Version 2 (modified by 13 years ago) (diff) | ,
---|
Template
Here's a template of the ten slices, for putting into pages for each round.
plastic-101
SteadyPing, using interval=.006, and this table of client/server pairs:
client | server | server address |
ganel.gpolab.bbn.com | planetlab5.clemson.edu | server=10.42.101.105 |
planetlab4.clemson.edu | plnode2.cip.gatech.edu | server=10.42.101.101 |
plnode1.cip.gatech.edu | pl5.myplc.grnoc.iu.edu | server=10.42.101.73 |
pl4.myplc.grnoc.iu.edu | orbitplc2.orbit-lab.org | server=10.42.101.112 |
orbitplc1.orbit-lab.org | of-planet2.stanford.edu | server=10.42.101.91 |
of-planet1.stanford.edu | pl02.cs.washington.edu | server=10.42.101.81 |
pl01.cs.washington.edu | wings-openflow-3.wail.wisc.edu | server=10.42.101.96 |
wings-openflow-2.wail.wisc.edu | gardil.gpolab.bbn.com | server=10.42.101.52 |
Commands run on each client
server=<ipaddr> sudo ping -i .006 -s $((1500-8-20)) $server
Results
Generated from the logs with
subnet=101 for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 2 statistics pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
Analysis
(forthcoming)
plastic-102
SteadyPing, using interval=.006, and this table of client/server pairs:
client | server | server address |
navis.gpolab.bbn.com | planetlab4.clemson.edu | server=10.42.102.104 |
planetlab5.clemson.edu | plnode1.cip.gatech.edu | server=10.42.102.100 |
plnode2.cip.gatech.edu | pl4.myplc.grnoc.iu.edu | server=10.42.102.72 |
pl5.myplc.grnoc.iu.edu | orbitplc1.orbit-lab.org | server=10.42.102.111 |
orbitplc2.orbit-lab.org | of-planet2.stanford.edu | server=10.42.102.91 |
of-planet1.stanford.edu | pl01.cs.washington.edu | server=10.42.102.80 |
pl02.cs.washington.edu | wings-openflow-2.wail.wisc.edu | server=10.42.102.95 |
wings-openflow-3.wail.wisc.edu | bain.gpolab.bbn.com | server=10.42.102.54 |
Commands run on each client
server=<ipaddr> sudo ping -i .006 -s $((1500-8-20)) $server
Results
Generated from the logs with
subnet=102 for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 2 statistics pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
Analysis
(forthcoming)
plastic-103
SteadyPerf TCP, using port=5103, time=518400, and this table of client/server pairs:
client | server | server address |
of-planet1.stanford.edu | ganel.gpolab.bbn.com | server=10.42.103.51 |
gardil.gpolab.bbn.com | orbitplc1.orbit-lab.org | server=10.42.103.111 |
pl02.cs.washington.edu | sardis.gpolab.bbn.com | server=10.42.103.53 |
orbitplc2.orbit-lab.org | pl01.cs.washington.edu | server=10.42.103.80 |
One-time prep commands run on each client and server
sudo yum -y install iperf
Commands run on each server
server=<ipaddr> nice -n 19 iperf -B $server -p 5103 -s -i 1
Commands run on each client
server=<ipaddr> nice -n 19 iperf -c $server -p 5103 -t 518400
Results
Generated with
subnet=103 for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -a -A 5 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
and then edited slightly to remove artifacts (like control characters, my prompt, etc).
Analysis
(forthcoming)
plastic-104
SteadyPerf UDP, using port=5104, time=518400, rate=3, and this table of client/server pairs:
client | server | server address |
ganel.gpolab.bbn.com | wings-openflow-2.wail.wisc.edu | server=10.42.104.95 |
wings-openflow-3.wail.wisc.edu | orbitplc2.orbit-lab.org | server=10.42.104.112 |
orbitplc1.orbit-lab.org | pl4.myplc.grnoc.iu.edu | server=10.42.104.72 |
pl5.myplc.grnoc.iu.edu | sardis.gpolab.bbn.com | server=10.42.104.53 |
One-time prep commands run on each client and server
sudo yum -y install iperf
Commands run on each server
server=<ipaddr> nice -n 19 iperf -u -B $server -p 5104 -s -i 1
Commands run on each client
server=<ipaddr> nice -n 19 iperf -u -c $server -p 5104 -t 518400 -b 3M
Results
Generated with
subnet=104 for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
and then edited slightly to remove artifacts (like control characters, my prompt, etc).
Analysis
(forthcoming)
plastic-105
SteadyPerf TCP, using port=5105, time=518400, and this table of client/server pairs:
client | server | server address |
wings-openflow-2.wail.wisc.edu | planetlab5.clemson.edu | server=10.42.105.105 |
planetlab4.clemson.edu | navis.gpolab.bbn.com | server=10.42.105.55 |
bain.gpolab.bbn.com | plnode2.cip.gatech.edu | server=10.42.105.101 |
plnode1.cip.gatech.edu | wings-openflow-3.wail.wisc.edu | server=10.42.105.96 |
One-time prep commands run on each client and server
sudo yum -y install iperf
Commands run on each server
server=<ipaddr> nice -n 19 iperf -B $server -p 5105 -s -i 1
Commands run on each client
server=<ipaddr> nice -n 19 iperf -c $server -p 5105 -t 518400
Results
Generated with
subnet=105 for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 5 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
and then edited slightly to remove artifacts (like control characters, my prompt, etc).
Analysis
(forthcoming)
plastic-106
SteadyPerf UDP, using port=5106, time=518400, rate=3, and this table of client/server pairs:
client | server | server address |
planetlab5.clemson.edu | wings-openflow-2.wail.wisc.edu | server=10.42.106.95 |
wings-openflow-3.wail.wisc.edu | plnode1.cip.gatech.edu | server=10.42.106.100 |
plnode2.cip.gatech.edu | bain.gpolab.bbn.com | server=10.42.106.54 |
navis.gpolab.bbn.com | planetlab4.clemson.edu | server=10.42.106.104 |
One-time prep commands run on each client and server
sudo yum -y install iperf
Commands run on each server
server=<ipaddr> nice -n 19 iperf -u -B $server -p 5106 -s -i 1
Commands run on each client
server=<ipaddr> nice -n 19 iperf -u -c $server -p 5106 -t 518400 -b 3M
Results
Generated with
subnet=106 for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
and then edited slightly to remove artifacts (like control characters, my prompt, etc).
Analysis
(forthcoming)
plastic-107
SteadyWeb, using port=4107, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:
client | server | server address |
planetlab5.clemson.edu | pl4.myplc.grnoc.iu.edu | server=10.42.107.72 |
pl5.myplc.grnoc.iu.edu | plnode2.cip.gatech.edu | server=10.42.107.101 |
plnode1.cip.gatech.edu | pl02.cs.washington.edu | server=10.42.107.81 |
pl01.cs.washington.edu | planetlab4.clemson.edu | server=10.42.107.104 |
One-time prep commands run on each server
sudo yum -y install pyOpenSSL patch cd rm -rf ~/gigaweb mkdir -p ~/gigaweb/docroot cd ~/gigaweb wget http://code.activestate.com/recipes/442473-simple-http-server-supporting-ssl-secure-communica/download/1/ -O httpsd.py wget http://groups.geni.net/geni/attachment/wiki/PlasticSlices/Experiments/httpsd.py.patch?format=raw -O httpsd.py.patch patch httpsd.py httpsd.py.patch rm httpsd.py.patch cd ~/gigaweb/docroot wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc cd ~/gigaweb openssl genrsa -passout pass:localhost -des3 -rand /dev/urandom -out localhost.localdomain.key 1024 openssl req -subj /CN=localhost.localdomain -passin pass:localhost -new -key localhost.localdomain.key -out localhost.localdomain.csr openssl x509 -passin pass:localhost -req -days 3650 -in localhost.localdomain.csr -signkey localhost.localdomain.key -out localhost.localdomain.crt openssl rsa -passin pass:localhost -in localhost.localdomain.key -out decrypted.localhost.localdomain.key mv -f decrypted.localhost.localdomain.key localhost.localdomain.key cat localhost.localdomain.key localhost.localdomain.crt > localhost.localdomain.pem rm localhost.localdomain.key localhost.localdomain.crt localhost.localdomain.csr
Commands run on each server
server=<ipaddr> cd ~/gigaweb/docroot python ../httpsd.py $server 4107
Commands run on each client
server=<ipaddr> cd rm -rf ~/gigaweb mkdir ~/gigaweb cd ~/gigaweb while true ; do wget --no-check-certificate https://$server:4107/substrate.doc -O substrate.doc ; echo -n "md5sum: " ; md5sum substrate.doc ; rm substrate.doc ; done
Results
Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.
Generated with
subnet=107 for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "md5sum:" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "md5sum: d4fcf71833327fbfef98be09deef8bfb" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done
Analysis
(forthcoming)
plastic-108
SteadyWeb, using port=4108, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:
client | server | server address |
wings-openflow-3.wail.wisc.edu | of-planet2.stanford.edu | server=10.42.108.91 |
of-planet1.stanford.edu | orbitplc1.orbit-lab.org | server=10.42.108.111 |
orbitplc2.orbit-lab.org | pl5.myplc.grnoc.iu.edu | server=10.42.108.73 |
pl4.myplc.grnoc.iu.edu | wings-openflow-2.wail.wisc.edu | server=10.42.108.95 |
One-time prep commands run on each server
sudo yum -y install pyOpenSSL patch cd rm -rf ~/gigaweb mkdir -p ~/gigaweb/docroot cd ~/gigaweb wget http://code.activestate.com/recipes/442473-simple-http-server-supporting-ssl-secure-communica/download/1/ -O httpsd.py wget http://groups.geni.net/geni/attachment/wiki/PlasticSlices/Experiments/httpsd.py.patch?format=raw -O httpsd.py.patch patch httpsd.py httpsd.py.patch rm httpsd.py.patch cd ~/gigaweb/docroot wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc cd ~/gigaweb openssl genrsa -passout pass:localhost -des3 -rand /dev/urandom -out localhost.localdomain.key 1024 openssl req -subj /CN=localhost.localdomain -passin pass:localhost -new -key localhost.localdomain.key -out localhost.localdomain.csr openssl x509 -passin pass:localhost -req -days 3650 -in localhost.localdomain.csr -signkey localhost.localdomain.key -out localhost.localdomain.crt openssl rsa -passin pass:localhost -in localhost.localdomain.key -out decrypted.localhost.localdomain.key mv -f decrypted.localhost.localdomain.key localhost.localdomain.key cat localhost.localdomain.key localhost.localdomain.crt > localhost.localdomain.pem rm localhost.localdomain.key localhost.localdomain.crt localhost.localdomain.csr
Commands run on each server
server=<ipaddr> cd ~/gigaweb/docroot python ../httpsd.py $server 4108
Commands run on each client
server=<ipaddr> cd rm -rf ~/gigaweb mkdir ~/gigaweb cd ~/gigaweb while true ; do wget --no-check-certificate https://$server:4108/substrate.doc -O substrate.doc ; echo -n "md5sum: " ; md5sum substrate.doc ; rm substrate.doc ; done
Results
Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.
Generated with
subnet=108 for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "md5sum:" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "md5sum: d4fcf71833327fbfef98be09deef8bfb" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done
Analysis
(forthcoming)
plastic-109
SteadyNetcat, using port=6109, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:
client | server | server address |
gardil.gpolab.bbn.com | pl5.myplc.grnoc.iu.edu | server=10.42.109.73 |
pl4.myplc.grnoc.iu.edu | pl02.cs.washington.edu | server=10.42.109.81 |
pl01.cs.washington.edu | planetlab5.clemson.edu | server=10.42.109.105 |
planetlab4.clemson.edu | of-planet1.stanford.edu | server=10.42.109.90 |
of-planet2.stanford.edu | wings-openflow-3.wail.wisc.edu | server=10.42.109.96 |
wings-openflow-2.wail.wisc.edu | ganel.gpolab.bbn.com | server=10.42.109.51 |
One-time prep commands run on each server
sudo yum -y install nc mkdir -p ~/giganetcat cd ~/giganetcat wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc
One-time prep commands run on each client
sudo yum -y install nc
Commands run on each server
server=<ipaddr> cd ~/giganetcat while true ; do nc -l $server 6109 < substrate.doc ; done
Commands run on each client
server=<ipaddr> cd rm -rf ~/giganetcat mkdir ~/giganetcat cd ~/giganetcat while true ; do nc $server 6109 > substrate.doc ; echo -n "$(date "+%F %T") " ; md5sum substrate.doc ; rm substrate.doc ; done
Results
Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.
Generated with
subnet=109 for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "d4fcf71833327fbfef98be09deef8bfb substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done
Analysis
(forthcoming)
plastic-110
SteadyNetcat, using port=6110, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:
client | server | server address |
bain.gpolab.bbn.com | pl01.cs.washington.edu | server=10.42.110.80 |
pl02.cs.washington.edu | of-planet1.stanford.edu | server=10.42.110.90 |
of-planet2.stanford.edu | orbitplc2.orbit-lab.org | server=10.42.110.112 |
orbitplc1.orbit-lab.org | pl4.myplc.grnoc.iu.edu | server=10.42.110.72 |
pl5.myplc.grnoc.iu.edu | plnode1.cip.gatech.edu | server=10.42.110.100 |
plnode2.cip.gatech.edu | navis.gpolab.bbn.com | server=10.42.110.55 |
One-time prep commands run on each server
sudo yum -y install nc mkdir -p ~/giganetcat cd ~/giganetcat wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc
One-time prep commands run on each client
sudo yum -y install nc
Commands run on each server
server=<ipaddr> cd ~/giganetcat while true ; do nc -l $server 6110 < substrate.doc ; done
Commands run on each client
server=<ipaddr> cd rm -rf ~/giganetcat mkdir ~/giganetcat cd ~/giganetcat while true ; do nc $server 6110 > substrate.doc ; echo -n "$(date "+%F %T") " ; md5sum substrate.doc ; rm substrate.doc ; done
Results
Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.
Generated with
subnet=110 for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "d4fcf71833327fbfef98be09deef8bfb substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done
Analysis
(forthcoming)