Changes between Version 8 and Version 9 of PlasticSlices/MonitoringRecommendations/FlowvisorConfiguration
- Timestamp:
- 05/12/11 11:26:30 (13 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
PlasticSlices/MonitoringRecommendations/FlowvisorConfiguration
v8 v9 7 7 This page explains how to configure an !OpenFlow !FlowVisor node for the [wiki:PlasticSlices/MonitoringRecommendations Plastic Slices central monitoring configuration]. Before following these instructions, please ask GPO infra for a copy of the tarball 8 8 {{{ 9 plastic-slices-monitor-flowvisor-0. 2.tar.gz9 plastic-slices-monitor-flowvisor-0.3.tar.gz 10 10 }}} 11 11 which is the latest version of the monitoring utilities for a !FlowVisor. We have tested the !FlowVisor utilities on Ubuntu 10.04 only. If you are running a different OS and it is not obvious how to translate the instructions, please contact GPO infra. … … 19 19 == Steps == 20 20 21 1. Copy the tarball over to your FV host, e.g. into `~/plastic-slices-monitor-flowvisor-0. 2.tar.gz`.21 1. Copy the tarball over to your FV host, e.g. into `~/plastic-slices-monitor-flowvisor-0.3.tar.gz`. 22 22 23 23 2. Unpack the tarball in `/`: 24 24 {{{ 25 25 cd / 26 sudo tar xvzf ~/plastic-slices-monitor-flowvisor-0. 2.tar.gz26 sudo tar xvzf ~/plastic-slices-monitor-flowvisor-0.3.tar.gz 27 27 }}} 28 28 This should create the following files: