= Instrumentation and Measurement using GEMINI =
== Overview: ==
{{{
#!html
<img src="http://groups.geni.net/geni/attachment/wiki/GEC17Agenda/GettingStartedWithGENI_I/Graphics/2vmvlan_overview.png?format=raw" height="152" alt="Tutorial Setup"/>
}}}

Set up a simple experiment topology using a pre-made RSpec.

Turn on instrumentation.

View measurements using the GENI Desktop.

== Prerequisites: ==

In order to participate in this tutorial you need to have an account at an InCommon institution or from the GPO. If you haven't done so before, please [http://groups.geni.net/geni/wiki/SignMeUpPortal sign in to the GENI Portal]. 

Make sure you know which institution will provide you access to GENI and the username and password you need to authenticate. If you don't know, please let us know. 
     
== Tools: ==

 * [https://portal.geni.net GENI Experimenter Portal]
 * Flack
 * [https://genidesktop.netlab.uky.edu GENI Desktop]

== Where to get help: ==

GENI: [mailto:help@geni.net help@geni.net]

== Resources: ==
 * Four virtual machines at one GENI rack

== Tutorial Instructions ==
{{{
#!html


<table id="Table_01" height="409" border="0" cellpadding="0" cellspacing="0">
	<tr>
		<td>
			<a href="./Procedure/DesignSetup"><img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/design.png?format=raw" width="152" height="152" alt="Design/Setup"></a>
               </td>
               <td>
<ul> 
             <li><a href="./Procedure/DesignSetup">Part I: Design/Setup</a></li>
             <ul>
                 <li>Step 1: Get Ready to use the GENI Desktop </li>
                 <li>Step 2: Set up experiment topology </li>
                 <li>Step 3: TAdd GEMINI Extensions and Reserve Resources </li>
             </ul></ul>
               </td>
	</tr>
	<tr>
		<td>
			<a href="./Procedure/Execute"><img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/execute.png?format=raw" width="152" height="143" alt="Execute"></a>
                </td>
		<td>
             <ul>
<li><a href="./Procedure/Execute">Part II: Execute</a></li>
             <ul> 
                 <li>Step 4:  Log into the GENI Desktop </li>
                 <li>Step 5:  Instrumentize Slice </li>
                 <li>Step 6:  View Measurement Data </li>
             </ul></ul>
                </td>
	</tr>
	<tr>
		<td>
			<a href="./Procedure/Finish"><img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/finish.png?format=raw" width="152" height="114" alt="Finish"></a>
                </td>

		<td>
             <ul>
             <li><a href="./Procedure/Finish">Part III: Finish</a></li>
             <ul>
                 <li>Step 7:  Teardown Experiment</li>
             </ul></ul>
                </td>

	</tr>
</table>