| | 300 | The second solution has an advantage in deployments for which 110V AC circuit is already available at the chosen outdoor installation location. |
| | 301 | Rated power requirements are 8.4A for IDU (in full configuration with all 3 sector boards) and 4A for ODU. |
| | 302 | |
| | 303 | One possible choice of power supplies is [http://www.meanwell.com Mean Well]: |
| | 304 | |
| | 305 | * Single unit: |
| | 306 | * [http://www.meanwell.com/search/PSP-600/PSP-600-spec.pdf Mean Well PSP-600-48 Single Output Switching Power Supplies 48V 12.5A 600W] |
| | 307 | * Two units: |
| | 308 | * [http://www.meanwell.com/search/SP-320/SP-320-spec.pdf Mean Well SP-320-48 Single Output Switching Power Supplies 48V 6.7A 321.6W] |
| | 309 | * [http://www.meanwell.com/search/SP-200/SP-200-spec.pdf Mean Well SP-200-48 Single Output Switching Power Supplies 48V 4.2A 202.5W ] |
| | 310 | |
| | 311 | |
| | 312 | Power Feed Connections |
| | 313 | |
| | 314 | As outlined in the [http://groups.geni.net/geni/attachment/wiki/WiMAXInteg/CampusInstallation/BS_INSTALLATION.pdf NEC Installation Manual for Base Station (IMN:BS)] the two unit are using the following: |
| | 315 | |
| | 316 | * IDU power feed is based on [http://www.tycoelectronics.com/default.aspx Tyco Electronics / AMP] Dynamic Series D-5000 power connectors with [http://www.tycoelectronics.com/catalog/bin/TE.Connect?C=1&M=BYPN&BML=&LG=1&PN=3-917807-2&PID=58341 plug housing] with 4 [http://www.tycoelectronics.com/catalog/bin/TE.Connect?C=1&M=BYPN&PN=316041-2&I=13 rectangular connectors] (two for each of the positive and negative DC power rails). Suggested wire is 10AWG. |
| | 317 | * ODU power feed is based on [http://www.hirose-connectors.com/ Hirose] JIS Round Connector Series soldering connectors [http://www.hirose-connectors.com/connectors/H205SeriesGaiyou.aspx?c1=JR&c3=3 JR25WP-4S] (25 mm shell size, waterproof plug with 4 soldered socket contacts). Suggested wire is 12AWG. |
