Changes between Version 5 and Version 6 of SiteNlr

Timestamp:

06/22/10 23:54:20 (14 years ago)

Author:

jwilliams@bbn.com

Comment:

--

SiteNlr

@@ -31 +31 @@
 Once this is complete, the NLR NOC [mailto:noc@nlr.net <noc@nlr.net>] will work with you to setup the appropriate accounts and access needed for your project.
 
-=== Initial Connections ===
-From the [attachment:200909-IS-ION-HowTo.pdf ION HowTo]:
->The first step to take advantage of ION service is to interconnect with the Internet2 ION infrastructure via a 1GigE or 10GigE Ethernet connection. The logistics of that connection will be handled as part of the turnup process.
-
-
 == Establishing an !FrameNet Sherpa Web Service Account ==
 From the [http://globalnoc.iu.edu/nlr/maps_documentation/nlr-framenet-documentation.html !FrameNet documentation]:
@@ -42 +37 @@
 
 == VLAN Provisioning Within !FrameNet ==
-
 This section outlines Provisioning within Sherpa. For the complete procedure of provisioning a VLAN between two sites see ConnectivityGuidelines.
 
-Once you have an ION account you will be able to provision VLANs between site's endpoints using the [https://ion.net.internet2.edu:8443/ion/# ION VLAN provisioning webpage].
+Once you have an Sherpa account you will be able to provision VLANs between site's endpoints using the [https://sherpa.nlr.net/add/a_end.html  !FrameNet VLAN provisioning webpage].
 
 You cannot create VLANs to arbitrary endpoints locations, but only to those endpoints which you have permission to access. This is a manual process in which someone contacts the SHERPA account holders at both endpoints and gets permission. Once that permission step has been accomplished, the other endpoint will show up as a valid choice in the SHERPA "Z End" dialogue.
@@ -67 +61 @@
 
 
+{{{
+#!comment
+Please don't edit below this line - Thanks!
+}}}
+----
+Back to [wiki:SiteIndex]
+{{{
+#!html
+<a href="mailto:jwilliams@geni.net?subject=[GENI site] SiteBbn question">Email us</a> with questions and feedback on this page!
+}}}