== 4. Log into the GENI Desktop == === 4a. Go back to your browser tab labeled GENI Portal. === === 4b. Select the tool '''GENI Desktop'''. === [[Image(Tutorials/ICDCS2013/GEMINI/figures:OpenGENIDesktop.tiff, 75%)]] === 4c. Click on the "Continue to the GENI Desktop" Button. === * Your automatically generated key does not have a passphrase. Don't type anything in the box labeled "SSH Key Passphrase". * The GENI Desktop will find your slice and will "initialize" it. This will take a few minutes. When it is done you should see the resources in your slice. == 5. Instrumentize your Slice == === 5a. Click on the button labeled "Instrumentize" === [[Image(Tutorials/ICDCS2013/GEMINI/figures:Instrumentize.tiff, 75%)]] * Instrumentation takes a while. When it is done you will see: [[Image(Tutorials/ICDCS2013/GEMINI/figures:InstrumentationDone.tiff, 75%)]] === 5b. Select the Measurements to be Enabled === * Select the node for which you want to view measurement data. * Click on the "Launcher" (button with the rocket icon) and then select "GEMINI Graphs". * Select the measurements you'd like to see. For this tutorial we'll use the default selections. [[Image(Tutorials/ICDCS2013/GEMINI/figures:Launcher.tiff, 75%)]] == 6. View Measurement Data == * Click on "Add Graphs with Title". You should see the measurement for the selected node. [[Image(Tutorials/ICDCS2013/GEMINI/figures:ViewGraphs.tiff, 75%)]] * To see measurements for a different node, select that node and repeat Steps 5b and 6. == [wiki:Tutorials/ICDCS2013/GEMINI/Procedure/Finish Teardown Experiment] ==