Changes between Version 13 and Version 14 of SarahEdwards/GettingStarted_PartII_ccn/Procedure/Setup

Timestamp:

06/11/15 21:08:43 (9 years ago)

Author:

sedwards@bbn.com

Comment:

--

SarahEdwards/GettingStarted_PartII_ccn/Procedure/Setup

@@ -270 +270 @@
 <li>Click on the <tt>user</tt> node. </li>
 <li>Press the <b>Duplicate Nodes Only</b> button. </li>
-<li>A node <tt>user-1</tt> should appear. Look at the install and execute scripts.  They should be the same as on the original <tt>user</tt> node.</li>
+<li>A node <tt>user-0</tt> should appear. Look at the install and execute scripts.  They should be the same as on the original <tt>user</tt> node.</li>
 </ul>
      </li>
@@ -288 +288 @@
   <ol type='a' start='4'>
      <li>Draw a link between the two <tt>ccnx-router</tt> nodes.</li>
-     <li>Draw another link between the new <tt>ccnx-router</tt> nodes and the <tt>user-1</tt> node.</li>
+     <li>Draw another link between the new <tt>ccnx-router</tt> nodes and the <tt>user-0</tt> node.</li>
      <li>The topology should look like Figure 3-4</li>
   </ol>
@@ -309 +309 @@
 <pre>add-precip-routes NEXT_HOP_NODE</pre>
 <br/><br/>
-Edit the new <tt>ccnx-router-2</tt> node to point to <tt>ccnx-router</tt>.
+Edit the new <tt>ccnx-router-1</tt> node to point to <tt>ccnx-router</tt>.
 <br/><br/>
 The new <tt>add-precip-routes</tt> execute command on <b>ccnx-router-1</b> should be:
@@ -327 +327 @@
   <img src="http://groups.geni.net/geni/raw-attachment/wiki/GENIEducation/SampleAssignments/LabZero/Graphics/JacksLab1_22_v2.png" width='500'/>
      <br />
-     <b>Figure 3-5</b> <i>Edit the next hop on <tt>ccnx-router-2</tt> and <tt>user-1</tt>.</i>
+     <b>Figure 3-5</b> <i>Edit the next hop on <tt>ccnx-router-1</tt> and <tt>user-0</tt>.</i>
 </td>
 </tr>