Changes between Version 23 and Version 24 of clusterdvlan


Ignore:
Timestamp:
10/28/09 16:51:26 (10 years ago)
Author:
hmussman@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • clusterdvlan

    v23 v24  
    124124VLANs from Starlight L2 crossconnect service in Chicago, to multiple backbone networks, including NLR and Internet2.
    125125
    126 See [http://www.startap.net/starlight/ENGINEERING/SL-TransLight_5.06.pdf ]
    127 
    128 See [http://www.startap.net/starlight/NETWORKS/ ]
     126See http://www.startap.net/starlight/ENGINEERING/SL-TransLight_5.06.pdf
     127
     128See http://www.startap.net/starlight/NETWORKS/
    129129
    130130=== 2.7 LEARN Regional Network ===
     
    148148=== 3.1 Internet2 ===
    149149
    150 a)  See [[http://www.internet2.edu/ ]]
    151 
    152 a)  L3 service
     150a)  See http://www.internet2.edu/
     151
     152b)  L3 service
    153153
    154154Details?
    155155Reach?
    156156
    157 b)  Pre-configured VLANs on GENI “wave”, between certain Internet2 Wave System nodes.    See http://www.internet2.edu/waveco/
    158 
    159 This is the approach being used by ProtoGENI backbone nodes;  see http://www.protogeni.net/trac/protogeni/wiki/BackboneNode
     157c)  Pre-configured VLANs on GENI “wave”, between certain Internet2 Wave System nodes.  See http://www.internet2.edu/waveco/
     158
     159This is the approach being used by ProtoGENI backbone node.  See http://www.protogeni.net/trac/protogeni/wiki/BackboneNode
     160
     161Pt-to-pt?     Multi-point?
     162
     163
     164d)  Direct connections to the Internet2 Wave System nodes. 
     165
     166This is the approach being used by ProtoGENI backbone nodes.  See http://www.protogeni.net/trac/protogeni/wiki/BackboneNode
     167
     168More details on this can be found at http://groups.geni.net/syseng/wiki/ConnectivityProto .  It states that the  ProtoGENI switches (shown below in the IP table) are each attached to the GENI L2 wave but also to I2's Layer 3 network at 1Gb/s.
     169
     170e)  Tunnel to Internet2 Wave System nodes. 
     171
     172From http://groups.geni.net/syseng/wiki/ConnectivityProto :  Those aggregates that cannot get on the wave but are attached to I2 might be able to configure static IP tunnels (such as Ethernet over GRE) to one of the ProtoGENI switches attached to I2's Layer 3 services.
     173
     174f)  Switched VLANs using Internet2 DCN service.
     175
     176The Internet2 DCN service provides switched VLANs, but there are two issues that suggest that it will not be utilized for GENI traffic.   
     177
     178First, its use has not been included in the package of services donated to GENI, and thus there may be a cost to the GENI aggregate now, or in the future.
     179
     180Second, it is available in only a limited number of Internet2 PoPs, and these may be difficult to reach.
     181
     182Currently, ORCA plans to provide an interface into the Internet2 IDC by 2/1/10.
     183
     184
     185=== 3.2 NLR ===
     186
     187a)  See http://www.nlr.net/
     188
     189b)  L3 service  See http://www.nlr.net/packetnet.php
     190
     191Details?
     192Reach?
     193
     194c)  Switched (or pre-configured) VLANs using FrameNet service.  See http://www.nlr.net/framenet.php
    160195
    161196Pt-to-pt?   
    162197Multi-point?
    163198
    164 c)  Direct connections to the Internet2 Wave System nodes. 
    165 
    166 This is the approach being used by ProtoGENI backbone nodes;  see http://www.protogeni.net/trac/protogeni/wiki/BackboneNode
    167 
    168 More details on this can be found at http://groups.geni.net/syseng/wiki/ConnectivityProto .  It states that the  ProtoGENI switches (shown below in the IP table) are each attached to the GENI L2 wave but also to I2's Layer 3 network at 1Gb/s.
    169 
    170 d)  Tunnel to Internet2 Wave System nodes. 
    171 
    172 From http://groups.geni.net/syseng/wiki/ConnectivityProto :  Those aggregates that cannot get on the wave but are attached to I2 might be able to configure static IP tunnels (such as Ethernet over GRE) to one of the ProtoGENI switches attached to I2's Layer 3 services.
    173 
    174 e)  Switched VLANs using Internet2 DCN service.
    175 
    176 The Internet2 DCN service provides switched VLANs, but there are two issues that suggest that it will not be utilized for GENI traffic.   
    177 
    178 First, its use has not been included in the package of services donated to GENI, and thus there may be a cost to the GENI aggregate now, or in the future.
    179 
    180 Second, it is available in only a limited number of Internet2 PoPs, and these may be difficult to reach.
    181 
    182 Currently, ORCA plans to provide an interface into the Internet2 IDC by 2/1/10.
    183 
    184 
    185 2.1 NLR
    186 
    187 See http://www.nlr.net/
    188 
    189 a)  L3 service  See http://www.nlr.net/packetnet.php
    190 
    191 Details?
    192 Reach?
    193 
    194 b)  Switched (or pre-configured) VLANs using FrameNet service.  See http://www.nlr.net/framenet.php
    195 
    196 Pt-to-pt?   
    197 Multi-point?
    198 
    199199Setup using Sherpa service. 
    200200
    201 BEN has used Sherpa to pre-configure VLANs;  see http://groups.geni.net/geni/attachment/wiki/ORCABEN/071509c%20%20ORCA_BEN%20demo.pdf , Figure 6-4.
     201BEN has used Sherpa to pre-configure VLANs.  See http://groups.geni.net/geni/attachment/wiki/ORCABEN/071509c%20%20ORCA_BEN%20demo.pdf , Figure 6-4.
    202202
    203203ORCA plans to provide an interface into the Sherpa GCI by 2/1/10.
    204204
    205 c)  VLANs via C-Wave service?
     205d)  VLANs via C-Wave service?
    206206
    207207Details?