[[PageOutline]]

= Continuation Round 8 =

In this round, we ran all ten slices on all seven sites (MyPLC at Rutgers is no longer available), for a week.

The raw logs are at http://www.gpolab.bbn.com/plastic-slices/continuation/round-8/.

= plastic-101 =

[ggw:PlasticSlices/Experiments#SteadyPing SteadyPing], using interval=.005, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| ganel.gpolab.bbn.com           || planetlab5.clemson.edu         || server=10.42.101.105 ||
|| planetlab4.clemson.edu         || plnode2.cip.gatech.edu         || server=10.42.101.101 ||
|| plnode1.cip.gatech.edu         || pl5.myplc.grnoc.iu.edu         || server=10.42.101.73  ||
|| pl4.myplc.grnoc.iu.edu         || of-planet2.stanford.edu        || server=10.42.101.91  ||
|| of-planet1.stanford.edu        || pl02.cs.washington.edu         || server=10.42.101.81  ||
|| pl01.cs.washington.edu         || wings-openflow-3.wail.wisc.edu || server=10.42.101.96  ||
|| wings-openflow-2.wail.wisc.edu || gardil.gpolab.bbn.com          || server=10.42.101.52  ||

== Commands run on each client ==

{{{
server=<ipaddr>
sudo ping -i .005 -s $((1500-8-20)) $server
}}}

== Results ==

Generated from the logs with

{{{
subnet=101
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 2 statistics pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

== Analysis ==

''(forthcoming)''

= plastic-102 =

[ggw:PlasticSlices/Experiments#SteadyPing SteadyPing], using interval=.005, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| navis.gpolab.bbn.com           || planetlab4.clemson.edu         || server=10.42.102.104 ||
|| planetlab5.clemson.edu         || plnode1.cip.gatech.edu         || server=10.42.102.100 ||
|| plnode2.cip.gatech.edu         || pl4.myplc.grnoc.iu.edu         || server=10.42.102.72  ||
|| pl5.myplc.grnoc.iu.edu         || of-planet2.stanford.edu        || server=10.42.102.91  ||
|| of-planet1.stanford.edu        || pl01.cs.washington.edu         || server=10.42.102.80  ||
|| pl02.cs.washington.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.102.95  ||
|| wings-openflow-3.wail.wisc.edu || bain.gpolab.bbn.com            || server=10.42.102.54  ||

== Commands run on each client ==

{{{
server=<ipaddr>
sudo ping -i .005 -s $((1500-8-20)) $server
}}}

== Results ==

Generated from the logs with

{{{
subnet=102
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 2 statistics pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

== Analysis ==

''(forthcoming)''

= plastic-103 =

[ggw:PlasticSlices/Experiments#SteadyPerfTCP SteadyPerf TCP], using port=5103, time=518400, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| sardis.gpolab.bbn.com          || of-planet1.stanford.edu        || server=10.42.103.90  ||
|| of-planet2.stanford.edu        || pl01.cs.washington.edu         || server=10.42.103.80  ||
|| pl02.cs.washington.edu         || ganel.gpolab.bbn.com           || server=10.42.103.51  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -B $server -p 5103 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -c $server -p 5103 -t 518400
}}}

== Results ==

Generated with

{{{
subnet=103
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -a -A 5 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-104 =

[ggw:PlasticSlices/Experiments#SteadyPerfUDP SteadyPerf UDP], using port=5104, time=518400, rate=11, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| ganel.gpolab.bbn.com           || wings-openflow-2.wail.wisc.edu || server=10.42.104.95  ||
|| pl5.myplc.grnoc.iu.edu         || sardis.gpolab.bbn.com          || server=10.42.104.53  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5104 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5104 -t 518400 -b 11M
}}}

== Results ==

Generated with

{{{
subnet=104
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-105 =

[ggw:PlasticSlices/Experiments#SteadyPerfUDP SteadyPerf UDP], using port=5105, time=518400, rate=6, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| wings-openflow-2.wail.wisc.edu || planetlab5.clemson.edu         || server=10.42.105.105 ||
|| planetlab4.clemson.edu         || navis.gpolab.bbn.com           || server=10.42.105.55  ||
|| bain.gpolab.bbn.com            || plnode2.cip.gatech.edu         || server=10.42.105.101 ||
|| plnode1.cip.gatech.edu         || wings-openflow-3.wail.wisc.edu || server=10.42.105.96  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5105 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5105 -t 518400 -b 6M
}}}

== Results ==

Generated with

{{{
subnet=105
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-106 =

[ggw:PlasticSlices/Experiments#SteadyPerfTCP SteadyPerf TCP], using port=5106, time=518400, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| planetlab5.clemson.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.106.95  ||
|| wings-openflow-3.wail.wisc.edu || plnode1.cip.gatech.edu         || server=10.42.106.100 ||
|| plnode2.cip.gatech.edu         || bain.gpolab.bbn.com            || server=10.42.106.54  ||
|| navis.gpolab.bbn.com           || planetlab4.clemson.edu         || server=10.42.106.104 ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -B $server -p 5106 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -c $server -p 5106 -t 518400
}}}

== Results ==

Generated with

{{{
subnet=106
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 5 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-107 =

[ggw:PlasticSlices/Experiments#SteadyPerfTCP SteadyPerf TCP], using port=5107, time=518400, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| planetlab5.clemson.edu         || pl4.myplc.grnoc.iu.edu         || server=10.42.107.72  ||
|| pl5.myplc.grnoc.iu.edu         || plnode2.cip.gatech.edu         || server=10.42.107.101 ||
|| plnode1.cip.gatech.edu         || pl02.cs.washington.edu         || server=10.42.107.81  ||
|| pl01.cs.washington.edu         || planetlab4.clemson.edu         || server=10.42.107.104 ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -B $server -p 5107 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -c $server -p 5107 -t 518400
}}}

== Results ==

Generated with

{{{
subnet=107
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 5 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-108 =

[ggw:PlasticSlices/Experiments#SteadyPerfUDP SteadyPerf UDP], using port=5108, time=518400, rate=8, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| wings-openflow-3.wail.wisc.edu || of-planet2.stanford.edu        || server=10.42.108.91  ||
|| of-planet1.stanford.edu        || pl5.myplc.grnoc.iu.edu         || server=10.42.108.73  ||
|| pl4.myplc.grnoc.iu.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.108.95  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5108 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5108 -t 518400 -b 8M
}}}

== Results ==

Generated with

{{{
subnet=108
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-109 =

[ggw:PlasticSlices/Experiments#SteadyPerfUDP SteadyPerf UDP], using port=5109, time=518400, rate=4, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| gardil.gpolab.bbn.com          || pl5.myplc.grnoc.iu.edu         || server=10.42.109.73  ||
|| pl4.myplc.grnoc.iu.edu         || pl02.cs.washington.edu         || server=10.42.109.81  ||
|| pl01.cs.washington.edu         || planetlab5.clemson.edu         || server=10.42.109.105 ||
|| planetlab4.clemson.edu         || of-planet1.stanford.edu        || server=10.42.109.90  ||
|| of-planet2.stanford.edu        || wings-openflow-3.wail.wisc.edu || server=10.42.109.96  ||
|| wings-openflow-2.wail.wisc.edu || ganel.gpolab.bbn.com           || server=10.42.109.51  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5109 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5109 -t 518400 -b 4M
}}}

== Results ==

Generated with

{{{
subnet=109
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-110 =

[ggw:PlasticSlices/Experiments#SteadyPerfTCP SteadyPerf TCP], using port=5110, time=518400, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| bain.gpolab.bbn.com            || pl01.cs.washington.edu         || server=10.42.110.80  ||
|| pl02.cs.washington.edu         || of-planet1.stanford.edu        || server=10.42.110.90  ||
|| of-planet2.stanford.edu        || pl4.myplc.grnoc.iu.edu         || server=10.42.110.72  ||
|| pl5.myplc.grnoc.iu.edu         || plnode1.cip.gatech.edu         || server=10.42.110.100 ||
|| plnode2.cip.gatech.edu         || navis.gpolab.bbn.com           || server=10.42.110.55  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -B $server -p 5110 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -c $server -p 5110 -t 518400
}}}

== Results ==

Generated with

{{{
subnet=110
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 5 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''