89 | | lors_upload --help |
90 | | Usage: lors_upload <filename> |
91 | | -f, --samename Specify the exNode filename by appending .xnd to the original filename. |
92 | | -i, --stdin Read from standard input rather than a specified filename. |
93 | | -o, --outputfile=STRING Specify a specific name for the output exNode file. |
94 | | -v, --version Display Version information about this package. |
95 | | -V, --verbose=0 Modify the level or mode of Verbosity in output messages. |
96 | | -H, --lbone-host=STRING Specify an L-Bone Server for resource discover and proxmity resolution. |
97 | | -P, --lbone-port=6767 Specify the port number when using an L-Bone Server on a non standard port. |
98 | | -l, --location="state= TN" Specify a location hint to pass the L-Bone Query. |
99 | | -d, --duration=STRING Specify the amount of time to allocate storage. The available modifiers are 'm' 'h' 'd' for 'minute' 'hour' and 'days' respectively. Default is seconds. (e.g. -d 1d or -d |
| 89 | lors_upload --help |
| 90 | Usage: lors_upload <filename> |
| 91 | -f, --samename Specify the exNode filename by appending .xnd to the original filename. |
| 92 | -i, --stdin Read from standard input rather than a specified filename. |
| 93 | -o, --outputfile=STRING Specify a specific name for the output exNode file. |
| 94 | -v, --version Display Version information about this package. |
| 95 | -V, --verbose=0 Modify the level or mode of Verbosity in output messages. |
| 96 | -H, --lbone-host=STRING Specify an L-Bone Server for resource discover and proxmity resolution. |
| 97 | -P, --lbone-port=6767 Specify the port number when using an L-Bone Server on a non standard port. |
| 98 | -l, --location="state= TN" Specify a location hint to pass the L-Bone Query. |
| 99 | -d, --duration=STRING Specify the amount of time to allocate storage. The available modifiers are 'm' 'h' 'd' for 'minute' 'hour' and 'days' respectively. Default is seconds. (e.g. -d 1d or -d |
101 | | -s, --soft Specify SOFT storage for storage allocations. |
102 | | -h, --hard Specify HARD storage for storage allocations. |
103 | | -m, --maxdepots=6 Specify the maximum number of depots returned by the 'location' hint. |
104 | | -b, -bs='5M' Specify the logical data blocksize of input file. |
105 | | -c, --copies=1 Specify the number of copies. |
106 | | -F, --fragments=4 Rather than specifying the logical data blocksize, specify the number of blocks into which the file should be divided. |
107 | | --depot-list Only use depots specified in .xndrc file |
108 | | -t, --threads=INT Specify the maximum number of threads to use to perform Upload. |
109 | | -T, --timeout='3m' Specify the maximum time to allow for all operations. |
110 | | -M, --buffersize=STRING Specify the maximum internal buffer to use on operations. |
111 | | -O, --offset=STRING Specify an offset relative to the exNode from which download will begin |
112 | | -L, --length=STRING Specify a length other than the logical extent of the exNode. |
113 | | -n, --none Turn off all e2e services. |
114 | | -e, --des Turn on des encryption. |
115 | | -a, --aes Turn on aes encryption. |
116 | | -z, --compress Turn on zlib compression. |
117 | | -x, --xor Turn on xor encryption. |
118 | | -k, --checksum Turn on checksum. |
119 | | -E, --e2e-blocksize=STRING When specifying e2e conditioning, select an e2e bocksize which will evenly fit into your chosen Mapping Blocksize. |
120 | | -X, --xndrc=<filename> You may specify an alternate source for the upload DepotList. |
121 | | -D, --demo Add the messages understood by the LoRS View visualization. |
122 | | --lodn-allocate[=STRING] Turn on LoDN proxy allocation. The STRING value contains authentication credentials separated by an &. |
123 | | -n, --normal-allocate Override LoDN proxy allocation if specified in the xndrc file. |
| 101 | -s, --soft Specify SOFT storage for storage allocations. |
| 102 | -h, --hard Specify HARD storage for storage allocations. |
| 103 | -m, --maxdepots=6 Specify the maximum number of depots returned by the 'location' hint. |
| 104 | -b, -bs='5M' Specify the logical data blocksize of input file. |
| 105 | -c, --copies=1 Specify the number of copies. |
| 106 | -F, --fragments=4 Rather than specifying the logical data blocksize, specify the number of blocks into which the file should be divided. |
| 107 | --depot-list Only use depots specified in .xndrc file |
| 108 | -t, --threads=INT Specify the maximum number of threads to use to perform Upload. |
| 109 | -T, --timeout='3m' Specify the maximum time to allow for all operations. |
| 110 | -M, --buffersize=STRING Specify the maximum internal buffer to use on operations. |
| 111 | -O, --offset=STRING Specify an offset relative to the exNode from which download will begin |
| 112 | -L, --length=STRING Specify a length other than the logical extent of the exNode. |
| 113 | -n, --none Turn off all e2e services. |
| 114 | -e, --des Turn on des encryption. |
| 115 | -a, --aes Turn on aes encryption. |
| 116 | -z, --compress Turn on zlib compression. |
| 117 | -x, --xor Turn on xor encryption. |
| 118 | -k, --checksum Turn on checksum. |
| 119 | -E, --e2e-blocksize=STRING When specifying e2e conditioning, select an e2e bocksize which will evenly fit into your chosen Mapping Blocksize. |
| 120 | -X, --xndrc=<filename> You may specify an alternate source for the upload DepotList. |
| 121 | -D, --demo Add the messages understood by the LoRS View visualization. |
| 122 | --lodn-allocate[=STRING] Turn on LoDN proxy allocation. The STRING value contains authentication credentials separated by an &. |
| 123 | -n, --normal-allocate Override LoDN proxy allocation if specified in the xndrc file. |