Changes between Version 45 and Version 46 of WiMAXInteg/CampusInstallation


Ignore:
Timestamp:
02/17/10 10:31:11 (14 years ago)
Author:
hmussman@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • WiMAXInteg/CampusInstallation

    v45 v46  
    77
    88The principal contents of the WiMAX base station kit provided by Rutgers WINLAB and NEC are listed here:
    9 
    109 * Antenna, dual-polarization, omnidirectional antenna, for operation in the 2.5GHz range.  Technical specification in Sec 1.2 of [attachment:ANTENNA.pdf NEC Sector Antenna Installation Manual]
    11 
    1210 * Base Station Outdoor Unit, for connection to one antenna.  Technical specification in Sec 3.5 of the [attachment:BS_INSTALLATION.pdf NEC Installation Manual for Base Station (IMN:BS)]
    13 
    1411 * Base Station Indoor Unit, equipped equipped for 1-Sector Configuration, with one Network Interface (NW INTFC) card and one Channel Card (CHC).  Technical specification in Sec 2.6 of the [attachment:BS_INSTALLATION.pdf NEC Installation Manual for Base Station (IMN:BS)]
    15 
    1612 * One Linux Server, including the ASN-GW and ORBIT Mangement Framework software, sufficient for checkout and initial deployment;  may be sufficient for final depoyment configuration.
    1713
     
    2117
    2218The principal items that the campus must provide are listed are:
    23 
    2419 * Outdoor site, with pole for mounting of antenna and Base Station Outdoor Unit.
    25 
    2620 * Indoor site, with racks, for mounting of Base Station Indoor Unit and Linux Servers.
    27 
    2821 * Wiring between sites, preferably in conduit.
    29 
    3022 * Zero to three Linux Servers, to accomodate desired final deployment configuration of the ASN-GW and ORBIT Mangement Framework software.
    31  
    32  * Ethernet switch for multiple VLANs.
    33 
     23  * Ethernet switch for multiple VLANs.
    3424 * -48VDC power supplies for Base Station Outdoor and Indoor Units.
    35 
    3625 * 110VAC feed for Linux Servers, -48VDC power supplies and Ethernet Switch.  Preferably,the 110VAC feed should be provided by a UPS that bridges at least short power gaps.
    3726