Changes between Version 25 and Version 26 of clusterdvlan
- Timestamp:
- 10/28/09 17:05:15 (15 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
clusterdvlan
v25 v26 161 161 c) Pre-configured VLANs on GENI “wave”, between certain Internet2 Wave System nodes. See http://www.internet2.edu/waveco/ 162 162 163 This is the approach being used by ProtoGENI backbone node. See http://www.protogeni.net/trac/protogeni/wiki/BackboneNode 163 This is the approach being used by ProtoGENI backbone. 164 165 See http://www.protogeni.net/trac/protogeni/wiki/Backbone 166 167 See http://www.protogeni.net/trac/protogeni/wiki/BackboneNode 164 168 165 169 Pt-to-pt? Multi-point? … … 168 172 d) Direct connections to the Internet2 Wave System nodes. 169 173 170 This is the approach being used by ProtoGENI backbone nodes. See http://www.protogeni.net/trac/protogeni/wiki/BackboneNode 171 172 More details on this can be found at http://groups.geni.net/syseng/wiki/ConnectivityProto . It states that the ProtoGENI switches (shown below in the IP table) are each attached to the GENI L2 wave but also to I2's Layer 3 network at 1Gb/s. 174 This is the approach being used by ProtoGENI backbone nodes. 175 176 See http://www.protogeni.net/trac/protogeni/wiki/Backbone 177 178 See http://www.protogeni.net/trac/protogeni/wiki/BackboneNode 179 180 More details on this can be found at ? It states that the ProtoGENI switches (shown below in the IP table) are each attached to the GENI L2 wave but also to I2's Layer 3 network at 1Gb/s. 173 181 174 182 e) Tunnel to Internet2 Wave System nodes. 175 183 176 From http://groups.geni.net/syseng/wiki/ConnectivityProto: Those aggregates that cannot get on the wave but are attached to I2 might be able to configure static IP tunnels (such as Ethernet over GRE) to one of the ProtoGENI switches attached to I2's Layer 3 services.184 From ?: Those aggregates that cannot get on the wave but are attached to I2 might be able to configure static IP tunnels (such as Ethernet over GRE) to one of the ProtoGENI switches attached to I2's Layer 3 services. 177 185 178 186 f) Switched VLANs using Internet2 DCN service. … … 203 211 Setup using Sherpa service. 204 212 205 BEN has used Sherpa to pre-configure VLANs. See http://groups.geni.net/geni/attachment/wiki/ORCABEN/071509c%20%20ORCA_BEN%20demo.pdf , Figure 6-4.213 BEN has used Sherpa to pre-configure VLANs. See [[http://groups.geni.net/geni/attachment/wiki/ORCABEN/071509c%20%20ORCA_BEN%20demo.pdf Figure 6-4]]. 206 214 207 215 ORCA plans to provide an interface into the Sherpa GCI by 2/1/10. … … 214 222 215 223 216 == 4. Configuration of VLAN Connections == 224 == 4. Configuration of VLAN Connections === 217 225 218 226 … … 225 233 • Pre-assigned VLANs through the Duke campus network 226 234 • And then mapped VLAN tags near the endpoint nodes. 227 See http://groups.geni.net/geni/attachment/wiki/ORCABEN/071509c%20%20ORCA_BEN%20demo.pdf , Figures 6-2, 6-3 and 6-4.235 See [[http://groups.geni.net/geni/attachment/wiki/ORCABEN/071509c%20%20ORCA_BEN%20demo.pdf Figures 6-2, 6-3 and 6-4]]. 228 236 229 237 b) In a suggested approach to connectivity specification at http://groups.geni.net/syseng/wiki/RspecConnectivity , it is suggested that: “we give the backbone priority in selecting a network's VLAN ID and aggregates must map the ID within their local network by whatever means is most convenient for them. This way, the experimenter need only know what backbone the aggregate is connected to, and can design the network from there.” 230 238 231 239 232 === 4.2 Static or Dynamic Connections Through Backbone == 240 === 4.2 Static or Dynamic Connections Through Backbone === 233 241 234 242 a) ProtoGENI (Emulab) uses pre-configured (static) VLANs on Internet2 GENI “wave”, between certain Internet2 Wave System nodes. 235 243 See http://www.internet2.edu/waveco/ and http://www.protogeni.net/trac/protogeni/wiki/BackboneNode 236 244 237 b) ORCA/BEN project pre-configured (static) VLANs using NLR FrameNet service. See http://groups.geni.net/geni/attachment/wiki/ORCABEN/071509c%20%20ORCA_BEN%20demo.pdf , Figures 6-2, 6-3 and 6-4.245 b) ORCA/BEN project pre-configured (static) VLANs using NLR FrameNet service. See [http://groups.geni.net/geni/attachment/wiki/ORCABEN/071509c%20%20ORCA_BEN%20demo.pdf Figures 6-2, 6-3 and 6-4]]. 238 246 239 247 These were provisioned using Sherpa service.