Changes between Version 3 and Version 4 of PlasticSlices/MonitoringRecommendations/PgeniSharedConfiguration


Ignore:
Timestamp:
07/03/12 18:04:30 (7 years ago)
Author:
chaos@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • PlasticSlices/MonitoringRecommendations/PgeniSharedConfiguration

    v3 v4  
    77This page explains how to configure an OpenVZ-based ProtoGENI shared node for GMOC monitoring.  This page was written for
    88{{{
    9 tango-monitor-pgenishared-0.1-0dev2
     9tango-monitor-pgenishared-0.1-1
    1010}}}
    1111which is the latest version of the monitoring utilities for a ProtoGENI shared node running Fedora.
     
    4040=== II. Install the monitoring software ===
    4141
    42  1. Download `tango-monitor-pgenishared-0.1-0dev2.noarch.rpm` from [http://software.geni.net/local-sw/], and copy it onto your node, e.g. into `~/tango-monitor-pgenishared-0.1-0dev2.noarch.rpm`.
     42 1. Download `tango-monitor-pgenishared-0.1-1.noarch.rpm` from [http://software.geni.net/local-sw/], and copy it onto your node, e.g. into `~/tango-monitor-pgenishared-0.1-1.noarch.rpm`.
    4343
    4444 2. Use yum localinstall to install the RPM and any necessary dependencies:
    4545{{{
    46 sudo yum --nogpgcheck localinstall ~/tango-monitor-pgenishared-0.1-0dev2.noarch.rpm
     46sudo yum --nogpgcheck localinstall ~/tango-monitor-pgenishared-0.1-1.noarch.rpm
    4747}}}
    4848