Custom Query (98 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (10 - 12 of 98)

1 2 3 4 5 6 7 8 9 10 11 12 13 14
Ticket Resolution Summary Owner Reporter
#112 fixed Creating sliver with 2 VMs on shared vlan "mesoscale-openflow" fails at GATech somebody lnevers@bbn.com
Description

Requesting 2 VMs on the shared VLAN "mesoscale-openflow" results in both nodes in geni_status "failed". Attaching the request RSpec, and below is the geni_error reported:

"geni_error": "Running os dependent initialization script rc.linux\n*** WARNING: could not identify root disk, no swap enabled
Informing Emulab Control that we have rebooted
Checking Testbed reservation status
Cleaning node; removing configuration files
Allocated! pgeni-gpolab-bbn-com/EG-CT-4/gatech-ig2
Setting up for SFS ... 
Setting up Ping of Death
Authenticated IPOD enabled from 143.215.216.132/255.255.255.255
Starting node health monitoring daemon
FATAL: Module i2c_piix4 not found.
FATAL: Module w83781d not found.
Failed running rc.healthd (256)! at /usr/local/etc/emulab/libsetup.pm line 1152, <TD> line 2.
Starting slothd usage detector
Starting testbed update watchdog
Running config scripts
Checking manifest...
Checking Testbed localization configuration ... 
Checking Testbed keys ...
Checking Testbed Blobs configuration ... 
Checking Testbed user accounts configuration ... 
Adding group: pgeni-gpolab-bbn/503
Adding: lnevers/20001/503/1/lnevers//users/lnevers/
updating local home directory
Adding: geniuser/502/503/1/Geni User//users/geniuser/
updating local home directory
Checking Testbed route configuration ... 
/usr/local/etc/emulab/dijkstra: Invalid source argument: source=gatech-ig2
*** WARNING: dijkstra exited with status 256!
*** WARNING: Could not get routes from ddijkstra!
*** /usr/local/etc/emulab/rc/rc.route:
    Could not get router configuration from libsetup!
 Failed running rc.route (256)! at /usr/local/etc/emulab/libsetup.pm line 1152.
Checking Testbed tunnel configuration ... 
Checking Testbed interface configuration ... 
Use of uninitialized value $speed in pattern match (m//) at /usr/local/etc/emulab/liblocsetup.pm line 645.
*** Bad speed units  in ifconfig, default to 100Mbps
Use of uninitialized value $duplex in string eq at /usr/local/etc/emulab/liblocsetup.pm line 678.
Use of uninitialized value $duplex in string eq at /usr/local/etc/emulab/liblocsetup.pm line 681.
Use of uninitialized value $duplex in concatenation (.) or string at /usr/local/etc/emulab/liblocsetup.pm line 685.
*** Bad duplex  in ifconfig, default to full
Cannot set new settings: Operation not supported
  not setting speed
  not setting duplex
  not setting autoneg
/var/emulab/boot/rc.ifc: line 13: /var/emulab/boot/rc.route: No such file or directory
*** /usr/local/etc/emulab/rc/rc.ifconfig:
    Error running /var/emulab/boot/rc.ifc
  Failed running rc.ifconfig (6400)! at /usr/local/etc/emulab/libsetup.pm line 1152.
Using Linux netem instead of custom qdiscs.
Checking Testbed hostnames configuration ... 
Checking Testbed trace configuration ... 
Checking Testbed trafgen configuration ... 
Checking Testbed Tarball configuration ... 
Checking Testbed RPM configuration ... 
Starting linktest daemon
*** ERROR: linktest daemon failed to start. Status: 15
*** /usr/local/etc/emulab/rc/rc.bootsetup:
   Error running /usr/local/etc/emulab/rc/rc.linktest ", 
      "geni_status": "failed"
#111 fixed Sliver failure for GA Tech aggregate for Confirmation Test IG-CT-3 somebody lnevers@bbn.com
Description

Running test case IG-CT-3, which includes 1 VM @GPO InstaGENI and 1 VM @ GA Tech InstaGENI connected via a GRE Tunnel.

The sliver creation is successful and the sliver status is ready for GPO InstaGENI, but the sliver failed for the GA Tech sliver. Failure shown in sliverstatus may be the same as reported by Josh in earlier email, writing ticket to track to resolution:

      "geni_error": "Running os dependent initialization script rc.linux
*** WARNING: could not identify root disk, no swap enabled
Informing Emulab Control that we have rebooted
Checking Testbed reservation status
Cleaning node; removing configuration files Allocated! emulab-net/IG-CT-3/VM-2
Setting up for SFS ... 
Setting up Ping of Death
Authenticated IPOD enabled from 143.215.216.132/255.255.255.255
Starting node health monitoring daemon
FATAL: Module i2c_piix4 not found.
FATAL: Module w83781d not found.
Failed running rc.healthd (256)! at /usr/local/etc/emulab/libsetup.pm line 1152, <TD> line 2.
Starting slothd usage detector
Starting testbed update watchdog
Running config scripts
Checking manifest...
Checking Testbed localization configuration ... 
Checking Testbed keys ...
Checking Testbed Blobs configuration ... 
Checking Testbed user accounts configuration ... 
Adding group: emulab-net/502
Adding: lnevers/20001/502/1/lnevers//users/lnevers/
updating local home directory
Adding: geniuser/502/502/1/Geni User//users/geniuser/
updating local home directory
Checking Testbed route configuration ... 
net.ipv4.conf.all.forwarding = 1
Checking Testbed tunnel 
configuration ... 
FATAL: Module ip_gre not found.
Checking Testbed interface 
configuration ... 
Using Linux netem instead of custom qdiscs.
Checking Testbed hostnames configuration ... 
Checking Testbed trace configuration ... 
Checking Testbed trafgen configuration ... 
Checking Testbed Tarball configuration ... 
Checking Testbed RPM configuration ... 
Starting linktest daemon
*** ERROR: linktest daemon failed to start. Status: 15
*** /usr/local/etc/emulab/rc/rc.bootsetup:
    Error running /usr/local/etc/emulab/rc/rc.linktest ", 
      "geni_status": "failed"

Also received this email failure notification:

-------- Original Message --------
Subject: 	GATECHINSTAGENI: 1 nodes failed to boot
Date: 	Mon, 29 Apr 2013 11:35:59 -0400 (EDT)
From: 	testbed-ops@ops.instageni.rnoc.gatech.edu
To: 	lnevers <lnevers@emulab.net>
CC: 	testbed-ops@ops.instageni.rnoc.gatech.edu


Nodes:
  [Node: pcvm2-2]
in urn:publicid:IDN+emulab.net+slice+IG-CT-3 failed.

Slice name is "IG-CT-3". VMs assigned are:

GA Tech: pc2.instageni.rnoc.gatech.edu port 31290 GPO: pc2.instageni.gpolab.bbn.com port 31290

#102 fixed Missing UKY compute resource aggregate at GMOC monitoring somebody lnevers@bbn.com
Description

While starting the monitoring test case IG-CT-5 for Confirmation Testing found that there is no compute resource aggregate for UKY InstaGENI rack.

https://gmoc-db.grnoc.iu.edu/protected-openid/index.pl?method=aggregates&search=uky

There is a FOAM aggregate.

1 2 3 4 5 6 7 8 9 10 11 12 13 14
Note: See TracQuery for help on using queries.