Changes between Version 1 and Version 2 of WIMXUWI/TeltonikaUM62x1


Ignore:
Timestamp:
12/14/11 13:41:10 (8 years ago)
Author:
dmeyer@cs.wisc.edu
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • WIMXUWI/TeltonikaUM62x1

    v1 v2  
    11= Teltonika UM62x1 =
    22
    3 After the device is set up, the USB device will appear as a wired Ethernet device with the IP address of 192.168.0.x.  You can view/configure the settings and connection information from the flash based web frontend at 192.168.0.1.  The default username for the admin end that we will be using is:
    4 {{{
    5 Username:  admin
    6 Password:  admin
    7 }}}
    8 
    9 From there, several tabs will show up and one in particular is the CLI (command line interface) that you can run several commands to collect all kinds of information.  A list of commands can be viewed with the help command.
     3[http://www.teltonika.lt/en/pages/view/?id=1010 Teltonika UM62x1]
    104
    115== How To's ==
     
    2418wget --http-user admin --http-password admin -qO - http://192.168.0.1/cgi/cli?[command]
    2519}}}
     20See data collection below for how to find a list of commands.
    2621
    2722=== Embedded Linux ===
     
    4035}}}
    4136
    42 Then use the Linux
     37Then use the above Linux tutorial.
    4338
    4439=== Windows ===
     
    5550
    5651TODO.
     52
     53== Settings ==
     54
     55After the device is set up, the USB device will appear as a wired Ethernet device with the, dhcp release, IP address of 192.168.0.x.
     56
     571.  Favorite browser ==> 192.168.0.1
     58    a.  The default username for the administrative interface that we will be using is:[[BR]]
     59   Username:  admin[[BR]]
     60   Password:  admin
     612.  Configure Wimax
     62    a.  Click on WiMAX tab
     63    b.  Click on Channels sub-tab
     64    c.  Add your base station(s) information
     653.  Verify connectivity
     66
     67Note that your settings are stored on the device, so this will only have to be done once for each device.
     68
     69== Data collection ==
     70
     71One tab I would like to point out is the CLI (command line interface) that you can run several commands to collect all kinds of information.  A list of commands can be viewed with the help command.
     72
     73
     74