[[PageOutline]]

= Continuation Round 8 =

In this round, we ran all ten slices on all eight sites, for a week.

The raw logs are at http://www.gpolab.bbn.com/plastic-slices/continuation/round-8/.

= plastic-101 =

[ggw:PlasticSlices/Experiments#SteadyPing SteadyPing], using interval=.006, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| ganel.gpolab.bbn.com           || planetlab5.clemson.edu         || server=10.42.101.105 ||
|| planetlab4.clemson.edu         || plnode2.cip.gatech.edu         || server=10.42.101.101 ||
|| plnode1.cip.gatech.edu         || pl5.myplc.grnoc.iu.edu         || server=10.42.101.73  ||
|| pl4.myplc.grnoc.iu.edu         || orbitplc2.orbit-lab.org        || server=10.42.101.112 ||
|| orbitplc1.orbit-lab.org        || of-planet2.stanford.edu        || server=10.42.101.91  ||
|| of-planet1.stanford.edu        || pl02.cs.washington.edu         || server=10.42.101.81  ||
|| pl01.cs.washington.edu         || wings-openflow-3.wail.wisc.edu || server=10.42.101.96  ||
|| wings-openflow-2.wail.wisc.edu || gardil.gpolab.bbn.com          || server=10.42.101.52  ||

== Commands run on each client ==

{{{
server=<ipaddr>
sudo ping -i .006 -s $((1500-8-20)) $server
}}}

== Results ==

Generated from the logs with

{{{
subnet=101
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 2 statistics pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

== Analysis ==

''(forthcoming)''

= plastic-102 =

[ggw:PlasticSlices/Experiments#SteadyPing SteadyPing], using interval=.006, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| navis.gpolab.bbn.com           || planetlab4.clemson.edu         || server=10.42.102.104 ||
|| planetlab5.clemson.edu         || plnode1.cip.gatech.edu         || server=10.42.102.100 ||
|| plnode2.cip.gatech.edu         || pl4.myplc.grnoc.iu.edu         || server=10.42.102.72  ||
|| pl5.myplc.grnoc.iu.edu         || orbitplc1.orbit-lab.org        || server=10.42.102.111 ||
|| orbitplc2.orbit-lab.org        || of-planet2.stanford.edu        || server=10.42.102.91  ||
|| of-planet1.stanford.edu        || pl01.cs.washington.edu         || server=10.42.102.80  ||
|| pl02.cs.washington.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.102.95  ||
|| wings-openflow-3.wail.wisc.edu || bain.gpolab.bbn.com            || server=10.42.102.54  ||

== Commands run on each client ==

{{{
server=<ipaddr>
sudo ping -i .006 -s $((1500-8-20)) $server
}}}

== Results ==

Generated from the logs with

{{{
subnet=102
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 2 statistics pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

== Analysis ==

''(forthcoming)''

= plastic-103 =

[ggw:PlasticSlices/Experiments#SteadyPerfTCP SteadyPerf TCP], using port=5103, time=518400, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| of-planet1.stanford.edu        || ganel.gpolab.bbn.com           || server=10.42.103.51  ||
|| gardil.gpolab.bbn.com          || orbitplc1.orbit-lab.org        || server=10.42.103.111 ||
|| pl02.cs.washington.edu         || sardis.gpolab.bbn.com          || server=10.42.103.53  ||
|| orbitplc2.orbit-lab.org        || pl01.cs.washington.edu         || server=10.42.103.80  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -B $server -p 5103 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -c $server -p 5103 -t 518400
}}}

== Results ==

Generated with

{{{
subnet=103
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -a -A 5 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-104 =

[ggw:PlasticSlices/Experiments#SteadyPerfUDP SteadyPerf UDP], using port=5104, time=518400, rate=3, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| ganel.gpolab.bbn.com           || wings-openflow-2.wail.wisc.edu || server=10.42.104.95  ||
|| wings-openflow-3.wail.wisc.edu || orbitplc2.orbit-lab.org        || server=10.42.104.112 ||
|| orbitplc1.orbit-lab.org        || pl4.myplc.grnoc.iu.edu         || server=10.42.104.72  ||
|| pl5.myplc.grnoc.iu.edu         || sardis.gpolab.bbn.com          || server=10.42.104.53  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5104 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5104 -t 518400 -b 3M
}}}

== Results ==

Generated with

{{{
subnet=104
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-105 =

[ggw:PlasticSlices/Experiments#SteadyPerfTCP SteadyPerf TCP], using port=5105, time=518400, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| wings-openflow-2.wail.wisc.edu || planetlab5.clemson.edu         || server=10.42.105.105 ||
|| planetlab4.clemson.edu         || navis.gpolab.bbn.com           || server=10.42.105.55  ||
|| bain.gpolab.bbn.com            || plnode2.cip.gatech.edu         || server=10.42.105.101 ||
|| plnode1.cip.gatech.edu         || wings-openflow-3.wail.wisc.edu || server=10.42.105.96  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -B $server -p 5105 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -c $server -p 5105 -t 518400
}}}

== Results ==

Generated with

{{{
subnet=105
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 5 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-106 =

[ggw:PlasticSlices/Experiments#SteadyPerfUDP SteadyPerf UDP], using port=5106, time=518400, rate=3, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| planetlab5.clemson.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.106.95  ||
|| wings-openflow-3.wail.wisc.edu || plnode1.cip.gatech.edu         || server=10.42.106.100 ||
|| plnode2.cip.gatech.edu         || bain.gpolab.bbn.com            || server=10.42.106.54  ||
|| navis.gpolab.bbn.com           || planetlab4.clemson.edu         || server=10.42.106.104 ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5106 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5106 -t 518400 -b 3M
}}}

== Results ==

Generated with

{{{
subnet=106
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e "$host:\n\n{{{" ; grep -A 10 -B 1 "Client connecting" pgenigpolabbbncom_plastic$subnet\@$host.log ; echo -e "}}}\n" ; done
}}}

and then edited slightly to remove artifacts (like control characters, my prompt, etc).

== Analysis ==

''(forthcoming)''

= plastic-107 =

[ggw:PlasticSlices/Experiments#SteadyWeb SteadyWeb], using port=4107, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| planetlab5.clemson.edu         || pl4.myplc.grnoc.iu.edu         || server=10.42.107.72  ||
|| pl5.myplc.grnoc.iu.edu         || plnode2.cip.gatech.edu         || server=10.42.107.101 ||
|| plnode1.cip.gatech.edu         || pl02.cs.washington.edu         || server=10.42.107.81  ||
|| pl01.cs.washington.edu         || planetlab4.clemson.edu         || server=10.42.107.104 ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install pyOpenSSL patch
cd
rm -rf ~/gigaweb
mkdir -p ~/gigaweb/docroot

cd ~/gigaweb
wget http://code.activestate.com/recipes/442473-simple-http-server-supporting-ssl-secure-communica/download/1/ -O httpsd.py
wget http://groups.geni.net/geni/attachment/wiki/PlasticSlices/Experiments/httpsd.py.patch?format=raw -O httpsd.py.patch
patch httpsd.py httpsd.py.patch
rm httpsd.py.patch

cd ~/gigaweb/docroot
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc

cd ~/gigaweb
openssl genrsa -passout pass:localhost -des3 -rand /dev/urandom -out localhost.localdomain.key 1024
openssl req -subj /CN=localhost.localdomain -passin pass:localhost -new -key localhost.localdomain.key -out localhost.localdomain.csr
openssl x509 -passin pass:localhost -req -days 3650 -in localhost.localdomain.csr -signkey localhost.localdomain.key -out localhost.localdomain.crt
openssl rsa -passin pass:localhost -in localhost.localdomain.key -out decrypted.localhost.localdomain.key
mv -f decrypted.localhost.localdomain.key localhost.localdomain.key
cat localhost.localdomain.key localhost.localdomain.crt > localhost.localdomain.pem
rm localhost.localdomain.key localhost.localdomain.crt localhost.localdomain.csr
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/gigaweb/docroot
python ../httpsd.py $server 4107
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
cd
rm -rf ~/gigaweb
mkdir ~/gigaweb
cd ~/gigaweb
while true ; do wget --no-check-certificate https://$server:4107/substrate.doc -O substrate.doc ; echo -n "md5sum: " ; md5sum substrate.doc ; rm substrate.doc ; done
}}}

== Results ==

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

Generated with

{{{
subnet=107
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "md5sum:" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "md5sum: d4fcf71833327fbfef98be09deef8bfb" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done
}}}

== Analysis ==

''(forthcoming)''

= plastic-108 =

[ggw:PlasticSlices/Experiments#SteadyWeb SteadyWeb], using port=4108, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| wings-openflow-3.wail.wisc.edu || of-planet2.stanford.edu        || server=10.42.108.91  ||
|| of-planet1.stanford.edu        || orbitplc1.orbit-lab.org        || server=10.42.108.111 ||
|| orbitplc2.orbit-lab.org        || pl5.myplc.grnoc.iu.edu         || server=10.42.108.73  ||
|| pl4.myplc.grnoc.iu.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.108.95  ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install pyOpenSSL patch
cd
rm -rf ~/gigaweb
mkdir -p ~/gigaweb/docroot

cd ~/gigaweb
wget http://code.activestate.com/recipes/442473-simple-http-server-supporting-ssl-secure-communica/download/1/ -O httpsd.py
wget http://groups.geni.net/geni/attachment/wiki/PlasticSlices/Experiments/httpsd.py.patch?format=raw -O httpsd.py.patch
patch httpsd.py httpsd.py.patch
rm httpsd.py.patch

cd ~/gigaweb/docroot
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc

cd ~/gigaweb
openssl genrsa -passout pass:localhost -des3 -rand /dev/urandom -out localhost.localdomain.key 1024
openssl req -subj /CN=localhost.localdomain -passin pass:localhost -new -key localhost.localdomain.key -out localhost.localdomain.csr
openssl x509 -passin pass:localhost -req -days 3650 -in localhost.localdomain.csr -signkey localhost.localdomain.key -out localhost.localdomain.crt
openssl rsa -passin pass:localhost -in localhost.localdomain.key -out decrypted.localhost.localdomain.key
mv -f decrypted.localhost.localdomain.key localhost.localdomain.key
cat localhost.localdomain.key localhost.localdomain.crt > localhost.localdomain.pem
rm localhost.localdomain.key localhost.localdomain.crt localhost.localdomain.csr
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/gigaweb/docroot
python ../httpsd.py $server 4108
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
cd
rm -rf ~/gigaweb
mkdir ~/gigaweb
cd ~/gigaweb
while true ; do wget --no-check-certificate https://$server:4108/substrate.doc -O substrate.doc ; echo -n "md5sum: " ; md5sum substrate.doc ; rm substrate.doc ; done
}}}

== Results ==

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

Generated with

{{{
subnet=108
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "md5sum:" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "md5sum: d4fcf71833327fbfef98be09deef8bfb" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done
}}}

== Analysis ==

''(forthcoming)''

= plastic-109 =

[ggw:PlasticSlices/Experiments#SteadyNetcat SteadyNetcat], using port=6109, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| gardil.gpolab.bbn.com          || pl5.myplc.grnoc.iu.edu         || server=10.42.109.73  ||
|| pl4.myplc.grnoc.iu.edu         || pl02.cs.washington.edu         || server=10.42.109.81  ||
|| pl01.cs.washington.edu         || planetlab5.clemson.edu         || server=10.42.109.105 ||
|| planetlab4.clemson.edu         || of-planet1.stanford.edu        || server=10.42.109.90  ||
|| of-planet2.stanford.edu        || wings-openflow-3.wail.wisc.edu || server=10.42.109.96  ||
|| wings-openflow-2.wail.wisc.edu || ganel.gpolab.bbn.com           || server=10.42.109.51  ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install nc
mkdir -p ~/giganetcat
cd ~/giganetcat
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc
}}}

== One-time prep commands run on each client ==

{{{
sudo yum -y install nc
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/giganetcat
while true ; do nc -l $server 6109 < substrate.doc ; done
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
cd
rm -rf ~/giganetcat
mkdir ~/giganetcat
cd ~/giganetcat
while true ; do nc $server 6109 > substrate.doc ; echo -n "$(date "+%F %T")  " ; md5sum substrate.doc ; rm substrate.doc ; done
}}}

== Results ==

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

Generated with

{{{
subnet=109
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "d4fcf71833327fbfef98be09deef8bfb  substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done
}}}

== Analysis ==

''(forthcoming)''

= plastic-110 =

[ggw:PlasticSlices/Experiments#SteadyNetcat SteadyNetcat], using port=6110, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| bain.gpolab.bbn.com            || pl01.cs.washington.edu         || server=10.42.110.80  ||
|| pl02.cs.washington.edu         || of-planet1.stanford.edu        || server=10.42.110.90  ||
|| of-planet2.stanford.edu        || orbitplc2.orbit-lab.org        || server=10.42.110.112 ||
|| orbitplc1.orbit-lab.org        || pl4.myplc.grnoc.iu.edu         || server=10.42.110.72  ||
|| pl5.myplc.grnoc.iu.edu         || plnode1.cip.gatech.edu         || server=10.42.110.100 ||
|| plnode2.cip.gatech.edu         || navis.gpolab.bbn.com           || server=10.42.110.55  ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install nc
mkdir -p ~/giganetcat
cd ~/giganetcat
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc
}}}

== One-time prep commands run on each client ==

{{{
sudo yum -y install nc
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/giganetcat
while true ; do nc -l $server 6110 < substrate.doc ; done
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
cd
rm -rf ~/giganetcat
mkdir ~/giganetcat
cd ~/giganetcat
while true ; do nc $server 6110 > substrate.doc ; echo -n "$(date "+%F %T")  " ; md5sum substrate.doc ; rm substrate.doc ; done
}}}

== Results ==

Since we transfered the file to each client hundreds (if not thousands) of times, we didn't save all the copies, but we did generate an MD5 checksum after each download, and log that, so we ran some grep commands on the logs to count the number of total checksums printed in each log, and the number where the checksum had the expected value.

Generated with

{{{
subnet=110
for host in $(awk 'NR%2==1' ~/plastic-slices/logins/logins-plastic-$subnet.txt | sed -r -e 's/.+@//') ; do echo -e -n "$host:\n\n{{{\ntotal md5sum lines: " ; grep "substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e -n "matching md5sum lines: " ; grep "d4fcf71833327fbfef98be09deef8bfb  substrate.doc" pgenigpolabbbncom_plastic$subnet\@$host.log | wc -l ; echo -e "}}}\n" ; done
}}}

== Analysis ==

''(forthcoming)''