WiMAX Meso-Scale Deployment Integration

1. Projects

Campus deployment projects:
WiMAX at Columbia University
WiMAX at Polytechnic Institute of NYU
WiMAX at UCLA
WiMAX at University of Wisconsin

Open GENI WiMAX Base Station Kit for Campus Deployments
​WIMAX Design and Prototype
​ORBIT Design and Prototype

​OMF (cOntrol and Management Framework)
​ORBIT Testbed
​GENI Projects at WINLAB

​Process for updating Milestones, submitting QSRs

2. Meetings and Demos

Suggested mailing lists for Cluster E and WIMAX Integration participants:
​GENI mailing lists, including the dev, discuss and geni-announce lists, plus working groups that cover your interests.
​mail to cluster-e-admin@winlab.rutgers.edu for PIs. / ​subscribe / ​mailman archieve
​mail to cluster-e-user@winlab.rutgers.edu for users / ​subscribe / ​mailman archieve

​WiMAX Base Station Demo at GEC 6, November 17, 2009

​Cluster E and WiMAX Deployment Meetings at GEC7 March 16 and 17, 2010

3. References and Documents

​WiMAX Concepts and RF Measurements, IEEE 802.16-2004 WiMAX PHY layer operation and measurements, Hewlett Packard Application Note
​GENI WiMAX Project: System Engineering Summary
​API Specification for Virtualized WiMAX Basestation
​D. Raychaudhuri and Editors M. Gerla, “New architectures and disruptive technologies for the future internet: The wireless, mobile and sensor network perspective” Report of NSF Wireless Mobile Planning Group (WMPG) Workshop, August 2005
​Open Base Station Architecture Initiative
​“Android: An Open Handset Alliance Project"
​”NEC’s broadband wireless access products”, NEC Corporation Technical White Paper
​“Wireless virtualization in GENI”, GDD-06-17, 2006

19. Paul, R. Yates, D. Raychaudhuri and J. Kurose, "The Cache-and-Forward Network Architecture for Efficient Mobile Content Delivery Services in the Future Internet", to appear in ITU-T Next Generation Networks (NGN) Conference, Geneva, May 2008.

​OMF (cOntrol and Management Framework)
​ORBIT Testbed
​Current OMF documents
​Cluster E Overview Drawing
​ORBIT diagram
​ORBIT Connectivity
(WiMAX connectivity from WINLAB follows ORBIT connectivity)
OML is a measurement library developed in the context of OMF.
​OML Overview (wiki)
​OML Overview (slides)

4. Planning

4.1 System Engineering

​GENI WiMAX Project: System Engineering Summary

4.2 Campus Deployments

See campus table from 1793 proposal

4.3 Schedule

See high-level schedule Figure 6 from 1793 proposal

5. WiMAX Campus Deployment Kit

Fig 1-1) System Overview

5.1 Configuration

Fig 1-2a) Hardware and Networking

5.2 NEC Hardware

Fig 1-2b) NEC BTS, ODU and Antenna

5.3 Software Modules

Fig 1-3a) Software

5.4 Messages and APIs

Fig 1-3b) Messages and APIs

5.5 Virtualization

Fig 1-4) Virtualization

5.6 Control and Management

Fig 1-5) Control and Management

5.7 Version and Release Compatibility Plan

6. WiMAX Client Platforms

6.1 Options

6.2 PC with WiMAX Client

6.3 Tablet with WiMAX Client

6.4 Handset with WiMAX Client

6.5 Client Plan

7. Campus Installation

​continue

Campus installation steps and status, for each site: Step 1) Identify Outdoor Site on Campus: Planned Started Completed when
Step 2) 2 Obtain FCC License: Planned Started Completed when
Step 3) 3 Identify Indoor Equipment Room on Campus: Planned Started Completed when
Step 4) 4 Install Wiring at Outdoor Site and to Indoor Equipment Room: Planned Started Completed when
Step 5) 5 Install Pole at Outdoor Site and Ground: Planned Started Completed when
Step 6) 6 Install Antenna at Outdoor Site: Planned Started Completed when
Step 7) 7 Install Base Station Outdoor Unit: Planned Started Completed when
Step 8) 8 Complete Wiring at Outdoor Site and to Indoor Equipment Room: Planned Started Completed when
Step 9) 9 Install Indoor Equipment Racks and Ground: Planned Started Completed when
Step 10) 10 Install 120VAC and -48VDC Power Feeds and/or Supplies: Planned Started Completed when
Step 11) 11 Install Base Station Indoor Unit: Planned Started Completed when
Step 12) 12 Complete Wiring of Base Station Indoor Unit: Planned Started Completed when
Step 13) 13 Initial Check-Out of Antenna and Base Station Outdoor and Indoor … : Planned Started Completed when
Step 14) 14 Install Ethernet (VLAN) Switch, or Identify Existing Capacity: Planned Started Completed when
Step 15) 15 Install Linux Server(s) and Software: Planned Started Completed when
Step 16) 16 Connect Backbone Network: Planned Started Completed when
Step 17) 17 Provide Reference Client Platform: Planned Started Completed when
Step 18) 18 Inital Check-Out of Campus WiMAX Testbed: Planned Started Completed when

8. Experimentation

8.1 Standalone Operation using OMF

​ORBIT Experiments (getting started)

8.2 Instrumentation and Measurements using OML

8.3 Multiple Experiments using Virtualization

8.4 Customizing Experiements using Programmability

8.5 Federation with Other Testbeds

​ORBIT to PlanetLab Interoperability