Changes between Version 162 and Version 163 of WiMAXInteg


Ignore:
Timestamp:
04/15/10 15:57:02 (14 years ago)
Author:
hmussman@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WiMAXInteg

    v162 v163  
    355355
    356356The recommended configuration for the ODU is:[[BR]]
    357  ODU mounted outdoors, on roof, with maximum of 4A required at -48VDC[[BR]]
    358  One 10m (approx 30ft) outdoor power cable, two conductors, 12AWG, rated for outdoor use, with [http://www.mouser.com/ProductDetail/Hirose-Electric/JR25WP-4S71/?qs=XQjbzJWzFPXdY8jaH9VFFw%3d%3d ODU Circular Connector], soldered onto cable. [[BR]]
    359  One power supply for ODU, Mean Well [http://www.mouser.com/ProductDetail/Mean-Well/SP-240-48/?qs=sGAEpiMZZMu0oxGuRuNKH0QVy%252bJkdvy3pTeB%252b96yGok%3d SP-200-48], 110VAC input,  -48VDC output, rated 4.2A or 200W, mounted in testbed equipment room, or outdoors on roof, in weathertight enclosure (see UMass Amherst).[[BR]]
     357 * ODU mounted outdoors, on roof, with maximum of 4A required at -48VDC[[BR]]
     358 * One 10m (approx 30ft) outdoor power cable, two conductors, 12AWG, rated for outdoor use, with [http://www.mouser.com/ProductDetail/Hirose-Electric/JR25WP-4S71/?qs=XQjbzJWzFPXdY8jaH9VFFw%3d%3d ODU Circular Connector], soldered onto cable. [[BR]]
     359 * Additional outdoor power cable, two conductors, 12AWG, rated for outdoor use, for connection between the roof and the power supply, typically mounted in the equipment room
     360 * One power supply for ODU, Mean Well [http://www.mouser.com/ProductDetail/Mean-Well/SP-240-48/?qs=sGAEpiMZZMu0oxGuRuNKH0QVy%252bJkdvy3pTeB%252b96yGok%3d SP-200-48], 110VAC input,  -48VDC output, rated 4.2A or 200W, mounted in testbed equipment room, or outdoors on roof, in weather tight enclosure (see UMass Amherst).[[BR]]
     361
     362Typical cable:
     363 * [http://www.americord.com/bulk-cable-65-prod-544.html  250-ft roll of 12/3 SJTW cable, rated for outdoor use]
    360364
    361365The recommended configuration for the IDU is:[[BR]]
    362  IDU mounted indoors, in testbed equipment room, with maximum of 8.4A required at -48VDC (in full configuration with all 3 sector boards).[[BR]]
    363  One 10m (approx 30ft) indoor power cable, two conductors, 10AWG, with one [http://www.mouser.com/ProductDetail/Tyco-Electronics-AMP/1-917807-2/?qs=sGAEpiMZZMufdu5QM0tCwRkkU7pYPyzb IDU Rectangular Power Connector] and four [http://www.mouser.com/ProductDetail/Tyco-Electronics/316041-2/?qs=vsAvTP%252bC%252bzGB86TzaaMK%252bA%3d%3d IDU Rectangular Power Connector Contacts ], two for each of the positive and negative DC power rails, crimped onto cable with a special tool, or soldered. [[BR]]
    364  One power supply for IDU, Mean Well [http://www.mouser.com/ProductDetail/Mean-Well/SP-320-48/?qs=vSyGtvivC8zwzazZzxeJ9g%3d%3d SP-320-48], 110VAC input,  -48VDC output, rated 6.7A or 320W, mounted in tesbed equipment room.  [[BR]]
     366 * IDU mounted indoors, in testbed equipment room, with maximum of 8.4A required at -48VDC (in full configuration with all 3 sector boards).[[BR]]
     367 * One 10m (approx 30ft) indoor power cable, two conductors, 10AWG, with one [http://www.mouser.com/ProductDetail/Tyco-Electronics-AMP/1-917807-2/?qs=sGAEpiMZZMufdu5QM0tCwRkkU7pYPyzb IDU Rectangular Power Connector] and four [http://www.mouser.com/ProductDetail/Tyco-Electronics/316041-2/?qs=vsAvTP%252bC%252bzGB86TzaaMK%252bA%3d%3d IDU Rectangular Power Connector Contacts ], two for each of the positive and negative DC power rails, crimped onto cable with a special tool, or soldered. [[BR]]
     368 * One power supply for IDU, Mean Well [http://www.mouser.com/ProductDetail/Mean-Well/SP-320-48/?qs=vSyGtvivC8zwzazZzxeJ9g%3d%3d SP-320-48], 110VAC input,  -48VDC output, rated 6.7A or 320W, mounted in tesbed equipment room.  [[BR]]
    365369 
    366370=== 6.6  Server Hardware ===