Changes between Version 2 and Version 3 of TracCgi


Ignore:
Timestamp:
11/14/18 14:30:36 (5 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • TracCgi

    v2 v3  
    1 = Installing Trac as CGI =
     1= Installing Trac as CGI
     2[[TracGuideToc]]
     3[[PageOutline]]
    24
    3 {{{
    4 #!div class=important
    5   ''Please note that using Trac via CGI is the slowest deployment method available. It is slower than [TracModPython mod_python], [TracFastCgi FastCGI] and even [trac:TracOnWindowsIisAjp IIS/AJP] on Windows.''
     5{{{#!div class=important
     6 ''Please note that using Trac via CGI is the slowest deployment method available. It is slower than [wiki:TracModWSGI mod_wsgi], [TracModPython mod_python], [TracFastCgi FastCGI] and even [trac:TracOnWindowsIisAjp IIS/AJP] on Windows.''
    67}}}
    78
    8 CGI script is the entrypoint that web-server calls when a web-request to an application is made. To generate the `trac.cgi` script run:
    9 {{{
    10 trac-admin /path/to/env deploy /path/to/www/trac
    11 }}}
    12 `trac.cgi` will be in the `cgi-bin` folder inside the given path. Make sure it is executable by your web server. This command also copies `static resource` files to a `htdocs` directory of a given destination.
     9CGI script is the entrypoint that web-server calls when a web-request to an application is made. The `trac.cgi` script can be created using the `trac-admin <env> deploy <dir>` command which automatically substitutes the required paths, see TracInstall#cgi-bin. Make sure the script is executable by your web server.
    1310
    14 == Apache web-server configuration ==
     11== Apache web-server configuration
    1512
    1613In [http://httpd.apache.org/ Apache] there are two ways to run Trac as CGI:
    1714
    18  1. Use a `ScriptAlias` directive that maps an URL to the `trac.cgi` script (recommended)
    19  2. Copy the `trac.cgi` file into the directory for CGI executables used by your web server (commonly named `cgi-bin`). You can also create a symbolic link, but in that case make sure that the `FollowSymLinks` option is enabled for the `cgi-bin` directory.
     15 1. Use a `ScriptAlias` directive that maps a URL to the `trac.cgi` script (recommended)
     16 1. Copy the `trac.cgi` file into the directory for CGI executables used by your web server (commonly named `cgi-bin`). You can also create a symbolic link, but in that case make sure that the `FollowSymLinks` option is enabled for the `cgi-bin` directory.
    2017
    2118To make Trac available at `http://yourhost.example.org/trac` add `ScriptAlias` directive to Apache configuration file, changing `trac.cgi` path to match your installation:
    22 {{{
     19{{{#!apache
    2320ScriptAlias /trac /path/to/www/trac/cgi-bin/trac.cgi
    2421}}}
    2522
    26  ''Note that this directive requires enabled `mod_alias` module.''
     23 ''Note that this directive requires that the `mod_alias` module is enabled.''
    2724
    2825If you're using Trac with a single project you need to set its location using the `TRAC_ENV` environment variable:
    29 {{{
     26{{{#!apache
    3027<Location "/trac">
    3128  SetEnv TRAC_ENV "/path/to/projectenv"
    … …  
    3431
    3532Or to use multiple projects you can specify their common parent directory using the `TRAC_ENV_PARENT_DIR` variable:
    36 {{{
     33{{{#!apache
    3734<Location "/trac">
    3835  SetEnv TRAC_ENV_PARENT_DIR "/path/to/project/parent/dir"
    … …  
    4037}}}
    4138
    42  ''Note that the `SetEnv` directive requires enabled `mod_env` module. It is also possible to set TRAC_ENV in trac.cgi. Just add the following code between "try:" and "from trac.web ...":''
     39  ''Note that the `SetEnv` directive requires that the `mod_env` module is enabled.''
    4340
    44 {{{
    45     import os
     41An alternative to `SetEnv` is editing `TRAC_ENV` or `TRAC_ENV_PARENT_DIR` in `trac.cgi`:
     42
     43{{{#!python
    4644    os.environ['TRAC_ENV'] = "/path/to/projectenv"
    4745}}}
    4846
    49  '' Or for TRAC_ENV_PARENT_DIR: ''
    50 
    51 {{{
    52     import os
    53     os.environ['TRAC_ENV_PARENT_DIR'] = "/path/to/project/parent/dir"
     47{{{#!python
     48    os.environ['TRAC_ENV_PARENT_DIR'] = "/path/to/parent/dir"
    5449}}}
    5550
    56 If you are using the [http://httpd.apache.org/docs/suexec.html Apache suEXEC] feature please see [http://trac.edgewall.org/wiki/ApacheSuexec].
     51If you are using the [http://httpd.apache.org/docs/suexec.html Apache suEXEC] feature please see [trac:ApacheSuexec].
    5752
    58 On some systems, you ''may'' need to edit the shebang line in the `trac.cgi` file to point to your real Python installation path. On a Windows system you may need to configure Windows to know how to execute a .cgi file (Explorer -> Tools -> Folder Options -> File Types -> CGI).
     53On some systems, you ''may'' need to edit the shebang line in the `trac.cgi` file to point to your real Python installation path. On a Windows system you may need to configure Windows to know how to execute a `.cgi` file (Explorer -> Tools -> Folder Options -> File Types -> CGI).
    5954
    60 == Mapping Static Resources ==
     55=== Python Egg Cache
    6156
    62 Out of the box, Trac will pass static resources such as style sheets or images through itself. For a CGI setup this is '''highly undesirable''', because this way CGI script is invoked for documents that could be much more efficiently served directly by web server.
    63 
    64 Web servers such as [http://httpd.apache.org/ Apache] allow you to create “Aliases” to resources, giving them a virtual URL that doesn't necessarily reflect the layout of the servers file system. We already used this capability by defining a `ScriptAlias` for the CGI script. We also can map requests for static resources directly to the directory on the file system, avoiding processing these requests by CGI script.
    65 
    66 Add the following snippet to Apache configuration '''before''' the `ScriptAlias` for the CGI script, changing paths to match your deployment:
    67 {{{
    68 Alias /trac/chrome/common /path/to/www/trac/htdocs
    69 <Directory "/path/to/www/trac/htdocs">
    70   Order allow,deny
    71   Allow from all
    72 </Directory>
     57The [TracInstall#egg-cache egg-cache] can be configured using an `os.environ` statement in `trac.cgi`, as shown above.
     58To do the same from the Apache configuration, use the `SetEnv` directive:
     59{{{#!apache
     60SetEnv PYTHON_EGG_CACHE /path/to/dir
    7361}}}
    7462
    75 Note that we mapped `/trac` part of the URL to the `trac.cgi` script, and the path `/chrome/common` is the path you have to append to that location to intercept requests to the static resources.
     63Put this directive next to where you set the path to the [TracEnvironment Trac environment], i.e. in the same `<Location>` block.
    7664
    77 For example, if Trac is mapped to `/cgi-bin/trac.cgi` on your server, the URL of the Alias should be `/cgi-bin/trac.cgi/chrome/common`.
    78 
    79 Similarly, if you have static resources in a project's htdocs directory (which is referenced by /chrome/site URL in themes), you can configure Apache to serve those resources (again, put this '''before''' the `ScriptAlias` for the CGI script, and adjust names and locations to match your installation):
    80 
    81 {{{
    82 Alias /trac/chrome/site /path/to/projectenv/htdocs
    83 <Directory "/path/to/projectenv/htdocs">
    84   Order allow,deny
    85   Allow from all
    86 </Directory>
     65{{{#!apache
     66 <Location /trac>
     67   SetEnv TRAC_ENV /path/to/projenv
     68   SetEnv PYTHON_EGG_CACHE /path/to/dir
     69 </Location>
    8770}}}
    8871
    89 Alternatively to hacking `/trac/chrome/site`, you can directly specify path to static resources using `htdocs_location` configuration option in [wiki:TracIni trac.ini]:
    90 {{{
    91 [trac]
    92 htdocs_location = http://yourhost.example.org/trac-htdocs
    93 }}}
    94 
    95 Trac will then use this URL when embedding static resources into HTML pages. Of course, you still need to make the Trac `htdocs` directory available through the web server at the specified URL, for example by copying (or linking) the directory into the document root of the web server:
    96 {{{
    97 $ ln -s /path/to/www/trac/htdocs /var/www/yourhost.example.org/trac-htdocs
    98 }}}
    99 
    100 Note that in order to get this `htdocs` directory, you need first to extract the relevant Trac resources using the `deploy` command of TracAdmin:
    101 [[TracAdminHelp(deploy)]]
    10272
    10373
    104 == Adding Authentication ==
     74=== Using WSGI
    10575
    106 The simplest way to enable authentication with Apache is to create a password file. Use the `htpasswd` program to create the password file:
    107 {{{
    108 $ htpasswd -c /somewhere/trac.htpasswd admin
    109 New password: <type password>
    110 Re-type new password: <type password again>
    111 Adding password for user admin
    112 }}}
     76You can run a [http://henry.precheur.org/python/how_to_serve_cgi WSGI handler] [http://pythonweb.org/projects/webmodules/doc/0.5.3/html_multipage/lib/example-webserver-web-wsgi-simple-cgi.html under CGI].  You can [wiki:TracModWSGI#Thetrac.wsgiscript write your own application function], or use the deployed trac.wsgi's application.
    11377
    114 After the first user, you dont need the "-c" option anymore:
    115 {{{
    116 $ htpasswd /somewhere/trac.htpasswd john
    117 New password: <type password>
    118 Re-type new password: <type password again>
    119 Adding password for user john
    120 }}}
     78== Mapping Static Resources
    12179
    122   ''See the man page for `htpasswd` for full documentation.''
     80See TracInstall#MappingStaticResources.
    12381
    124 After you've created the users, you can set their permissions using TracPermissions.
     82== Adding Authentication
    12583
    126 Now, you'll need to enable authentication against the password file in the Apache configuration:
    127 {{{
    128 <Location "/trac/login">
    129   AuthType Basic
    130   AuthName "Trac"
    131   AuthUserFile /somewhere/trac.htpasswd
    132   Require valid-user
    133 </Location>
    134 }}}
    135 
    136 If you're hosting multiple projects you can use the same password file for all of them:
    137 {{{
    138 <LocationMatch "/trac/[^/]+/login">
    139   AuthType Basic
    140   AuthName "Trac"
    141   AuthUserFile /somewhere/trac.htpasswd
    142   Require valid-user
    143 </LocationMatch>
    144 }}}
    145 
    146 For better security, it is recommended that you either enable SSL or at least use the “digest” authentication scheme instead of “Basic”. Please read the [http://httpd.apache.org/docs/2.0/ Apache HTTPD documentation] to find out more. For example, on a Debian 4.0r1 (etch) system the relevant section  in apache configuration can look like this:
    147 {{{
    148 <Location "/trac/login">
    149     LoadModule auth_digest_module /usr/lib/apache2/modules/mod_auth_digest.so
    150     AuthType Digest
    151     AuthName "trac"
    152     AuthDigestDomain /trac
    153     AuthUserFile /somewhere/trac.htpasswd
    154     Require valid-user
    155 </Location>
    156 }}}
    157 and you'll have to create your .htpasswd file with htdigest instead of htpasswd as follows:
    158 {{{
    159 # htdigest /somewhere/trac.htpasswd trac admin
    160 }}}
    161 where the "trac" parameter above is the same as !AuthName above  ("Realm" in apache-docs).
     84See TracInstall#ConfiguringAuthentication.
    16285
    16386----
    164 See also:  TracGuide, TracInstall, [wiki:TracModWSGI], TracFastCgi, TracModPython
     87See also:  TracInstall, [wiki:TracModWSGI], TracFastCgi, TracModPython