./src/ listresources -a exosm -o

The listresource output file rspec-geni-renci-org-11443-orca.xml lists the bare metal resources at the two sites BBN and RENCI:

$ egrep baremetal rspec-geni-renci-org-11443-orca.xml 
      <node component_id="" component_manager_id="" component_name="bbnvmsite.rdf#bbnvmsite/Domain/baremetalce" exclusive="false">    
      <node component_id="" component_manager_id="" component_name="rcivmsite.rdf#rcivmsite/Domain/baremetalce" exclusive="false">    

Verify that each is available before requesting the node.

Step 2. Obtain a list of OS images which can be loaded on bare metal nodes from the ExoGENI team.

The list should be based on successful bare metal loads by ExoGENI team or others in GENI community and should be available on a public web page.

At the time of feature delivery, only supports one image.

Step 3. Obtain 2 licensed recent Microsoft OS images for bare metal nodes from the site (BBN)

There is no plan to support MS Windows on a bare metal node, this test will replace bare metal Windows with a Windows VM in future test runs.

Step 4. Reserve and boot 2 bare metal node using the Microsoft image.

There is no plan to support MS Windows on a bare metal node, this test will replace bare metal Windows with a Windows VM in future test runs.

Step 5. Obtain a recent Linux OS image for bare metal nodes from the ExoGENI team's successful test list

The bare metal nodes only support one image at this time. The default image is the one used to develop the support for this feature.

Step 6. Reserve and boot a bare metal node using this Linux OS image.

$ createslice 2bare
$ -a exosm createsliver 2bare EG-EXP-1-2baremetal
$ -a exosm sliverstatus 2bare

Once the sliver is ready determine the addresses associated with the sliver:

$ -a exosm listresources 2bare -o 
$ egrep hostname 2bare-rspec-geni-renci-org-11443-orca.xml

Step 7. Release bare metal resource.

Once traffic is exchanged successfully between the two bare metal nodes, delete the sliver:

$ -a exosm deletesliver 2bare

Step 8. Modify Aggregate resource allocation for the rack to add 1 additional bare metal node (2 total) for use in experimenter test cases.

Not possible at this time.