= Teltonika UM62x1 =

After the device is set up, the USB device will appear as a wired Ethernet device with the IP address of 192.168.0.x.  You can view/configure the settings and connection information from the flash based web frontend at 192.168.0.1.  The default username for the admin end that we will be using is:
{{{
Username:  admin
Password:  admin
}}}

From there, several tabs will show up and one in particular is the CLI (command line interface) that you can run several commands to collect all kinds of information.  A list of commands can be viewed with the help command.

== How To's ==

=== Linux ===

Device will look like a cdrom

{{{
eject
}}}

Can use:

{{{
wget --http-user admin --http-password admin -qO - http://192.168.0.1/cgi/cli?[command]
}}}

=== Embedded Linux ===

Verified working with Openwrt on Routerstation Pro.

TODO:  Complete kernel module list.
Kernel has to be compiled with cdc_ether, scsi cdrom

If using Openwrt, compile busybox with eject command or dmesg to find out what the device shows up as:

{{{
opkg update
opkg install sdparm
sdparm --command=eject /dev/sg?  
}}}

Then use the Linux 

=== Windows ===

Verified working in Windows 7 64-bit

Did not test without installing Teltonika software

Install software when prompted to.

=== Mac OS ===

Verified working under Lion

TODO.