113 | | [[BR]][[BR]][[BR]] |
114 | | |
115 | | |
| 113 | |
| 114 | [[BR]][[BR]][[BR]] |
| 115 | |
| 116 | = MAX = |
| 117 | [[PageOutline]] |
| 118 | |
| 119 | == Reaching MAX == |
| 120 | [[BR]][[BR]] |
| 121 | == Equipment == |
| 122 | A typical MAX node (from MAX's GENI wiki):[[BR]] |
| 123 | [[Image(typical-dragon-node-diagram.png,width=300)]] [[Image(typical-dragon-node-equipment.png,width=300)]] |
| 124 | |
| 125 | MAX is connected to ProtoGENI as shown in the following diagram (thanks to Chris Tracy for the diagram):[[BR]] |
| 126 | [[Image(MAX2ProtoATWash.jpg,width=300)]] |
| 127 | [[BR]][[BR]] |
| 128 | == Technical Contacts == |
| 129 | |
| 130 | |
| 131 | |
| 132 | [[BR]][[BR]][[BR]] |
| 133 | |
| 134 | |
| 135 | |
| 136 | |
| 137 | |
| 138 | |
| 139 | = Salt Lake City, UT (SALT) = |
| 140 | [[PageOutline]] |
| 141 | |
| 142 | == Reaching SPP == |
| 143 | The SPP node at I2 SALT is connected to I2's Infinera via ProtoGENI's !ProCurve 5406 switch. SPP is also connected to I2's production IP/DCN network via I2's !ProCurve switch. |
| 144 | |
| 145 | IP addresses have been assigned out of prefix 64.57.23.144/28. The gateway is 64.57.23.145 (Juniper T640 router). |
| 146 | |
| 147 | |
| 148 | === Technical Contacts === |
| 149 | * John !DeHart (best to contact first) jdd@arl.wustl.edu |
| 150 | * David Zar dzar@wustl.edu |
| 151 | [[BR]] |
| 152 | |
| 153 | === IP Addresses === |
| 154 | |
| 155 | ''The following addresses are only available to SPP administrators:'' |
| 156 | |
| 157 | || Device || DNS || Purpose || IP || |
| 158 | || I2 Juniper T640 || || Gateway || 64.57.23.145 || |
| 159 | || R200 Control Processor || || || 64.57.23.151 || |
| 160 | || SPP Network Processor || || || 64.57.23.210/30 || |
| 161 | || SPP Network Processor 2 || || || 64.57.23.214/30 || |
| 162 | || SPP Network Processor 3 || || || 64.57.23.216/30 || |
| 163 | |
| 164 | |
| 165 | === VLAN IDs === |
| 166 | |
| 167 | || Device || Port || Purpose || VLAN ID || |
| 168 | || Radisys 7010 || 1 || Test Network with ProtoGENI || 3008 || |
| 169 | || Radisys 7010 || 2 || Test Network with ProtoGENI || 3008 || |
| 170 | || Radisys 7010 || 3 || Test Network with ProtoGENI || 3009 || |
| 171 | || Radisys 7010 || 4 || Test Network with ProtoGENI || 3009 || |
| 172 | || Radisys 7010 || 5 || Test Network with ProtoGENI || 3010 || |
| 173 | || Radisys 7010 || 6 || Test Network with ProtoGENI || 3010 || |
| 174 | || Radisys 7010 || 7 || Test Network with ProtoGENI || 3011 || |
| 175 | |
| 176 | |
| 177 | |
| 178 | [[BR]][[BR]] |
| 179 | == Equipment == |
| 180 | |
| 181 | === Dell R200 Control Processor === |
| 182 | {{{ |
| 183 | #!comment |
| 184 | [[Image(spp-dell-front.jpg,width=300,align=right)]] |
| 185 | }}} |
| 186 | |
| 187 | || Port || Destination Device || Dst. Port || |
| 188 | || A || GPE2 || A || |
| 189 | || B || GPE1 || B || |
| 190 | || C || Netgear Console || |
| 191 | || D || ATCA || D || |
| 192 | || E || Radisys ATCA 2210 || E || |
| 193 | || 3 || I2 !ProCurve || C11 || |
| 194 | |
| 195 | === Netgear Prosafe switch (GSM7328S) === |
| 196 | {{{ |
| 197 | #!comment |
| 198 | [[Image(spp-netgear-front.jpg,width=300,align=right)]] |
| 199 | }}} |
| 200 | || Port || Destination Device || Dst. Port || |
| 201 | || Module 1 || ATCA 2210 (Slot 1) || XFP 1/4 || |
| 202 | || Console || Control Processor || C || |
| 203 | || 1 || Control Processor || NetFPGA 0 || |
| 204 | || 2 || Control Processor || NetFPGA 1 || |
| 205 | || 3 || Control Processor || NetFPGA 2 || |
| 206 | || 4 || Control Processor || NetFPGA 3 || |
| 207 | |
| 208 | |
| 209 | === ATCA Chassis === |
| 210 | {{{ |
| 211 | #!comment |
| 212 | [[Image(SPP-Backbone-Node.jpg,width=250,align=right)]] |
| 213 | }}} |
| 214 | ==== Slot 6 - Radisys ATCA 7010 (LC) ==== |
| 215 | || Port || Destination Device || Dst. Port || |
| 216 | || 1 (back) || ProtoGENI !ProCurve || C14 || |
| 217 | || 2 (back) || ProtoGENI !ProCurve || C15 || |
| 218 | || 3 (back) || ProtoGENI !ProCurve || C16 || |
| 219 | || 4 (back) || ProtoGENI !ProCurve || C17 || |
| 220 | || 5 (back) || ProtoGENI !ProCurve || C18 || |
| 221 | || 6 (back) || ProtoGENI !ProCurve || C19 || |
| 222 | || 7 (back) || ProtoGENI !ProCurve || C20 || |
| 223 | || 8 (back) || I2 !ProCurve || C8 || |
| 224 | || 9 (back) || I2 !ProCurve || C9 || |
| 225 | || 10 (back) || I2 !ProCurve || C10 || |
| 226 | || NPU-B || Radisys 2210 || SFP 1/7 || |
| 227 | |
| 228 | ==== Slot 5 - Radisys ATCA 7010 (NPE) ==== |
| 229 | {{{ |
| 230 | #!comment |
| 231 | [[Image(spp-node-front.jpg,width=200,align=right)]] [[Image(spp-node-back.jpg,width=200,align=right)]] |
| 232 | }}} |
| 233 | || Port || Destination Device || Dst. Port || |
| 234 | || NPU-B || Radisys 2210 || SFP 1/8 || |
| 235 | |
| 236 | ==== Slot 4 - GPE2 ==== |
| 237 | || Port || Destination Device || Dst. Port || |
| 238 | || A || Control Processor || A || |
| 239 | |
| 240 | |
| 241 | ==== Slot 3 - GPE1 ==== |
| 242 | || Port || Destination Device || Dst. Port || |
| 243 | || B || Control Processor || B || |
| 244 | |
| 245 | ==== Slot 2 - Empty ==== |
| 246 | |
| 247 | ==== Slot 1 - Radisys ATCA 2210 ==== |
| 248 | || Port || Destination Device || Dst. Port || |
| 249 | || SFP 3/1 (back) || Control Processor || 1 || |
| 250 | || XFP 1/4 || Netgear switch mm lc-lc || module 1 || |
| 251 | || SFP 1/6 || Processor || 2 || |
| 252 | || SFP 1/7 || LC || NPU-B || |
| 253 | || SFP 1/8 || NPE || NPU-B || |
| 254 | || E || Control Processor || E || |
| 255 | |
| 256 | |
| 257 | [[BR]][[BR]][[BR]] |
| 258 | |