wiki:Tutorials/Layer2Ping/Procedure/DesignSetup

Version 5 (modified by rrhain@bbn.com, 9 years ago) (diff)

--

Layer2Ping or PingPlus Exercise

Image Map

1. Design the Experiment

In today's experiment you will use resources from the aggregate listed on your worksheet.

1.1 Obtain Resources

You can use the portal, Jacks, or Omni to create your slice and allocate resources. The instructions here assume you are using Jacks.

Create a slice or use an existing slice.

1.2 Reserve Two Virtual Machines at One Aggregate

We will use the topology if two nodes connected by a link.

The RSpec you will need is at http://www.gpolab.bbn.com/experiment-support/PingPlus/pingPlus.rspec.

You can import this RSpec directly via the portal, into Jacks, or use it with Omni. Please use the same aggregate (rack) you used for your other exercises.

Wait until the Jacks canvas turns green. If you are using Omni, wait until readyToLogin.py tells you your resources are ready and gives you ssh commands you can use to log into your nodes. If you are using the portal, wait until the slice page tells you that your resources are ready and you can get your login details via the "Details" button.

1.3 Note the ssh information for the server and client nodes

In you worksheet, write down the IP addresses and port numbers used to ssh into the server and client nodes.


Introduction

Next: Execute