Changes between Version 4 and Version 5 of GENIExperimenter/Tutorials/iMinds/GettingStarted_PartII_ccn/Procedure/Setup


Ignore:
Timestamp:
07/05/14 16:09:49 (10 years ago)
Author:
Vic Thomas
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIExperimenter/Tutorials/iMinds/GettingStarted_PartII_ccn/Procedure/Setup

    v4 v5  
    6161  <td>
    6262     <img border="0"
    63         src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/PortalOmniExample/ObtainResources/flack-import-small.png?format=raw"
     63        src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/iMinds/GettingStarted_PartII_ccn/Procedure/Setup/jFed-openURL.jpg?format=raw"
    6464        alt="Import an RSpec into jFed"  title="Import an RSpec into jFed" />
    6565     <br />
    6666     <b>Figure 3-1</b> <i>Import an RSpec into jFed.</i>
    6767  </td>
    68 </tr>
    69 </table>
    70 <table>
    71 <tr><td>
    72   <ol type='a' start='3'>
    73     <li>Enter the URL for the RSpec: <br>
    74        <tt> http://www.gpolab.bbn.com/experiment-support/ccnx/ccn_precip_openvz_gec20.xml </tt> <br>
    75     then click <b>Ok</b>.<br/>
    76     </li>
    77     <li>When Flack pops up a message asking you to pick a manager to use click <b>OK</b> and then select the manager listed on your worksheet from the
    78     list.  After you click <b>Accept</b>, and a network topology should appear
    79     on the canvas.
    80 
    81 
    82 <table id="Table_01" border="0" cellpadding="5" cellspacing="0">
    83         <tr>
    84                 <td>
    85                         <img src="http://trac.gpolab.bbn.com/gcf/raw-attachment/wiki/Graphics/4NotesIcon_512x512.png" width="50" height="50" alt="Note">
    86                </td>
    87 <td>
    88 Because this RSpec file contains a generic description of resources and does not specify any particular aggregate manager, Flack will pop up a message asking you to specify an aggregate to use:
    89 <br/>
    90 <i>
    91 There were resources detected without a manager selected, please select which manager you would like to use.
    92 </i>
    93 </td>
    94         </tr>
    95 </table>
    96 
    97     </li>
    98   </ol>
    99 </td>
    100 
    101 
    102 </tr></table>
    103 }}}
     68  </tr>
     69  <tr>
     70  <td>
     71  <ol type='a' start='4'>
     72      <li> You should see a 4-node linear topology.  Double-click on each node to make sure you are using the aggregate assigned to you (<tt> iMinds Virtual Wall 1 </tt> or <tt> iMinds Virtual Wall 2 </tt>.  If needed, change the aggregate from the drop-down list and click Save.  <b> Do this for all nodes </b> </li>
     73   </ol>
     74   </td>
     75   <td>
     76     <img border="0"
     77        src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/iMinds/GettingStarted_PartII_ccn/Procedure/Setup/jFed-openURL.jpg?format=raw"
     78        alt="Import an RSpec into jFed"  title="Import an RSpec into jFed" />
     79     <br />
     80     <b>Figure 3-1</b> <i>Make sure resource is being requested from the correct aggregate.</i>
     81  </td>
     82  </tr>
     83</table>
     84
    10485
    10586=== 3.3. Modify the RSpec to automatically install and execute CCNX software ===