Changes between Version 110 and Version 111 of WiMAXInteg


Ignore:
Timestamp:
02/12/10 17:43:46 (14 years ago)
Author:
hmussman@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WiMAXInteg

    v110 v111  
    192192The recommended configuration for the ODU is:[[BR]]
    193193 ODU mounted outdoors, on roof, with maximum of 4A required at -48VDC[[BR]]
    194  Cable, two conductors, suggested 12AWG, rated for outdoor use, with Hirose [http://www.hirose-connectors.com/connectors/H205SeriesGaiyou.aspx?c1=JR&c3=3  JIS Round Connector, Series JR25WP-4S], 25 mm shell size, waterproof plug with four soldered socket contacts. [[BR]]
    195  Power supply, Mean Well [http://www.meanwell.com/search/SP-200/SP-200-spec.pdf SP-200-48 Single Output Switching Power Supply], 110VAC input,  -48VDC output, rated 4.2A or 200W, mounted in testbed equipment room, or outdoors on roof, in weathertight enclosure.[[BR]]
     194 One 10m (approx 30ft) outdoor power cable, two conductors, 12AWG, rated for outdoor use, with [http://www.mouser.com/ProductDetail/Hirose-Electric/JR25WP-4S71/?qs=XQjbzJWzFPXdY8jaH9VFFw%3d%3d ODU Circular Connector], soldered onto cable. [[BR]]
     195 One power supply for ODU, Mean Well [http://www.mouser.com/ProductDetail/Mean-Well/SP-240-48/?qs=sGAEpiMZZMu0oxGuRuNKH0QVy%252bJkdvy3pTeB%252b96yGok%3d SP-200-48], 110VAC input,  -48VDC output, rated 4.2A or 200W, mounted in testbed equipment room, or outdoors on roof, in weathertight enclosure (see UMass Amherst).[[BR]]
    196196
    197197The recommended configuration for the IDU is:[[BR]]
    198  IDU mounted indoors, in etstbed equipment room, with maximum of 8.4A required at -48VDC (in full configuration with all 3 sector boards).[[BR]]
    199  Cable, two conductors, suggested 10AWG, with Tyco D-5000 series  [http://www.tycoelectronics.com/catalog/bin/TE.Connect?C=1&M=BYPN&BML=&LG=1&PN=3-917807-2&PID=58341 plug housing] and four Tyco D-5000 series [http://www.tycoelectronics.com/catalog/bin/TE.Connect?C=1&M=BYPN&PN=316041-2&I=13 rectangular connectors], two for each of the positive and negative DC power rails, crimped onto cable with a special tool. [[BR]]
    200  Power supply, Mean Well [http://www.meanwell.com/search/SP-320/SP-320-spec.pdf SP-320-48 Single Output Switching Power Supply], 110VAC input,  -48VDC output, rated 6.7A or 320W, monted in tesbed equipment room. [[BR]]
     198 IDU mounted indoors, in testbed equipment room, with maximum of 8.4A required at -48VDC (in full configuration with all 3 sector boards).[[BR]]
     199 One 10m (approx 30ft) indoor power cable, two conductors, 10AWG, with one [http://www.mouser.com/ProductDetail/Tyco-Electronics-AMP/1-917807-2/?qs=sGAEpiMZZMufdu5QM0tCwRkkU7pYPyzb IDU Rectangular Power Connector] and four [http://www.mouser.com/ProductDetail/Tyco-Electronics/316041-2/?qs=vsAvTP%252bC%252bzGB86TzaaMK%252bA%3d%3d IDU Rectangular Power Connector Contacts ], two for each of the positive and negative DC power rails, crimped onto cable with a special tool, or soldered. [[BR]]
     200 One power supply for IDU, Mean Well [http://www.mouser.com/ProductDetail/Mean-Well/SP-320-48/?qs=vSyGtvivC8zwzazZzxeJ9g%3d%3d SP-320-48], 110VAC input,  -48VDC output, rated 6.7A or 320W, mounted in tesbed equipment room. [[BR]]
    201201 
    202202