[[PageOutline]]

== Project Number ==

1731

== Project Title ==

WiMax Deployment in the DOME and ViSE Testbeds and Cluster-D Framework[[BR]]
a.k.a WIMXUMASS

=== Technical Contacts ===

PI: Mark Corner, UMass Amherst, mcorner email at cs.umass.edu [[BR]]
Research Staff:  Brian Lynn,  UMass Amherst, blynn email at cs.umass.edu [[BR]]

=== Participating Organizations ===

[http://prisms.cs.umass.edu/  University of Massachsetts at Amherst CS Dept.][[BR]]


=== GPO Liaison System Engineer ===

Harry Mussman  hmussman@geni.net


== Scope ==

This project will deploy an NEC WiMax base station (provided by Rutgers through an associated WiMax base station proposal) on a building located at UMass Amherst, and deploy WiMax client stations on mobile vehicles to enhance our existing GENI DOME testbed.

=== Current Capabilities ===


=== Milestones ===

[[MilestoneDate(WIMXCOLUM: S2.a WiMax base station installed and operational)]][[BR]]

=== Campus Installation Checklist ===

UMass Amherst [[BR]]

Contact(s):  [[BR]]
PI: Mark Corner, UMass Amherst, mcorner email at cs.umass.edu [[BR]]
Research Staff:  Brian Lynn,  UMass Amherst, blynn email at cs.umass.edu [[BR]]

Step 1)  Identify Outdoor Site on Campus:    planned/started/completed x/x/10 [[BR]]

Step 2)  Obtain FCC License:  Started 12/09 mc;  pending [[BR]]

Step 3)  Identify Indoor Equipment Room on Campus:  planned/started/completed x/x/10 [[BR]]

Step 4)  Install Wiring at Outdoor Site and to Indoor Equipment Room:  planned/started/completed x/x/10 [[BR]]

Step 5)  Install Pole at Outdoor Site and Ground:  planned/started/completed x/x/10 [[BR]]

Step 6)  Install Antenna at Outdoor Site:  planned/started/completed x/x/10 [[BR]]

Step 7)  Install Base Station Outdoor Unit:  planned/started/completed x/x/10 [[BR]]

Step 8)  Complete Wiring at Outdoor Site and to Indoor Equipment Room:  planned/started/completed x/x/10 [[BR]]

Step 9)  Install Indoor Equipment Racks and Ground:  planned/started/completed x/x/10 [[BR]]

Step 10)  Install 120VAC and -48VDC Power Feeds and/or Supplies:  planned/started/completed x/x/10 [[BR]]

Step 11)  Install Base Station Indoor Unit:  planned/started/completed x/x/10 [[BR]]

Step 12)  Complete Wiring of Base Station Indoor Unit:  planned/started/completed x/x/10 [[BR]]

Step 13)  Initial Check-Out of Antenna and Base Station Outdoor and Indoor Units:  planned/started/completed x/x/10 [[BR]]

Step 14)  Install Ethernet (VLAN) Switch, or Identify Existing Capacity:  planned/started/completed x/x/10 [[BR]]

Step 15)  Install Linux Server(s) and Software:  planned/started/completed x/x/10 [[BR]]

Step 16)  Connect Backbone Network:  planned/started/completed x/x/10 [[BR]]

Step 17)  Provide Reference Client Platform:  planned/started/completed x/x/10 [[BR]]

Step 18)  Inital Check-Out of Campus WiMAX Testbed:  planned/started/completed x/x/10 [[BR]]

== Project Technical Documents ==


=== Quarterly Status Reports ===


=== Spiral 2 Connectivity ===

=== Related Projects ===

[wiki:WIMXRG  Open GENI WiMAX Base Station Kit for Campus Deployments][[BR]]