wiki:PlanetLabBackbone

Back to the Integration GENI Integration Page?

Overview

The PlanetLab cluster has nodes in I2's WASH PoP (McLean, VA) and I2's SALT PoP (Salt Lake City, UT). Kansas City (KANS) should be installed and tested in September of 2009.




McLean, VA (WASH)

Centered view of the three I2 racks at WASH.
Photo of ProtoGENI/MAX deployment at I2 courtesy of Chris Tracy

Reaching SPP

The SPP node at I2 WASH is connected to I2's Infinera via ProtoGENI's ProCurve 5406 switch. SPP is also connected to I2's production IP/DCN network via I2's ProCurve switch.

IP addresses have been assigned out of prefix 64.57.23.160/28.

Technical Contacts


IP Addresses

The following addresses are only available to SPP administrators:

Device DNS Purpose IP
I2 Juniper T640 Router Gateway 64.57.23.161
R200 Control Processor 64.57.23.167

VLAN IDs

Device Port Purpose VLAN ID
Radisys 7010 1 Test Network with ProtoGENI 3001
Radisys 7010 2 Test Network with ProtoGENI 3001
Radisys 7010 3 Test Network with ProtoGENI 3002
Radisys 7010 4 Test Network with ProtoGENI 3002
Radisys 7010 5 Test Network with ProtoGENI 3003
Radisys 7010 6 Test Network with ProtoGENI 3003



Equipment

Dell R200 Control Processor

No image "spp-dell-front.jpg" attached to PlanetLabBackbone

Port Destination Device Dst. Port
A GPE2 A
B GPE1 B
C Netgear Console
D ATCA D
E Radisys ATCA 2210 E

Netgear Prosafe switch (GSM7328S)

No image "spp-netgear-front.jpg" attached to PlanetLabBackbone

Port Destination Device Dst. Port
Module 1 ATCA 2210 (Slot 1) XFP 1/4
Console Control Processor C
1 Control Processor NetFPGA 0
2 Control Processor NetFPGA 1
3 Control Processor NetFPGA 2
4 Control Processor NetFPGA 3

ATCA Chassis

No image "SPP-Backbone-Node.jpg" attached to PlanetLabBackbone

Slot 6 - Radisys ATCA 7010 (LC)

Port Destination Device Dst. Port
1 (back) ProtoGENI ProCurve A17
2 (back) ProtoGENI ProCurve A18
3 (back) ProtoGENI ProCurve A19
4 (back) ProtoGENI ProCurve A20
5 (back) ProtoGENI ProCurve A21
6 (back) ProtoGENI ProCurve A22
8 (back) I2 ProCurve 8
9 (back) I2 ProCurve 9
10 (back) I2 ProCurve 10
NPU-B Radisys 2210 SFP 1/7

Slot 5 - Radisys ATCA 7010 (NPE)

No image "spp-node-front.jpg" attached to PlanetLabBackbone No image "spp-node-back.jpg" attached to PlanetLabBackbone

Port Destination Device Dst. Port
NPU-B Radisys 2210 SFP 1/8

Slot 4 - GPE2

Port Destination Device Dst. Port
A Control Processor A

Slot 3 - GPE1

Port Destination Device Dst. Port
B Control Processor B

Slot 2 - Empty

Slot 1 - Radisys ATCA 2210

Port Destination Device Dst. Port
SFP 3/1 (back) Control Processor 1
XFP 1/4 Netgear switch mm lc-lc module 1
SFP 1/6 Processor 2
SFP 1/7 LC NPU-B
SFP 1/8 NPE NPU-B
E Control Processor E




Reaching MAX



Equipment

A typical MAX node (from MAX's GENI wiki):

No image "typical-dragon-node-diagram.png" attached to PlanetLabBackbone No image "typical-dragon-node-equipment.png" attached to PlanetLabBackbone

MAX is connected to ProtoGENI as shown in the following diagram (thanks to Chris Tracy for the diagram):

No image "MAX2ProtoATWash.jpg" attached to PlanetLabBackbone



Technical Contacts




Salt Lake City, UT (SALT)

Reaching SPP

The SPP node at I2 SALT is connected to I2's Infinera via ProtoGENI's ProCurve 5406 switch. SPP is also connected to I2's production IP/DCN network via I2's ProCurve switch.

IP addresses have been assigned out of prefix 64.57.23.144/28. The gateway is 64.57.23.145 (Juniper T640 router).

Technical Contacts


IP Addresses

The following addresses are only available to SPP administrators:

Device DNS Purpose IP
I2 Juniper T640 Gateway 64.57.23.145
R200 Control Processor 64.57.23.151
SPP Network Processor 64.57.23.210/30
SPP Network Processor 2 64.57.23.214/30
SPP Network Processor 3 64.57.23.216/30

VLAN IDs

Device Port Purpose VLAN ID
Radisys 7010 1 Test Network with ProtoGENI 3008
Radisys 7010 2 Test Network with ProtoGENI 3008
Radisys 7010 3 Test Network with ProtoGENI 3009
Radisys 7010 4 Test Network with ProtoGENI 3009
Radisys 7010 5 Test Network with ProtoGENI 3010
Radisys 7010 6 Test Network with ProtoGENI 3010
Radisys 7010 7 Test Network with ProtoGENI 3011



Equipment

Dell R200 Control Processor

Port Destination Device Dst. Port
A GPE2 A
B GPE1 B
C Netgear Console
D ATCA D
E Radisys ATCA 2210 E
3 I2 ProCurve C11

Netgear Prosafe switch (GSM7328S)

Port Destination Device Dst. Port
Module 1 ATCA 2210 (Slot 1) XFP 1/4
Console Control Processor C
1 Control Processor NetFPGA 0
2 Control Processor NetFPGA 1
3 Control Processor NetFPGA 2
4 Control Processor NetFPGA 3

ATCA Chassis

Slot 6 - Radisys ATCA 7010 (LC)

Port Destination Device Dst. Port
1 (back) ProtoGENI ProCurve C14
2 (back) ProtoGENI ProCurve C15
3 (back) ProtoGENI ProCurve C16
4 (back) ProtoGENI ProCurve C17
5 (back) ProtoGENI ProCurve C18
6 (back) ProtoGENI ProCurve C19
7 (back) ProtoGENI ProCurve C20
8 (back) I2 ProCurve C8
9 (back) I2 ProCurve C9
10 (back) I2 ProCurve C10
NPU-B Radisys 2210 SFP 1/7

Slot 5 - Radisys ATCA 7010 (NPE)

Port Destination Device Dst. Port
NPU-B Radisys 2210 SFP 1/8

Slot 4 - GPE2

Port Destination Device Dst. Port
A Control Processor A

Slot 3 - GPE1

Port Destination Device Dst. Port
B Control Processor B

Slot 2 - Empty

Slot 1 - Radisys ATCA 2210

Port Destination Device Dst. Port
SFP 3/1 (back) Control Processor 1
XFP 1/4 Netgear switch mm lc-lc module 1
SFP 1/6 Processor 2
SFP 1/7 LC NPU-B
SFP 1/8 NPE NPU-B
E Control Processor E




Last modified 15 years ago Last modified on 09/07/09 12:52:13