[[PageOutline]] = IPv4 Routing Assignment = {{{ #!html
Overview:In this experiment you will learn how to set up static routing with the route command. We will use the following network topology for this experiment: |
|
Prerequisites:For this tutorial you need :
|
Tools:All the tools will already be installed at your nodes. For your reference we are going to use: |
|
Where to get help:For any questions or problem with the tutorial ask your TA or Professor for help. If you are doing this exercise outside the context of a course, please email help@geni.net |
1. Verify your Environment Setup:This exercise assumes you have already setup your account at the GENI Portal. In particular ensure that:
2. Setup the Topology:
|
3. Setup the routingThe goal of this exercise is to setup the routing as indicated in Figure 1; i.e. packets from A send to IP address 192.168.2.12 on node C should be routed via node B. In order to create this routing behavior you will need to modify the routing tables in your nodes using the linux
|
|
Step 5: Cleanup experiment:After you are done with your experiment, you should always release your resources so that other experimenters can use the resources. In order to cleanup your slice :
|