Changes between Version 20 and Version 21 of WiMAXInteg/CampusInstallation


Ignore:
Timestamp:
11/30/09 15:20:13 (12 years ago)
Author:
hmussman@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • WiMAXInteg/CampusInstallation

    v20 v21  
    6969 * Access to Indoor Equipment Room, for power and fiber (signal) cables.  The use of a conduit is preferred, but otherwise the fiber (signal) cables must be mechanically protected.
    7070
    71  * Secure access, to prevent unauthorized people from disrupting installation, or receiving electromagnetic exposure.
     71 * Secure access, to prevent unauthorized people from disrupting operation, or receiving unhealthy electromagnetic exposure.
    7272
    7373NOTE:  It is suggested that this process be started IMMEDIATELY, to assure that an appropriate outdoor site can be identifed.
     
    9292 * Access to backbone network Layer 2 connection.
    9393
    94  * Secure access, to prevent unauthorized people from disrupting installation, or receiving electromagnetic exposure.
     94 * Secure access, to prevent unauthorized people from disrupting operation.
    9595
    9696NOTE:  It is suggested that this process be started IMMEDIATELY, to assure that an appropriate indoor equipment room can be identifed.
     
    9898
    9999
    100 === 7.4  Install Wiring Between Outdoor Site and Indoor Equipment Room ===
     100=== 7.4  Install Wiring at Outdoor Site and to Indoor Equipment Room ===
     101
     102The following cables must be run at the Outdoor Site and between the Outdoor Site and the Indoor Equipment Room:
     103
     104
     105 * Heavy ground cable, from pole to building ground, for lightning protection. 
     106
     107ISSUE:  Does this require a PE?
     108
     109 * Two coaxial cables between (one) Outdoor Unit and (one) Antenna, including lightning protector.  See ?
     110
     111ISSUE:  Does kit contain these cables?
     112
     113 * One -48VDC power cable, from (one) Outdoor Unit to indoor equipment room.  See ?
     114
     115ISSUE:  Does kit contain this cable?
     116
     117 * Two fiber signal cables, from (one) Outdoor Unit to indoor equipment room.  See ?
     118
     119ISSUE:  Does kit contain these cables?
    101120
    102121
     
    120139The installation should be performed by qualified PE to ensure proper grounding and should follow [attachment:BS_INSTALLATION.pdf NEC's installation instructions]
    121140
    122 === 7.8 Complete Wiring of Base Station Outdoor Unit ===
     141=== 7.8 Complete Wiring Between Outdoor Site and Indoor Equipment Room ===
     142
     143
    123144
    124145=== 7.9  Install Indoor Equipment Racks and Ground ===