[[PageOutline]]

== Project Number ==

1768

== Project Title ==

Deploying GENI WiMax in Colorado[[BR]]
a.k.a WIMXUCO

=== Technical Contacts ===

PI: Dirk Grunwald  Dirk.Grunwald@Colorado.edu [[BR]]

=== Participating Organizations ===

[http://www.cs.colorado.edu/  University of Colorado at Boulder CS Dept.][[BR]]


=== GPO Liaison System Engineer ===

Harry Mussman  hmussman@geni.net


== Scope ==

This proposal will install and maintain a programmable WiMax base station at one of the existing University of Colorado Wide-Area Radio Testbed (WART) wireless network sites.  It will use a “GENI WiMax Base Station Kit” provided by Rutgers.

=== Current Capabilities ===


=== Milestones ===

[[MilestoneDate(WIMXCOLUM: S2.a Redesign remote management/power system)]][[BR]]
[[MilestoneDate(WIMXCOLUM: S2.b Install the WiMax base station kit and antennas)]][[BR]]

=== Campus Installation Checklist ===

University of Colorado at Boulder [[BR]]

Contact(s):  [[BR]]
PI: Dirk Grunwald  Dirk.Grunwald@Colorado.edu [[BR]]

Step 1)  Identify Outdoor Site on Campus:    planned/started/completed x/x/10 [[BR]]

Step 2)  Obtain FCC License:  planned/started/completed x/x/10 [[BR]]

Step 3)  Identify Indoor Equipment Room on Campus:  planned/started/completed x/x/10 [[BR]]

Step 4)  Install Wiring at Outdoor Site and to Indoor Equipment Room:  planned/started/completed x/x/10 [[BR]]

Step 5)  Install Pole at Outdoor Site and Ground:  planned/started/completed x/x/10 [[BR]]

Step 6)  Install Antenna at Outdoor Site:  planned/started/completed x/x/10 [[BR]]

Step 7)  Install Base Station Outdoor Unit:  planned/started/completed x/x/10 [[BR]]

Step 8)  Complete Wiring at Outdoor Site and to Indoor Equipment Room:  planned/started/completed x/x/10 [[BR]]

Step 9)  Install Indoor Equipment Racks and Ground:  planned/started/completed x/x/10 [[BR]]

Step 10)  Install 120VAC and -48VDC Power Feeds and/or Supplies:  planned/started/completed x/x/10 [[BR]]

Step 11)  Install Base Station Indoor Unit:  planned/started/completed x/x/10 [[BR]]

Step 12)  Complete Wiring of Base Station Indoor Unit:  planned/started/completed x/x/10 [[BR]]

Step 13)  Initial Check-Out of Antenna and Base Station Outdoor and Indoor Units:  planned/started/completed x/x/10 [[BR]]

Step 14)  Install Ethernet (VLAN) Switch, or Identify Existing Capacity:  planned/started/completed x/x/10 [[BR]]

Step 15)  Install Linux Server(s) and Software:  planned/started/completed x/x/10 [[BR]]

Step 16)  Connect Backbone Network:  planned/started/completed x/x/10 [[BR]]

Step 17)  Provide Reference Client Platform:  planned/started/completed x/x/10 [[BR]]

Step 18)  Inital Check-Out of Campus WiMAX Testbed:  planned/started/completed x/x/10 [[BR]]


== Project Technical Documents ==


=== Quarterly Status Reports ===


=== Spiral 2 Connectivity ===

=== Related Projects ===

[wiki:WIMXRG  Open GENI WiMAX Base Station Kit for Campus Deployments][[BR]]