Changes between Version 36 and Version 37 of WiMAXInteg/CampusInstallation

Timestamp:

02/08/10 09:45:03 (14 years ago)

Author:

hmussman@bbn.com

Comment:

--

WiMAXInteg/CampusInstallation

@@ -14 +14 @@
  * Base Staion Indoor Unit, equipped equipped for 1-Sector Configuration, with one Network Interface (NW INTFC) card and one Channel Card (CHC).  Technical specification in Sec 2.6 of the [attachment:BS_INSTALLATION.pdf NEC Installation Manual for Base Station (IMN:BS)]
 
-
- * Linux Server, including the ASN-GW and ORBIT Mangement Framework software.
-
-
-ISSUE:  Need complete, detailed list.
+ * One Linux Server, including the ASN-GW and ORBIT Mangement Framework software, sufficient for checkout and initial deployment;  may be sufficient for final depoyment configuration.
+
+
+See ?? for complete, detailed list.
 
 
@@ -29 +28 @@
  * Wiring between sites, preferably in conduit.
 
+ * Zero to three Linux Servers, to accomodate desired final deployment configuration of the ASN-GW and ORBIT Mangement Framework software.
+ 
  * Ethernet switch for multiple VLANs.
 
- * -48VDC power feed, or rectifier, for Base Staion Outdoor and Indoor Units.
+ * -48VDC power supplies for Base Staion Outdoor and Indoor Units.
 
  * 110VAC feed for Linux Servers, -48VDC rectifies (optional) and Ethernet Switch (optional).  Referably,should be provided by a UPS that bridges at least short power gaps.
 
 
-ISSUE:  Need complete list.
+See Section 7.20 for complete, detailed list.
+ 
 
 Once the WiMAX base station kit has been installed on the campus, and is operational, the GPO can arrange the transfer of ownership from the NSF to the university.
@@ -288 +290 @@
 
 === 7.18 Inital Check-Out of Campus WiMAX Testbed ===
+
+===  7.19  Campus Installation Checklist ===
+
+Campus Installation Checklist, for each site [[BR]]
+
+Contact(s):    [[BR]]
+
+
+|| Step || Description || Planned || Started || Completed || Comment ||
+||   1  || Identify Outdoor Site on Campus || - || - || - || ||
+|| 2 || Obtain FCC License || - || - || - || ||
+|| 3 || Identify Indoor Equipment Room on Campus || - || - || - || ||
+|| 4 || Install Wiring at Outdoor Site and to Indoor Equipment Room || - || - || - || ||
+|| 5 || Install Pole at Outdoor Site and Ground  || - || - || - || ||
+|| 6 || Install Antenna at Outdoor Site  || - || - || - || ||
+|| 7 || Install Base Station Outdoor Unit  || - || - || - || ||
+|| 8 || Complete Wiring at Outdoor Site and to Indoor Equipment Room  || - || - || - || ||
+|| 9 || Install Indoor Equipment Racks and Ground  || - || - || - || ||
+|| 10 || Install 120VAC and -48VDC Power Feeds and/or Supplies  || - || - || - || ||
+|| 11 || Install Base Station Indoor Unit  || - || - || - || ||
+|| 12 || Complete Wiring of Base Station Indoor Unit  || - || - || - || ||
+|| 13 || Initial Check-Out of Antenna and Base Station Outdoor and Indoor Units  || - || - || - || ||
+|| 14 || Install Ethernet (VLAN) Switch, or Identify Existing Capacity  || - || - || - || ||
+|| 15 || Install Linux Server(s) and Software || - || - || - || ||
+|| 16 || Connect Backbone Network  || - || - || - || ||
+|| 17 || Provide Reference Client Platform  || - || - || - || ||
+|| 18 || Initial Check-Out of Campus WiMAX Testbed  || - || - || - || ||
+
+
+===  7.20  Campus Bill of Materials ===
+
+
+===  7.21  Campus Installation and Deployment Plan Summary ===